產品概述Brief Introduction：
STM立磨是我公司為解決工業磨粉耗能高的技術難題，組織一流技術專家，經過多年潛心設計研制而開發出的高效率低能耗粉碎機。該產品采用了新穎的粉磨原理、合理可靠的結構設計、高耐磨的合金材料并汲取了多種粉磨設備的技術精華，產品的各項性能指標遠遠超過了傳統粉磨設備，尤其對高硬度、難加工物料有很好的粉磨效果，干濕法均可加工生產。該產品金屬磨耗小、揚塵少、結構簡單而堅固、操作維護非常簡便，是工業磨機一次“革命性”的技術突破，可為用戶帶來較高的經濟效益，真正實現了工業磨粉的高效低能耗，開創了工業制粉的新紀元。
STM Vertical Mill is a high efficiency and low consumption mill, designed by our numbers engineers, for solving the problem of high energy consumption in mill industry. It adopts new grinding principle, reasonable structure, strong bearing alloy materials and absorbs lots of technical essence of mill, all indicators of our mill are better than that of the traditional mill greatly. Especially, it is very good for crushing high hardness and hardworking materials and it can work under dry or wet condition. Our machine has these characteristics: small metal worn, little dust, simple and firm structure, and easy maintenance. It is a revolutionary technical changing in mill industry. It can bring higher economic benefit to customers and it has really realized the dream of industrial mill---high efficiency and low consumption. It is the new era for powder making.
適用范圍Application：
該機是一種高效節能、用途廣泛的新型粉磨設備。廣泛應用于建材、化工、冶金、礦山、鋼鐵、電力等行業。主要用于將塊狀物料磨成粗粉（細粉、細砂與中砂組成的混合物），例如水泥（生熟料）、石英、長石、方解石、石膏、石灰石、白云石、磷礦石、煤、煤矸石、礦渣、鋯英砂、滑石、花崗巖、鉀長石、大理石、重晶石、陶瓷、玻璃等莫氏硬度9.5級以下的高、中、低硬度物料。
Our machine is high efficiency and low consumption. It is widely used in: building, chemical, chemical fertilizer, metallurgy, mining, nonmetal, abrasive, bearing materials, ceramic, steel, thermal power, bricks & tiles, coal industry, etc. It can grind lump materials into coarse powder (here coarse powder means the mixer of fineness powder, fineness sand, and medium sand.). There are thousands of materials which can be grinded by our equipment, and here are some of them and they are just for you consultation. They are cement (raw meal and cement clinker), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, fluorite, aedelforsite, phosphate ore, fused calcium magnesium phosphate,
carbamide, electrolytic manganese metal, ferromanganese, coal, gangue, slag, zirconium, steatite, granite, orthoclase, marble, barites, ceramics, glass, etc. All the materials whose moth’s hardness is under 9.5 grades can be grinded.
工作原理Working Principle:
安裝在主機頂部的減速機，通過聯軸器連接中心軸旋轉，中心軸帶動磨輥吊架旋轉，磨輥裝在吊架上沿磨環內周一起滾動。物料從機器上部側面進料斗進入，分兩路散落在同中心軸一起旋轉的散料盤上，沿圓周通道均勻送入磨環和磨輥之間，被磨輥碾壓碎后從下部排料口排出。
The speed reducer upper installed on the main machine makes central axis rotate through shaft coupling, and roller hanger rotates with central axis, and rollers on the hanger roll around the inside of ring. The materials come into inlet from upper side of machine, and they fall down onto the dispersing materials plate rotating with central axis in two ways, then the materials are sent into passage between rollers and rings, after they are grinded into pieces, they are discharged from the down lip.
技術優勢Technical Advantages：
STM立磨采用新穎的輥壓粉磨原理和科學的結構設計，汲取了多項預粉磨技術精華。同傳統的輥式磨粉機、細碎機、輥壓機、各類沖擊式粉碎機相比具有顯著的優勢，真正實現了預粉技術的高效、節能、環保。
STM Vertical Mill adopts new planishing and grinding principle and scientific structure, and absorbs numbers of preparing grinding technology. Compared with traditional machines, such as roller mill, fine crusher, planishing device, kinds of impact mill, it has very remarkable advantages, and it is really realized higher efficiency, lower consumption and environmental protection of preparing grinding technology
1、設計新穎、結構合理。STM立磨采用了中速中壓反復碾壓的原理，合理設計，物料自上而下自由落入，粉磨高硬度、難加工材料時磨輥磨環上、中、下部獲得同等程度磨損，產量比較均勻。巧妙設計，使得螺栓、鐵塊等非可磨性物料的進入不會對機器造成損害。STM立磨不需要配備其它旋風分離器和管道，占地空間小。
1. New design and reasonable structure. Our mill adopts medium speed and pressure, and repeated planishing principle, and its design is reasonable. The materials fall down by gravity. The materials are high strength and hardworking, while all the parts of rollers and ring will be worn evenly and capacity is compared evenly too. Because of ingenious design, when the ungrindable materials such as bolts or pig iron come into machine, they are not harmful to the machine. It is unnecessary to equip with cyclone and pipes, so it takes up small space.
2、經過STM立磨處理后的物料物理性質得到改變，物料的易磨性能顯著提高。該機所粉磨出的物料呈不規則的多菱形，且內部晶格已經破壞、組織結構松散，出磨物料大小顆粒均有微裂痕。這樣的物料進行二次研磨時，減少了其破碎負擔，功能已趨向于碾磨，因此，可以大大提高二次粉磨的產量。
2. After grinded by STM Vertical Mill, physical characteristic is changed and their grindable characteristic is improved greatly. The grinded materials become irregular multiple-unit, and their inside lattice are already broken, the structure of the organization is loose, and the final sizes all have haircuts. Thus, when the materials are grinded for the second time, the machine is mainly doing grinding work not crushing work, so the capacity of second grind is improved greatly.
3、STM立磨粉磨出的物料破碎比大，細粉含量高。大顆粒物料入STM立磨時，通過磨輥和襯板的凹凸齒，進行了軋臼式的粉碎而成細粒，掉入磨輥與襯板之間，形成料層。在彈簧裝置的壓力下，磨輥在料層上作數十次柔性擠壓使物料成粉末，粉磨效果十分理想。產品的細度可調節，除了能產生大量小于100目的細粉外，還使物料顆粒受到多次碾壓而產生大量微裂痕，且最大顆粒粒徑可控制在3mm以下，更易于二次粉磨。
3. The crushing ratio of final products of STM Vertical Mill is large and fineness sizes share is large too. When the large materials come into STM Vertical Mill, and through sculptured roller and plate, they are grinded into fineness size by rolling crush, and then they fall down into space between roller and plate, and form a material bed. Under the spring device’s pressure, rollers do numbers flexible extrusion to material bed and make them become fineness, and the result is very ideal. The fineness of final products can be adjustable. Other than producing large quantity fineness which is smaller than 100 meshes, this mill also can make materials have large haircuts by numbers of grinded. The max final size is below 3mm, and it is easy for second time grind.
4、STM立磨易損件使用壽命長，維修量少。傳統粉磨類設備，靠高速旋轉對物料進行強行剪切，易損件之間直接碰撞,造成易損件磨損快、消耗高、揚塵大，以致于調節、維修頻繁，影響正常生產。STM立磨對物料的碾壓是料層的擠壓，磨輥既公轉又自轉，避免了磨輥與襯板之間的直接碰撞，既提高了易損件壽命又最大限度地減少了物料加工過程中機械對加工粉體的污染。
4. Long service life of easy worn parts and little maintenance. The traditional grinding equipments depend on high speed rotation to do forcing crush to materials, and the connection between easy worn parts is direct, so consumption of these parts is fast and high, and large quantity dust, thus adjustment and maintenance is frequent, and the normal production will not be influenced. This mill’s grind is grinding to material bed, and roller does both revolution and rotation, thus this avoids direct collision between rollers and the plate. This is not only improving service life of easy worn parts, but also reducing pollution to materials greatly in the grinding process.
5、STM立磨機械性能良好、操作簡單、維護便利、能耗少、運行成本低、干濕法均可生產。STM立磨設計合理，結構簡單，安裝簡單方便，可節省土建投資；而且噪音低，揚塵少，具有很好的環保效果。
5.This machine has these characteristics: good mechanical property, easy to operate, convenient to maintain, lower consumption, lower working cost, dry or wet producing; reasonable design, simple structure, easy to install, lower cost of infrastructure; lower noise and little dust with good environmental protection.
上海西芝電力設備有限公司是專業從事電力設備、工業制粉和礦山機械研發、生產與銷售的國際型專業化企業，產品遠銷澳大利亞、東南亞、中亞、南亞、南美、中東、東歐及非洲等國家和地區，以可靠穩定的質量飲譽國內外。
西芝公司擁有國際一流的生產線和現代化檢測基地，產品全部按照ISO9001：2000國際質量體系標準進行設計、生產、制造和檢測。目前公司開發生產的系列工業磨粉機及礦山設備已廣泛應用于電力、冶金、礦山、化工、鋼鐵、石油、建材等行業。
西芝公司長期堅持“科技與品質同行”的經營創新理念，依托和采用美國、德國、日本等國家的先進技術和工藝，不斷引進世界一流的制粉技術和先進的管理控制體系。公司長年組織大量技術專家和相關專業技術人員對產品進行改良和創新，不斷開發出具有自主知識產權、國際領先的產品。
近年來公司不斷吸納業內高級管理人才、科研精英及大中專院校的應屆畢業生加盟，現有工商管理碩士（MBA）6人、高級工程師12人、工程師20人，具有本科及以上學歷的員工占到全體員工總數的60%，技術研究院有多名享受國務院特殊津貼的著名中青年專家，擁有多項國家技術專利成果，已形成了一支團結互助、開拓進取的協作團隊，是企業發展的動力和源泉。
追求品質、追求卓越、追求客戶滿意是全體“西芝人”的至高目標，公司堅持以“誠信”的態度、“務實”的作風和“共贏”的目的與廣大中外客戶攜手共創新的輝煌 。
