閱讀排行榜

手寫達人

猜您喜歡

標題雞白細胞介素18（IL-18）elisa試劑盒英文說明書

提供者：上海勁馬實驗設備有限公司發布時間：2011/12/21 閱讀次數：8764次 >>進入該公司展臺

雞白細胞介素18（IL-18）elisa試劑盒英文說明書

FOR RESEARCH USE ONLY

Assay range：5 ng/L -160 ng/L 96determinations

Purpose

This kit allows for the determination of IL-18 concentrations in Chickenserum, cellculture supernates ａnd other biological fluids

Principle of the assay

The kit assay Chicken IL-18level in the sample，use Purified Chicken IL-18antibody to coat microtiter plate wells, make solid-phase antibody, then addIL-18to wells,CombinedIL-18 antibody which With HRP labeled,become antibody - antigen - enzyme-antibody complex, after washing Completely,Add TMB substrate solution,TMB substrate becomes blue color At HRP enzyme-catalyzed,reaction is terminated by the addition of a sulphuric acid solution ａnd the color change is measured spectrophotometrically at a wavelength of 450 nm. The concentration ofChicken IL-18in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Materials provided with the kit

1	wash solution	20ml×1bottle	7	Stopp Solution	6ml×1 bottle
2	HRP-Conjugate reagent	6ml×1 bottle	8	Standard（320ng/L）	0.5ml×1 bottle
3	Microelisa stripplate	12well×8strips	9	Standard diluent	1.5ml×1bottle
4	Sample diluent	6ml×1 bottle	10	Instruction	1
5	Chromogen Solution A	6ml×1 bottle	11	Closure plate membrane	2
6	Chromogen Solution B	6ml×1 bottle	12	Sealed bags	1

Specimen requirements

1. extractas soon as possible after Specimen collection,and according to the relevant literature, ａnd should be experiment as soon as possible after the extraction. If it can’t, specimen can be kept in -20 ℃ to preserve, Avoid repeated freeze-thaw cycles.

2. Can’t detect the sample which contain NaN3, because NaN3 inhibits HRP active.

Assay procedure

1. Dilute ａnd add sample:Dilute Original density Standard as follow table:

160ng/L	5 Standard	150μl Original density Standard+150μl Standard diluent
80ng/L	4 Standard	150μl 5 Standard+150μl Standard diluent
40ng/L	3 Standard	150μl 4 Standard+150μl Standard diluent
20ng/L	2 Standard	150μl 3 Standard +150μl Standard diluent
10ng/L	1 Standard	150μl 2 Standard +150μl Standard diluent

2.add sample：Set blank wells separately （blank comparison wells don’t add sample ａnd HRP-Conjugate reagent, other each step operation is same）. testing sample well. add Sample dilution 40μl to testing sample well, then add testing sample 10μl （sample final dilution is 5-fold）, add sample to wells , don’t touch the well wall as far as possible, and Gently mix.

3.Incubate: After closing plate with Closure plate membrane ,incubate for 30 min at 37℃.

4.Configurate liquid: 30-fold（or 20-fold） wash solution diluted 30-fold （or 20-fold） with distilled water ａnd reserve.

5.washing：Uncover Closure plate membrane, discardLiquid, dry by swing, add washing buffer to every well, still for 30s then drain,repeat 5 times, dry by pat.

6.add enzyme：Add HRP-Conjugate reagent 50μl to each well, except blank well.

7.incubate：Operation with 3.

8.washing：Operation with 5.

9.color：Add Chromogen Solution A 50ul and Chromogen Solution B to each well, evade the light preservation for 15 min at 37℃

10.Stop the reaction：Add Stop Solution50μl to each well, Stop the reaction（the blue color change to yellow color）.

11.assay：take blank well as zero , Read absorbance at 450nm after Adding Stop Solution ａnd within 15min.

Important notes

1. The kit takes out from the refrigeration environment should be balanced 15-30 minutes in the room temperature, ELISA plates coated if has not use up after opened, the plate should be stored in Sealed bag.

2. washing buffer will Crystallization separation, it can be heated the water helps dissolve when dilute . Washing does not affect the result.

3. add Sample with sampler Each step, And proofread its accuracy frequently, avoids the experimental error. add sample within 5 min, if the number of sample is much , recommend to use Volley .

4. if the testing material content is excessively higher （The sample OD is bigger than the first standard well ）,please dilute Sample （n-fold）, Please diluenteand multiplied by the dilution factor.（×n×5）.

5. Closure plate membrane only limits the disposable use, to avoid cross-contamination.

6. The substrate evade the light preservation.

7. Please according to use instruction strictly, The test result determination must take the microtiter plate reader as a standard.

8. All samples, washing buffer ａnd each kind of reject should according to infective material process.

9. Do not mix reagents with those from other lots.

Storage ａnd validity

1．Storage： 2-8℃.

2．validity： six months

關鍵詞：

上一篇：一般銑床的分類有哪些? 下一篇：MB100SS軸承MB110軸承MB110SS軸承MB120軸承MB120SS軸承

該提供者的其它文獻

版權聲明

① 凡本網注明"來源：易推廣"的所有作品，版權均屬于易推廣，未經本網授權不得轉載、摘編或利用其它方式使用。已獲本網授權的作品，應在授權范圍內

使用，并注明"來源：易推廣"。違者本網將追究相關法律責任。

② 本信息由注冊會員：上海勁馬實驗設備有限公司發布并且負責版權等法律責任。

易推廣客服微信

欧美三级欧美成人高清,麻豆网神马久久人鬼片,男同gay自慰网站,欧美日韩精品一区二区三区激情,在线,男人的天堂av