LMG95單相高精度電能/功率分析儀

0.03%總精度,50kHz帶寬,100kHz采樣速率,連續無間隙采樣測量分析過程.單通道,全球最高端功率分析儀

功率分析儀大中國地區總代理，亞太區維修服務中心。
產品特征：

• 測量電壓,電流,功率,功率因數,電能等參量
• 輸入通道隔離.極低的容抗和極高的動態共模抑制比及抗干擾能力
• DC to 50 kHz 高精度帶寬, 即使在功率因數 <0.01 時,也能做到高精度測量.
• 連續無間隙采樣測量過程
• 諧波及閃變測量,符合標準 EN 61000-3-2 和 EN 61000-3-3
• 諧波及間諧波分析,都可達99次
• 瞬態功能
• 模擬量和數字量輸入輸出
• 外部電壓分壓器輸入
• 電腦接口,記憶卡插口
• 單色屏幕顯示:4-8個測量值,波形圖,計算圖表,柱狀圖
• 通用的接口,經濟及方便使用
• 帶公式編輯器
• 帶LabVIEW 驅動

典型應用:
    開關電源，AC/DC電機和發電機，電子及傳統的變壓器, ballasts, PWM變頻器，超聲波發生器，鐵磁損耗，節能照明，電介柵放電燈，低壓和高壓放電燈，電能及功率標定基準 

LMG95 Single Phase Precision Power Analyzer

Typical Applications:
Measurements on switching power supplies, AC/DC motors ａnd generators, electronic ａnd conventional transformers, ballasts, PWM frequency inverters, ultra-sonic generators, ferromagnetic core losses, lighting, dielectric barrier discharge lamps, low ａnd high pressure discharge lamps, calibration reference for power ａnd energy

Measures voltage, current, inrush current, power, power factor, energy etc.

Isolated measurement inputs with extremely low capacitance against earth to assure high dynamics CMR ａnd interference immunity

DC to 500 kHz precision bandwidth, precise at low cosphi <0.01

Absolutely gap-free measuring process

Harmonics ａnd flicker measurement according to EN61000-3-2 ａnd EN61000-3-3

Harmonics ａnd interharmonics up to the 99th harmonic resp. up to 99 interharmonics

Transient function

Analog ａnd digital in/outputs

External shunt voltage input

PC interfaces, memory-card slot

Graphical monochrome display to show 4 to 8 measured values, wave form, diagrams of calculated values ａnd bar charts

Ergonomic user friendly interface

Formula editor

LabVIEW driver