CHKQ203/75鉆桿鉗-Slanthole鉆桿鉗價格-江蘇鉆桿鉗廠家
本系列鉆桿鉗適用于石油、礦場鉆井作業。使用本鉗能起到安全、省力，提高鉆井施工效率。本鉗具有以下特點：
背鉗夾緊及換檔采用壓縮空氣（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）；
旋扣鉗和扭矩鉗一體結構（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）；
可不停車換檔（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）；
新舊接頭均卡緊可靠；
正反向都可產生最大扭矩和轉速（除CHKQ203/75外）。
注：ZQ203/75X和ZQ203/145X型采用行星爪夾緊機構，在適應范圍內不需要更換任何零件。
    CHKQ203/75型為斜井鉆機專用鉆井鉗，鉗體最大移送距離700 mm，鉗體升降范圍0~360 mm，一次沖扣轉角30°，適應斜井角度0～45°。
The Drill Pipe Tong is applicable in the petroleum ａnd mine drilling, it is safety ａnd labor saving, ａnd improving the working efficiency. The tongs have the following features:
Using pneumatic power to shift ａnd drive backup tong （ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）.
It is a integral mechanism made by spin tong ａnd torque tong（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）.
Changing gear allowed during operation（ZQ162/50A，ZQ203/75X，ZQ203/100，ZQ203/125）.
New or old drilling pipe joint could be clamped reliably
Both directions could run the maximum torque ａnd rotation speed（except CHKQ203/75）.
 Remark:Model ZQ203/75X ａnd ZQ203/145X: using planet claw, needn’t to change any parts in application range.
        Model CHKQ203/75 drill pipe tong used Specifically for slant hole drilling rig,maximum thrust distance of tong is 27″.Rise ａnd fall range of the tong is 0~14″.Washed-up corner one time is 30°.The available corner of inclined well is 0～45°.

鹽城特達///CHKQ203/75鉆桿鉗-Slanthole鉆桿鉗價格-江蘇鉆桿鉗廠家