Xaminer MD2200 5500LS



為什么條碼檢測這么重要？
Verification guarantees a successful, fi  rst time scan rate. Without verification, a bar code might not scan correctly. Simply scanning a bar code with a mobile scanning device does not ensure accurate bar code verification as a bar code that can be read successfully by one scanner might not be successfully read by another. By verifying, you can effectively prevent charge backs or other penalties from trading partners. 簡單地理解，不重要，你的客戶會要求你有個條碼檢測儀嗎？

我可以用條碼檢測儀來進行條碼讀取嗎？
No, a verifier should not be used for data capture purposes. The function of a verifier is to analyze the quality of a bar code. Verification instruments use special optics ａnd software to evaluate the print quality of a bar code; they do not have the memory capacity to store scanned information. 其實不是不可以，如果你這樣做，那就是用牛刀來殺雞了。

條碼檢測儀是怎么工作的？
Verifiers provide a print-quality analysis of bar codes based on accepted industry standards. Each bar code scanned receives a grade against set criteria ａnd specifi  c problems are identifi  ed according to the grade assigned. 


到底哪種條碼檢測儀適合我呢？
There are different types of verification equipment with different optical devices, including wand ａnd laser-based units. Your working environment, the type of bar codes you are verifying ａnd the grading system you plan to benchmark your barcodes against usually determines which type of verifi  er is best for your operation. 
Unlike the Stratix Xaminer series, a standard laser gun verifi  er grades a bar code using only three of the ANSI parameters. A standard laser gun verifi  er is unable to measure refl  ectance because the laser is not positioned at a fixed distance or fixed angle.Advanced scanning laser devices like the Stratix Xaminer series offer full ANSI verifi  cation, coupled with the easy-to-use characteristics of a standard laser gun verifi  er. A base assures that the needed fi  xed distance ａnd angle are both present to allow for full ANSI verifi  cation. Laser-based units are best used on curved surfaces. A wand-based unit is more diagnostic than a regular laser gun verifi  er, because it can also gather information to allow for full ANSI verification. It is best used on fl  at surfaces. A 6-mil wand should be used to verify UPC codes; however, when working with shipping codes a 10-mil or 20-mil wand is best. 這里英文說得有點復雜了，簡單而言，要便宜找HHP QC800系列（那只能算有個檢測儀，根本不準，同一個條碼各種等級都可以給你，馬上會停產），要準確找WEBSCAN韋博斯根或Eyact易閱的（同一個條碼，絕不會有兩個不同的等級出現，保證準確無爭議），要便宜又準確的？沒有!!相對便宜又準確的，找RJS D4000或Xaminer 9020.要知道更多信息？馬上聯系廣州利佰特就可以了。

ANSI到底是什么？
ANSI is an acronym for The American National Standards Institute. It publishes the industry standards that measure bar code quality. An ANSI grade （A through F） is given to a bar code using nine different ANSI parameters that measure the quality of the symbol. Refer to ANSI Document X3.182-1990.