產品展示
人5核苷酸酶(5-NT)ELISA試劑盒廠家
點擊次數:18發布時間:2016/8/17 0:15:12

更新日期:2016/8/17 0:15:12
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
【友情提示】:本產品僅供科研研究使用,不得用于人體臨床直接檢測。避免給您帶來不必要的損失,請仔細閱讀購買說明!
【人5核苷酸酶(5-NT)ELISA試劑盒廠家】酶法檢測試驗所需自備物品:
1. 酶標儀(450nm 波長濾光片)
2. 高精度移液器,EP 管及一次性吸頭
3. 37℃恒溫箱,雙蒸水或去離子水
4. 吸水紙
試劑盒安全性提示:
1.工作人員實驗中避免直接接觸終止液和底物A、B。一旦接觸到這些液體,請盡快用水沖洗。
2.實驗中不要吃喝、抽煙或使用化妝品。
3.不要用嘴吸取試劑盒里的任何成份。
【人5核苷酸酶(5-NT)ELISA試劑盒廠家】操作注意事項:
1.試劑盒應按標簽說明書儲存,使用前恢復到室溫30分鐘后方可使用。稀稀過后的標準品應丟棄,不可保存。
2.實驗中不用的板條應立即放回包裝袋中,密封保存,以免變質。
3.不用的其它試劑應包裝好或蓋好。不同批號的試劑不要混用.請?jiān)谠噭┖斜Y|(zhì)前使用。
4.使用一次性的吸頭以免交叉污染,吸取終止液和底物A、B液時,避免使用帶金屬部分的加樣器。
5.使用干凈的塑料容器配置洗滌液。使用前充分混勻試劑盒里的各種成份及樣品。
6.洗滌酶標板時應充分拍干,不要將吸水紙直接放入酶標反應孔中吸水。
7.底物A應揮發,避免長時間打開蓋子。底物B對光敏感,避免長時間暴露于光下。避免用手接觸,有毒。實驗完成后應立即讀取OD值。
8.加入試劑的順序應一致,以保證所有反應板孔溫育的時間一樣。
9.按照說明書中標明的時間、加液的量及順序進行溫育操作。
【人5核苷酸酶(5-NT)ELISA試劑盒廠家】齊一生物客戶寄標本時需注明以下情況:
1、標本編號;2、所測項目;3、是否做復孔;3、聯系方式;4、實驗后標本是否寄回。
客戶必知:
客戶應對所提供的材料及信息負責,如因客戶提供的材料及信息不準確而引起的實驗延誤或經濟損失由客戶承擔。
齊一生物供應ELISA試劑盒檢測的目的是為實驗提供準確可靠的定量分析實驗依據。為了保證實驗數據的可靠性,在實驗過程中必須堅持全面質量控制和全過程質量控制。在收集標本前都必須有一個完整的計劃。
樣本保存條件:
1.2-8℃冰箱*多放2周
2.-20到-50℃的冰箱可以放3-6個月
3.-50℃以下的冰箱,可以放一年
樣本收集
1.血清樣本用干燥管(紅色)或者促凝管(黃色)收集
2.血漿用抗凝管,一般有EDTA抗凝(紫色)、枸櫞酸鈉抗凝(黑色或者藍色)
3.動物組織勻漿(細胞):
1g組織加入9ml PBS(濃度為0.1M,pH為7.4的)測分泌型指標
1g組織加入1ml組織裂解液加入8ml PBS 測細胞內
糞便樣本:1g樣本+9ml PBS(濃度為0.01M,pH為7.4的)
沒有PBS的話也可以用一下生理鹽水,還是用PBS
樣本離心轉速及時間
1.試管采集的樣本:3000轉,離心五分鐘取上清
2.離心管或者EP管采集的樣本:5000--8000轉3分鐘取上清
3..樣本保存--如果樣品不立即使用,應將其分成小部分-70 ℃保存,避免反復冷凍。盡可能的不要使用溶血或高血脂血。如果血清中大量顆粒,檢測前先離心或過濾。不要在37℃或更高的溫度加熱解凍。應在室溫下解凍并確保樣品均勻地充分解凍。
【人5核苷酸酶(5-NT)ELISA試劑盒廠家】齊一生物供應,以上資料供參考如有疑問需要詳細資料請聯系我們客服人員,齊一生物銷售:021-6034 8496;181214 53965;173021 04490
9022322 Power Supply, Controller, careHPV CNY
9022121 Tool. Rotor Hub Height Jig, RGQ CNY
9021404 RGQ MDx User manuals for IVD use(Europe) CNY
9238610 Collet chuck CNY
9238479 Motor, syringe, RapidPlate CNY
9238152 Elution Microplate Adapter 8000, SBS CNY
9237932 Syringe, 100µl CNY 【人5核苷酸酶(5-NT)ELISA試劑盒廠家】
9240663 Nut, Flangeless,1/4-28, Black, AP CNY
9240634 Power Supply, Main PCB, Aztec, AP196/98 CNY
9240630 Power Supply, 5VDC 1.5 AMP, AP96 CNY
9240593 Unload Valve, Pump, Pressure, AP196/98 CNY
9240562 Fuse, PCB, 315, Eppendorf, AP196/98 CNY
9240536 Motor Assy, SiNug, 17, All, AP96/196 CNY
9240514 CD R/W, AP196/98 CNY
9240504 PC-104, AP98 CNY
9240346 Autopure, Full Agreement "Repair service delivery: onsite
Service response time (repair): 48 hours/2 business days
Periodic inspection/maintenance: yes, 1/agreement year
Inspection/maintenance delivery: onsite
Cost coverage for repair parts: yes, included
Cost coverage for labor: yes, included
Cost coverage for travel: yes, included
Replacement system (Loaner) provision: not included
Transportation cost coverage: not applicable" CNY
9240098 Re-Installation, BR EZ1 The Re-Installation, BR EZ1 facilitates quick implementation of system back into lab routine by minimizing instrument set-up phase. It covers hardware and software check of instrument and provides user with operator refesher overview. Re-installation includes labor and travel costs. Re-installation performance process is documented on a GMP/GLP-compliant Field Service document. CNY
9239852 Foot bumpers, v2.0 (4) CNY
9019944 Cable, P-axis, wires, 8 ch. , C18 CNY
9238880 Bearings up. & low, BS96 CNY
9238836 BioSprint96, Basic Agreement, no PM "Repair service delivery: onsite
Service response time (repair): 5 business days
Periodic inspection/maintenance: not included
Inspection/maintenance delivery: not applicable
Cost coverage for Repair Parts : yes, full coverage
Cost coverage for labor: yes, full coverage
Cost coverage for travel: yes, full coverage
Replacement system (Loaner) provision: not applicable
Transportation cost coverage: not applicable" CNY
9241211 Full Agreement Depot Repair, DML2000, 1y "The Full Agreement Depot Repair, DML2000 provides full service coverage for the DML 2000 luminometer. The service is conducted as an instrument exchange service.
All shipping, labor and repair part costs related to an instrument exchange are included for 1 year. Instrument exchange time is 2 - 3 working days." CNY
9241191 Magnet, tool, QX CNY 【人5核苷酸酶(5-NT)ELISA試劑盒廠家】
9238825 Spare bucket for plate rotor CNY
9238815 Rect. carrier for 12 tubes 10 ml w/ cap CNY
9019472 TAPE SPACER CLEAR GS CNY
9019464 UV tube, Cxx CNY
9243650 Comprehen Valid., EZ1/QIAcube/QIAsymph """The Comprehensive Validation Support plan specific to a laboratory's needs will incorporate all of the requirements for the internal validation guidelines from the FBI's Quality Assurance Standards (QAS).
The Comprehensive Validation Support service includes all travel and labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, and amplify the validation study samples and may require multiple individuals. Usually, two weeks is required to analyze the data and one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.
Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform and complete all extractions, quantifications, amplfications, and capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation.
Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation. Non-QIAGEN chemistry and accessories are not included and should be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) and required substrates (swabs, materials, etc). The Customer is expected to have all materials on-hand 1 week prior to the validation start date.
Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) and STR (amp) analysis and linkage to starting samples.
Validation data CD/flashdrive – QIAGEN will review the validation data and draft a validation summary document, ensuring compliance with the FBI's QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review and signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.
Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation and generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager and the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """ CNY
9237333 Install, BR plus 3 integr. w. scheduling Installation and training, BioRobot System including three approved integration devices with scheduling CNY
9237328 Upgrade, BR & 2 ext. devices w. sched. Upgrade BioRobot with two approved integration devices using scheduling software CNY
9237173 Shield, V-housing CNY
9233208 Tubing, liquid system 2.5/1.5 CNY
9237155 V-Housing with Sample Needle CNY
QY-x1076 人肺腺癌細胞(胸膜滲出液)Calu-3
QY-x1077 人肺癌細胞系(未分化)Calu-6
QY-x1078 人胚肺二倍體細胞HLF-02
QY-x1079 人肺癌細胞系Tul-1 【人5核苷酸酶(5-NT)ELISA試劑盒廠家】
QY-x1080 人胚肺成纖維細胞HFL-I
QY-x1081 人胚肺細胞MRC-5
2QY-x1082 人胚肺細胞WI-38
QY-x1083 人SV-40轉化肺成纖維細胞 WI-38AV13
QY-x1084 人肺癌亞歷山大細胞系PLC/PRF/5
QY-x1085 人肺巨細胞癌(PG)的低轉移亞系PG-LH7
QY-x1086 人肺巨細胞癌(PG)的高轉移亞系PG-BE1
QY-x1087 人肺腺癌細胞系PG49
QY-x1088 人肺腺癌細胞GLC-82
QY-x1089 人肺巨細胞癌細胞HLAmP
QY-x1090 人肺腺癌細胞(轉染TK基因的GLC-82細胞)GLC-82-TK
QY-x1091 人胚肺成纖維細胞突變癌細胞Z-HL16C
QY-x1092 人肺動脈內皮細胞HPAEC
QY-x1093 人肺泡上皮細胞HPAEpiC
QY-x1094 人胚肺成纖維細胞CCC-HPF-1
QY-x1095 人低分化肺腺癌細胞SK-LU-1 【人5核苷酸酶(5-NT)ELISA試劑盒廠家】
QY-x1096 人肺鱗癌細胞LTEP-s
QY-x1097 人小細胞肺癌細胞LTEP-sm
QY-x1098 人小細胞肺癌細胞LTEP-P
QY-x1099 人肺癌細胞973
QY-x1100 人胚肺成纖維細胞 HELF
QY-x1101 人低轉移肺癌細胞95-C
QY-x1102 人高轉移肺癌細胞95-D
QY-x1103 人肺腺癌細胞A2
QY-x1104 人支氣管上皮細胞HBE
QY-x1105 人支氣管上皮細胞16HBE
QY-x1106 人腎癌細胞Ketr-3