產品展示
人血管緊張肽酶A(ATA)ELISA試劑盒現貨
點擊次數:19發布時間:2016/8/16 23:25:47

更新日期:2016/8/16 23:25:47
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
齊一生物銷售:021-6034 8496;181214 53965;173021 04490
1。我必須運行所有的標準和樣品的重復?
是的,重復的運行,以監測測定的精度和提高檢測結果的信心。
2。我必須在一次運行所有的樣品嗎?
不,每個試劑盒采用stripwell微孔板。這允許用戶在不同的時間來分析不同數量的樣品。
3。什么類型的可重復性的結果,得到與分析?
每一個工具都有一個包含一個典型數據的圖表的手冊。在運營商的任何變化,移液和洗滌技術,培養時間、溫度、試劑盒的年齡可以引起變化的結果。每個用戶都應該得到自己的標準曲線。
4。是否有可能儲存的試劑比表示?
在不推薦使用條件下的部件組件的存儲,以保證測試的正確性能。
5。我應該如何儲存我的樣品?
樣品應保存在-20°C或更低的溫度。長期儲存,建議凍結他們在- 70余。
6。我可以修改協議嗎?
BG的ELISA試劑盒進行了優化,提供*佳的結果。修改的格式或協議可能會給出錯誤的結果。
7。我可以使用一個不建議在試劑盒插入的樣本類型嗎?
該試劑盒已被驗證在試劑盒插入的樣品類型。未經檢驗的樣品類型。為進一步信息的聯系技術服務。
8。我的樣本產生的值,在動態范圍內的測定。我可以使用這些值嗎?
建議只有在標準曲線的范圍內下降的樣本值。標準曲線的范圍內的值一般是非線性的,這可能導致不正確的外推值。產生值高于標準的樣品應為(進一步)稀釋和重復。如果樣品低于該測定的范圍內,該樣品被認為是不可檢測的。
9。我每次都要運行一個空白或零標準嗎?
是的,這些都是必需的計算,并反映任何微妙但顯著的性能變化,從一天到一天,檢測到檢測。當排除特定的檢測問題的來源時,它們也非常有幫助。
10。我能改變我在檢測中使用的樣本量嗎?
不建議你改變卷由于BG工具被設計為*佳的性能在給定的體積
11?梢允褂貌煌慕M件組件嗎?
每一個組件包含有特定批號的組件,以確保所有的組件都進行優化,以及與組件中的所有其他組件。對這些特定的地段進行質量檢驗。這是從來沒有建議使用你自己的組件或組件從其他包或供應商。
12。我的標準曲線看起來很好,但我沒有得到一個信號,我的樣本,當我預期,為什么?
樣品不包含被分析物。一個矩陣的效果可能是掩蓋檢測。確保推薦的稀釋液在試劑盒插入后按規定進行。如果建議稀釋,請檢查是否正確進行稀釋。過稀釋會導致樣品在標準曲線的范圍內下降。
13。你怎么推薦我洗盤子?
如果您使用的是一個自動平板洗衣機,我們建議定期檢查校準,并將該系統在洗滌前沖洗緩沖液沖洗。手動洗衣機也是一樣的。一個中繼器或洗瓶也可以使用。用戶應小心,以確保所有的內容都是送氣和板拍干的無塵紙。【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】
14。我需要用一個盤子嗎?
可靠的結果可以得到無板振動,但外徑的一般會低于那些使用平板振動器。
15。為什么我要用波長校正450-570nm之間?
對于酶聯免疫吸附試驗,在雙波長讀的是做正確的光密度貢獻的塑料以及,燈和光學波動。
16。如果我提我的樣本,我還需要遵循推薦的稀釋液試劑盒中插入了嗎?
提取過程中所需的樣本稀釋量將受到影響的純化和濃度的影響的協議使用。稀釋或濃縮的金額將由*終用戶決定。
17。什么是預期的分析物濃度,我應該找到?
一個給定的分析物的量可能會有所不同,不僅從物種的物種,但也組織和細胞來源。這個信息的*佳來源是目前的文獻,很容易通過互聯網在多個科學數據庫訪問。
18。我的光密度有點高(或較低),比那些在手冊中,與我的試劑盒來了。為什么?
光學密度受影響
1. Do I have to run all of my standards and samples in duplicate?
Yes, the duplicates are run in order to monitor assay precision and increase confidence in the assay results obtained.
2. Do I have to run all of my samples at one time?
No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.
3. What types of reproducible results are obtained with the assays?
Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
4. Is it possible to store the reagents other than indicated?
Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.
5. How should I store my samples?
Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.
6. Can I modify the protocol?
BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate and wrong results.
7. Can I use a sample type that is not recommended in the kit insert?
The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.
8. My samples generated values that were outside the dynamic range of the assay. Can I use these values?
It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted and the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】
9. Do I have to run a Blank or Zero Standards every time?
Yes, these are required for the calculations, and reflect any subtle but significant performance changes from day to day and assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.
10. Can I alter the volume of sample I use in the assay?
It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes
11. Can components from different kits be used?
Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.
12. My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?
The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.
13. How do you recommend I wash my plate?
If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, and that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated and the plate tapped dry on lint-free paper.
14. Do I need to use a plate shaker?
Reliable results can be obtained without a plate shaker, but the O.D.'s will generally be lower than those obtained using a plate shaker.
15. Why do I have to use wavelength correction between 450-570nm?
For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp and optical fluctuations. 【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】
16. If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?
The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification and concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.
17. What is the expected concentration of analyte that I should expect to find?
The amount of a given analyte may vary not only from species-to-species, but also between tissue and cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.
18. My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?
The optical density is affected by a number of physical conditions such as time and temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.
19. What are the reasons for High Background?
1) Improper Washing: Check volume of washing buffer reservoir and make sure all recommended washing steps are performed.
2) Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】
3) Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.
4) Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times and temperatures. However, if all wells are intensely and equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.
9019565 Clamp, cable 2 wires 2 tabs, Cxx CNY
9019543 Bow spring, table rail, Cxx CNY
9019510 CHAMBER MAIN VAC STATION 1820 CNY
9019505 PLATE SEPARATOR 48 WELL HIGH CNY
204256 QuantiFast Probe PCR Kit (2000) CNY
204174 Rotor-Gene SYBR Green RT-PCR Kit (400) The Rotor-Gene SYBR Green RT-PCR Kit is dedicated for use with the Rotor-Gene Q cycler, providing ultrafast, highly specific quantification in real-time one-step RT-PCR using SYBR Green I. CNY
204154 QuantiFast SYBR Green RT-PCR Kit (400) CNY
9019424 Wiring, lower heater, RG3 CNY
9019417 Fan, lid, RG3 CNY
9019393 Solenoid, cooling with flap, RG3 CNY
9019386 Photo Multiplier Tube with cable, RG3 CNY
9019368 Damper, lid, RG6 CNY 【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】
9019347 Motor, 12VDC Heater fan, RG6 CNY
9234697 Manual Hardware Plato 7 CNY
9020477 Gasket, front plate, GSC CNY
9234463 Coupling, CPC, inline, female, 8mm CNY
1027285 AllStars Neg. siRNA AF 546 (5 nmol) CNY
1022564 Mm/Hs_MAPK1 control siRNA (5 nmol) CNY
9019205 Opto - Stacker, PyroQ96MD CNY
9019204 Opto - Robot Z motor , PyroQ96MD CNY
9019200 Hinge kit - Top cover, PyroQ96MD CNY
1022073 Luciferase GL3 siRNA (5 nm) CNY
1022064 GFP-22 siRNA (5 nm) CNY
1018996 PCR Buffer, 10 x (22ml/30),KG CNY
1064605 MagAttract M48 DNA Manual Kit (200) CNY
1066851 PG FMDV RT-PCR Assay (48) LE Z CNY
1061054 HBV PCR REAGENT I CNY
1061069 UU PCR REAGENT II CNY 【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】
1061079 NG PCR REAGENT II CNY
9019886 Lid, label 4CH, RG3 CNY
9019875 Cover, main, silver, RGQ CNY
9019836 IPC Hard Drive PCA6751, PyroQ96ID CNY
9019769 Valve, shutoff, V2, QX CNY
QY-AC062 小鼠白血病細胞 L1210 L1210
QY-AC063 大鼠主動脈平滑肌細胞 A7r5 A7r5
QY-AC064 大鼠肝細胞瘤細胞 H-4-II-E H-4-II-E
QY-AC065 小鼠結腸細胞 CT26 CT26
QY-AC067 小鼠骨髓瘤細胞 SP2/0-S SP2/0-S
QY-AC069 小鼠胰島內皮細胞 MS1 MS1
QY-AC070 小鼠骨髓瘤細胞 NS-1P3/NSI/1-Ag4-1 NS-1P3/NSI/1-Ag4-1
QY-AC071 小鼠逆轉錄病毒包裝株 PT-67 PT-67
QY-AC072 小鼠肺上皮細胞 TC-1 TC-1
QY-AC073 大鼠腎上腺嗜鉻細胞瘤細胞高分化 PC-12Well-differentiated PC-12Well-differentiated
QY-AC074 大鼠腎上腺嗜鉻細胞瘤細胞未分化 PC-12Undifferentiated PC-12Undifferentiated
QY-AC075 小鼠腎小球系膜細胞 SV40-MES-13 SV40-MES-13
QY-AC076 小鼠Lewis肺癌細胞 LLC LLC
QY-AC077 中國倉鼠卵巢懸浮細胞biohermes CHO-S CHO-S
QY-AC078 中國倉鼠卵巢細胞invitrogen CHO-S CHO-S 【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】
QY-AC079 倉鼠卵巢細胞,二氫葉酸還原酶缺陷 CHO/dhFr- CHO/dhFr-
QY-AC080 小鼠淋巴瘤細胞 L5178Y TK+/- clone 3.7.2C L5178YTK+/-clone3.7.2C
QY-AC081 小鼠乳腺癌高轉移細胞 MA-891 MA-891
QY-AC082 小鼠宮頸癌細胞 U14 U14
QY-AC083 小鼠胰島素瘤胰島β細胞 Beta-TC-6 Beta-TC-6
QY-AC084 小鼠睪丸間質細胞 TM3 TM3
QY-AC085 猴腎細胞 Marc145 Marc145CRL-12231
QY-AC086 小鼠白血病細胞 P388 P388
QY-AC087 大鼠成骨細胞 ROS1728 ROS1728
QY-AC088 非洲綠猴SV40轉化的腎細胞 COS-7 COS-7
QY-AC089 小鼠胚胎細胞 NIH/3T3 NIH/3T3
QY-AC090 小鼠黑色素瘤細胞 B16F1 B16F1
QY-AC091 大鼠腎細胞 NRK-52E NRK-52E
QY-AC093 鼠肝星形細胞 CFSC-8B CFSC-8B
QY-AC094 鼠肝星形細胞 CFSC-2G CFSC-2G
QY-AC095 人/鼠雜交骨髓瘤細胞 K6H6/B5 K6H6/B5 【人血管緊張肽酶A(ATA)ELISA試劑盒現貨】