產品展示
人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家
點擊次數:12發布時間:2016/8/15 23:01:12

更新日期:2016/8/15 23:01:12
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
|
價格詳細資料:試劑盒價格電議,齊一生物銷售:021-6034 8496;181214 53965;173021 04490,齊一生物科技(上海)有限公司提供ELISA試劑盒受到了廣大研究所.中科院科研單位一致肯定和認同。齊一生物大品牌保證,傾力為國內外科研院校實驗室提供*優質產品。
【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】注意事項
1. 當混合蛋白溶液時應盡量輕緩,避免起泡。
2. 洗滌過程非常重要,不充分的洗滌易造成假陽性。
3. 一次加樣時間控制在5分鐘內,如標本數量多,推薦使用排槍加樣。
4. 請每次測定的同時做標準曲線,做復孔。
5. 如標本中待測物質含量過高,請先稀釋后再測定,計算時請*后乘以稀釋倍數。
6. 在配制標準品、檢測溶液工作液時,請以相應的稀釋液配制,不能混淆。
7. 底物請避光保存。
8. 不要用其它生產廠家的試劑替換試劑盒中的試劑。
FOR RESEARCH USE ONLY
Drug Names
Generic Name:
This kit can be used for determination of serum, plasma and liquid samples Organization Content.
The experimental principle:
The product levels were measured in samples of the kit by double antibody sandwichmethod. The product with the purified antibody coated microtiter plate, made of solid phase antibody, to package is the product antigen monoclonal antibodies are then added to the micropores, the product and then with HRP labeled antibody binding, the formation of antibody - antigen - antibody complex enzyme label, after thorough washing with TMB chromogenic substrate. TMB in the HRP enzyme catalytic conversion into the blue, and in the action of acid into the final yellow. This product is positively related to the depth of color and in the samples. Instrument measured absorbance in the 450nm wavelength with ELISA (OD), the product concentration in the samples was calculated by standard curve.
Materials provided with the kit
Materials provided with the kit 96 determinations Storage
User manual 1
Closure plate membrane 2
Sealed bags 1
Microelisa stripplate 1 2-8℃
Standard:360ng/L 0.5ml×1 bottle 2-8℃
Standard diluent 1.5ml×1 bottle 2-8℃
HRP-Conjugate reagent 6ml×1 bottle 2-8℃
Sample diluent 6ml×1 bottle 2-8℃
Chromogen Solution A 6ml×1 bottle 2-8℃
Chromogen Solution B 6ml×1 bottle 2-8℃
Stop Solution 6ml×1 bottle 2-8℃
wash solution (20ml×30 fold)
×1bottle 2-8℃
Specimen requirements
1. serum- coagulation at room temperature 10-20 mins,centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again. 【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】
2. plasma-use suited EDTA or citrate plasma as an anticoagulant,mix 10-20 mins ,centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again.
3. Urine-collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again. The Operation of Hydrothorax and cerebrospinal fluid Reference to it.
4. cell culture supernatant-detect secretory components, collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant,detect the composition of cells, Dilut cell suspension with PBS(PH7.2-7.4), Cell concentration reached 1 million / ml, repeated freeze-thaw cycles, damage cells and release of intracellular components, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again.
5. Tissue samples- After cutting samples, check the weight,add PBS(PH7.2-7.4), Rapidly frozen with liquid nitrogen, maintain samples at 2-8℃ after melting,add PBS(PH7.4), Homogenized by hand or Grinders, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant.
6. extract as soon as possible after Specimen collection,and according to the relevant literature, and should be experiment as soon as possible after the extraction. If it can’t, specimen can be kept in -20 ℃ to preserve, Avoid repeated freeze-thaw cycles.
7. Can’t detect the sample which contain NaN3, because NaN3 inhibits HRP active.
Assay procedure
1.Dilute and add sample to Standard: set 10 Standard wells on the ELISA plates coated, add Standard 100μl to the first and the second well, then add Standard dilution 50μl to the first and the second well, mix; take out 100μl form the first and the second well then add it to the third and the forth well separately. then add Standard dilution 50μl to the third and the forth well ,mix ; then take out 50μl from the third and the forth well discard, add 50μl to the fifth and the sixth well ,then add Standard dilution 50μl to the fifth and the sixth well, mix ; take out 50μl from the fifth and the sixth well and add to the seventh and the eighth well, then add Standard dilution 50μl to the seventh and the eighth well ,mix ; take out 50μl from the seventh and the eighth well and add to the ninth and the tenth well, add Standard dilution 50μl to the ninth and the tenth well, mix , take out 50μl from the ninth and the tenth well discard(add Sample 50μl to each well after Diluting ,(density: 240ng/L,160ng/L ,80ng/L,40ng/L, 20ng/L)
2.add sample:Set blank wells separately (blank comparison wells .don’t add sample and HRP-Conjugate reagent, other each step operation is same). testing sample well. add Sample dilution 40μl to testing sample well, then add testing sample 10μl (sample final dilution is 5-fold), add sample to wells , don’t touch the well wall as far as possible, and Gently mix. 【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】
3.Incubate: After closing plate with Closure plate membrane ,incubate for 30 min at 37℃.
4.Configurate liquid: 30-fold (or 20-fold)wash solution diluted 30-fold (or 20-fold) with distilled water and reserve.
5.washing:Uncover Closure plate membrane, discard Liquid, dry by swing, add washing buffer to every well, still for 30s then drain, repeat 5 times, dry by pat.
6.add enzyme:Add HRP-Conjugate reagent 50μl to each well, except blank well.
7.incubate:Operation with 3.
8.washing:Operation with 5.
9.color:Add Chromogen Solution A 50ul and Chromogen Solution B to each well, evade the light preservation for 15 min at 37℃
10.Stop the reaction:Add Stop Solution50μl to each well, Stop the reaction(the blue color change to yellow color).
11.assay:take blank well as zero , Read absorbance at 450nm after Adding Stop Solution and within 15min.
Important notes
1. The kit takes out from the refrigeration environment should be balanced 15-30 minutes in the room temperature, ELISA plates coated if has not use up after opened, the plate should be stored in Sealed bag.
2. washing buffer will Crystallization separation, it can be heated the water helps dissolve when dilute . Washing does not affect the result.
3. add Sample with sampler Each step, And proofread its accuracy frequently, avoids the experimental error. add sample within 5 mins, if the number of sample is much , recommend to use Volley . 【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】
4. if the testing material content is excessively higher (The sample OD is bigger than the first standard well ),please dilute Sample (n-fold), Please diluente and multiplied by the dilution factor.(×n×5).
5. Closure plate membrane only limits the disposable use, to avoid cross-contamination.
6. The substrate evade the light preservation.
7. Please according to use instruction strictly, The test result determination must take the microtiter plate reader as a standard.
8. All samples, washing buffer and each kind of reject should according to infective material process.
9. Do not mix reagents with those from other lots.
Calculate:
Take the standard density as the horizontal, the OD value for the vertical ,draw the standard curve on graph paper, Find out the corresponding density according to the sample OD value by the Sample curve, multiplied by the dilution multiple, or calculate the straight line regression equation of the standard curve with the standard density and the OD value ,with the sample OD value in the equation, calculate the sample density, multiplied by the dilution factor, the result is the sample actual density.
|
Storage and validity
1.Storage: 2-8℃.
2.validity: six months.
QY-18872 Anti-TRA16 (Testicular orphan nuclear receptor-4 (TR4)-associated protein)睪丸激素受體相關蛋白16抗體
QY-18882 Anti-TRA16 (Testicular orphan nuclear receptor-4 (TR4)-associated protein)睪丸激素受體相關蛋白/孤兒素受體相關蛋白抗體
QY-18892 Anti-TRADD (TNF receptor 1 associated via death domain)有死亡區的腫瘤壞死因子受體1相關蛋白抗體
QY-18902 Anti-TRAF1 (TNF receptor-associated factor 1)腫瘤壞死因子受體相關因子1抗體
QY-18912 Anti-TRAF2 (TNF receptor-associated factor 2)腫瘤壞死因子受體相關因子2抗體
QY-18922 Anti-TRAF3/CD40bp (CD40 binding protein)CD40結合蛋白/CD40受體相關因子1抗體
QY-18932 Anti-TRAF6 (TNF receptor-associated factor 6)腫瘤壞死因子受體相關因子6抗體
QY-18942 Anti-TRAIL/Apo2L (tumor necrosis factor-related apoptosis-inducingligand)腫瘤壞死因子相關凋亡誘導配體/凋亡素2配體抗體 【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】
QY-18952 Anti-Transthyretin (TTR/prealbumin)轉甲狀腺素蛋白抗體
QY-18962 Anti-TRBF1 (Telomeric repeat binding factor 1)端粒體復制結合因子1抗體
QY-18972 Anti-TRF1(telomere repeat binding factor1)端粒結合蛋白1抗體
QY-18982 Anti-TrK A (Tyrosine kinase,TrkA)酪氨酸激酶A抗體(神經生長因子受體的一種)
QY-18992 Anti-TrK A.B.C(Tyrosine kinase,TrkA.B.C)酪氨酸激酶A.B.C抗體
QY-19002 Anti-Trk B(Tyrosine kinase,Pyk2)酪氨酸激酶B抗體(神經生長因子受體的一種)
QY-19012 Anti-Trk B(Tyrosine kinase,TrkB)酪氨酸激酶B抗體(神經生長因子受體的一種)
QY-19022 Anti-Trk C(Tyrosine kinase,TrkC)酪氨酸激酶C抗體(神經生長因子受體的一種)
QY-19032 Anti-Trop-2Trop-2抗體
QY-19042 Anti-TSARG3(Testis and spermatogenesis related gene 3)生精細胞凋亡相關基因3抗體
QY-19052 Anti-TSARG4(Testis and spermatogenesis related gene 4)生精細胞凋亡相關基因4抗體
QY-19062 Anti-TSGF(Tumor Specific Growth Fanctor)惡性腫瘤特異性生長因子抗體
QY-19072 Anti-TSH(Mouse Anti-Human Thyroid stimulating hormone Monoclonal Antibody)鼠抗人促甲狀腺素單克隆抗體
QY-19082 Anti-TSHR (Thyroid stimulating hormone receptor)促甲狀腺素受體抗體
QY-19092 Anti-TSHR (Thyroid stimulating hormone receptor)(CT)促甲狀腺素受體抗體(C端)
QY-19102 Anti-TSHR (Thyroid stimulating hormone receptor)(NT)促甲狀腺素受體抗體(N端) 【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】
QY-19112 Anti-TSLC1 (tumor suppressor in lung cancer-1)肺癌腫瘤阻抑基因1抗體
QY-19122 Anti-TSLP(Thymic stromal lymphopoietin isoform 1)淋巴細胞生成素-1抗體
QY-19132 Anti-TTF-1 (Thyroid Transcription Factor-1)甲狀腺核轉錄因子-1/甲狀腺特異增強子結合蛋白抗體
QY-19142 Anti-TTF-2(thyroid transcription factor 2;forkhead box E1)甲狀腺轉錄因子-2抗體
QY-19152 Anti-Tubulin-α微管蛋白抗體
QY-19162 Anti-Tubulin-β微管蛋白(免疫組化用抗體)
QY-19172 Anti-Tubulin-β微管蛋白抗體
QY-19182 Anti-Tubulin-γ微管蛋白-γ抗體
QY-19192 Anti-TY3H/TH (Tyrosine Hydroxylase )酪氨酸羥化酶抗體
970530 NRAS Pyro Kit (24) CNY
970022 PyroMark Q24 CpG MLH1 (4 x 24) For quantification of methylation level in region -209 to -188 from the transcription start site. CNY
969261 Ni-NTA Superflow 96 BioRobot Kit (4) CNY
133199 NeXtalStock HEPES pH 8.0 (200) CNY
292143 mericon Horse Kit (24) CNY
206047 Type-it Fast SNP Probe PCR Kit (4000) "Features
Outstanding separation for reliably high call rates
For difficult SNP loci and for low amounts of template
Validated using TaqMan SNP Genotyping Assays
Up to 40% time savings due to fast-cycling procedure
Convenient master mix format and optimized protocol" CNY
292025 mericon Cattle (96) CNY
291113 mericon RR Soy Kit (24) CNY
9001908 QIAgility HEPA / UV (w/o PC) System QIAgility HEPA / UV (w/o PC) System combines the QIAgility instrument and installation. The Installation plus Introductory Training is an on-site service, conducted by a QIAGEN Service Specialist. It provides the user with training on operation and user maintenance. All travel and labor cost included for Installation. Performance of the installation process is documented on a GMP/GLP-compliant Field Service document. CNY
133111 NeXtalStock Sodium fluoride (200) CNY
9018540 Kit, installation, Qsym CNY
9240672 Kerk Nut, Common, AP CNY
9240658 Pump, Vacuum, Jun-Air, AP CNY
9240642 Cable Assy, Proteinase K Pump, AP196/98 CNY
9240638 Opto Sensor, Reagent Pump, AP CNY 【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】
9240617 Fuse, 2.0A, FNM, AP96 CNY
9240589 MAC Valve, 4-Way, Cent. Locator, AP96 CNY
9240560 Rotor/Buckets, Eppendorf, AP196/98 CNY
9240554 Bucket Grease, Eppendorf, AP196/98 CNY
9240523 Cable, Motor, Axis #0, Dispense, AP98 CNY
9240507 Software & Std. Protocols, AP196 CNY
9240377 QIAcube, Installation The Installation, QIAcube facilitates the quick implementation of the QIACube into the lab routine by minimizing the instrument start-up phase. It covers the hardware and software installation of the QIAcube instrument and provides the user with an introductory training on operation and user maintenance. The installation includes labor and travel costs. The performance of the installation process is documented on a GMP/GLP-compliant Field Service document. CNY
9239571 BR Universal, Basic Agreement The Basic Cover Agreement BR Universal provides full service coverage for the BioRobot Universal System. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days. CNY
9239570 BR Universal, Premium Agreement The Premium Cover Agreement BR Universal provides full service coverage for the BioRobot Universal System. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Full Agreement, there is a priority response time of 24 hours (1 working day). CNY
9020032 FOOTSET, RGQ CNY
9019986 PCB, small breakout, 12 core, C12 CNY
9019479 UPPER BUFFER LID GS CNY
9238864 BR M48, Premium Agreement The Premium Cover Agreement M48 provides full service coverage for the BioRobot M48. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Full Agreement, there is a priority response time of 24 hours (1 working day). CNY
9238852 LiquiChip, Basic Agreement The Basic Cover Agreement LiquiChip provides full service coverage for the LiquiChip workstation. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days. CNY
9241224 QIAxcel, Inspection Service "Repair service delivery not applicable
Service response time (repair) not applicable
Periodic inspection/maintenance: yes, 1/agreement year
Cost coverage for Repair Parts : not included
Cost coverage for labor: yes, full coverage
Cost coverage for travel: not included
Replacement system (Loaner) provision: not applicable
Transportation cost coverage: Yes, included" CNY
9241197 Silicone sealant, RTV 108, QX CNY 【人T細胞特異性鳥苷三磷酸酶(Tgtp)ELISA試劑盒廠家】