產品展示
人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家
點擊次數:5發布時間:2016/8/11 13:32:38

更新日期:2016/8/11 13:32:38
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
齊一生物銷售:021-6034 8496;181214 53965;173021 04490
1。我必須運行所有的標準和樣品的重復?
是的,重復的運行,以監測測定的精度和提高檢測結果的信心。
2。我必須在一次運行所有的樣品嗎?
不,每個試劑盒采用stripwell微孔板。這允許用戶在不同的時間來分析不同數量的樣品。
3。什么類型的可重復性的結果,得到與分析?
每一個工具都有一個包含一個典型數據的圖表的手冊。在運營商的任何變化,移液和洗滌技術,培養時間、溫度、試劑盒的年齡可以引起變化的結果。每個用戶都應該得到自己的標準曲線。
4。是否有可能儲存的試劑比表示?
在不推薦使用條件下的部件組件的存儲,以保證測試的正確性能。
5。我應該如何儲存我的樣品?
樣品應保存在-20°C或更低的溫度。長期儲存,建議凍結他們在- 70余。
6。我可以修改協議嗎?
BG的ELISA試劑盒進行了優化,提供*佳的結果。修改的格式或協議可能會給出錯誤的結果。
7。我可以使用一個不建議在試劑盒插入的樣本類型嗎?
該試劑盒已被驗證在試劑盒插入的樣品類型。未經檢驗的樣品類型。為進一步信息的聯系技術服務。
8。我的樣本產生的值,在動態范圍內的測定。我可以使用這些值嗎?
建議只有在標準曲線的范圍內下降的樣本值。標準曲線的范圍內的值一般是非線性的,這可能導致不正確的外推值。產生值高于標準的樣品應為(進一步)稀釋和重復。如果樣品低于該測定的范圍內,該樣品被認為是不可檢測的。
9。我每次都要運行一個空白或零標準嗎?
是的,這些都是必需的計算,并反映任何微妙但顯著的性能變化,從一天到一天,檢測到檢測。當排除特定的檢測問題的來源時,它們也非常有幫助。
10。我能改變我在檢測中使用的樣本量嗎?
不建議你改變卷由于BG工具被設計為*佳的性能在給定的體積
11?梢允褂貌煌慕M件組件嗎?
每一個組件包含有特定批號的組件,以確保所有的組件都進行優化,以及與組件中的所有其他組件。對這些特定的地段進行質量檢驗。這是從來沒有建議使用你自己的組件或組件從其他包或供應商。
12。我的標準曲線看起來很好,但我沒有得到一個信號,我的樣本,當我預期,為什么?
樣品不包含被分析物。一個矩陣的效果可能是掩蓋檢測。確保推薦的稀釋液在試劑盒插入后按規定進行。如果建議稀釋,請檢查是否正確進行稀釋。過稀釋會導致樣品在標準曲線的范圍內下降。
13。你怎么推薦我洗盤子?
如果您使用的是一個自動平板洗衣機,我們建議定期檢查校準,并將該系統在洗滌前沖洗緩沖液沖洗。手動洗衣機也是一樣的。一個中繼器或洗瓶也可以使用。用戶應小心,以確保所有的內容都是送氣和板拍干的無塵紙。【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
14。我需要用一個盤子嗎?
可靠的結果可以得到無板振動,但外徑的一般會低于那些使用平板振動器。
15。為什么我要用波長校正450-570nm之間?
對于酶聯免疫吸附試驗,在雙波長讀的是做正確的光密度貢獻的塑料以及,燈和光學波動。
16。如果我提我的樣本,我還需要遵循推薦的稀釋液試劑盒中插入了嗎?
提取過程中所需的樣本稀釋量將受到影響的純化和濃度的影響的協議使用。稀釋或濃縮的金額將由*終用戶決定。
17。什么是預期的分析物濃度,我應該找到?
一個給定的分析物的量可能會有所不同,不僅從物種的物種,但也組織和細胞來源。這個信息的*佳來源是目前的文獻,很容易通過互聯網在多個科學數據庫訪問。
18。我的光密度有點高(或較低),比那些在手冊中,與我的試劑盒來了。為什么?
光學密度受影響
1. Do I have to run all of my standards and samples in duplicate?
Yes, the duplicates are run in order to monitor assay precision and increase confidence in the assay results obtained.
2. Do I have to run all of my samples at one time?
No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.
3. What types of reproducible results are obtained with the assays?
Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
4. Is it possible to store the reagents other than indicated?
Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.
5. How should I store my samples?
Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.
6. Can I modify the protocol?
BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate and wrong results.
7. Can I use a sample type that is not recommended in the kit insert?
The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.
8. My samples generated values that were outside the dynamic range of the assay. Can I use these values?
It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted and the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
9. Do I have to run a Blank or Zero Standards every time?
Yes, these are required for the calculations, and reflect any subtle but significant performance changes from day to day and assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.
10. Can I alter the volume of sample I use in the assay?
It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes
11. Can components from different kits be used?
Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.
12. My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?
The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.
13. How do you recommend I wash my plate?
If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, and that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated and the plate tapped dry on lint-free paper.
14. Do I need to use a plate shaker?
Reliable results can be obtained without a plate shaker, but the O.D.'s will generally be lower than those obtained using a plate shaker.
15. Why do I have to use wavelength correction between 450-570nm?
For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp and optical fluctuations. 【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
16. If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?
The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification and concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.
17. What is the expected concentration of analyte that I should expect to find?
The amount of a given analyte may vary not only from species-to-species, but also between tissue and cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.
18. My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?
The optical density is affected by a number of physical conditions such as time and temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.
19. What are the reasons for High Background?
1) Improper Washing: Check volume of washing buffer reservoir and make sure all recommended washing steps are performed.
2) Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
3) Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.
4) Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times and temperatures. However, if all wells are intensely and equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.
9240761 CPU, AP96 CNY
9240757 Downtube, 500 ml Bottle, AP96/196 CNY
9242768 Belt, x-drive, portal, SP, Qsym CNY
9242715 Validation Support, 5d, EZ1 QThe QIAGEN EZ1 Accelerated Validation Support service includes all travel and labor charges for a site visit up to 5 days by a QIAGEN Specialist. A QIAGEN specialist will provide an introduction to the EZ1 system and the DNA Investigator silica chemistry utilized in the process, review the Handbook and User Manual, as well as hands-on user support and EZ1 unit operation. The Accelerated Validation service includes guidance on the laboratory’s validation experimental design, internal validation documentation support, and QIAGEN sponsored data templates. The QIAGEN Specialist will support the customer by running samples through the QIAGEN extraction method/system, as well as general wet lab support such as pipetting for quantification, STR and CE setup, normalization, etc. to produce the data needed for the validation study. The customer is responsible for submitting the data to QIAGEN for assisted data analysis. The customer is responsible for final documentation and report using QIAGEN prepared templates provided with the final product. Enough consumable chemistry and accessories (QIAGEN or other vendors) should be purchased by the customer to cover the validation experimental design and are not included in the cost of validation support. Attendees will receive a certificate of participation in the hands-on exercises. CNY
5000-1314 Rotary Shaker - Bar Roller (Pair) CNY
5000-1305 Switch Power, SKR1 CNY
5000-1281 DML 2000 - Power Cord 220V B Type (DE) CNY
5025-1015 Expand 4 Pipettor Stand CNY
6000-3118 Plate Washer I - Wash Cap Assembly CNY
6000-1203 96 Well Plate CNY
5000-1418 Control Digene PCB, VTX2 CNY
5140-1220 hc2 GC-ID DNA Test CNY
5050-1076 V.1 HYBRID CAPTURE SYSTEM CNY
EA10324 EASYartus CMV RG PCR Kit 2 CNY 【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
EA10223 EASYartus VZV RG_I CNY
9240718 Tool, Calibration Weight, 20g, AP CNY
L2126 hc2 HPV DNA Test PI (CD-ROM) CNY
9240702 O-RIng, Shaker, Main Body, AP96/196 CNY
9240697 Adaptor, Waste Drain, AP CNY
9243665 RGQ MDx, Full Agreement "Repair service delivery send to Regional Repair Center
Service response time (repair) 7-10 days turnaround time
Periodic inspection/maintenance: yes, 1/agreement year
Inspection/maintenance delivery: onsite
Cost coverage for Repair Parts : yes, full coverage
Cost coverage for labor: yes, full coverage
Cost coverage for travel: not included
Replacement system (Loaner) provision: yes, included (provision time 2-3 days)
Transportation cost coverage: yes, full coverage""" CNY
19597 Investigator Lyse&Spin Basket Kit (50) CNY
9021726 Roof Top, QSYSP CNY
1051561 Attractene Transfection Reagent (0,1 ml) CNY
273005 pigtype Salmonella Ab (20) CNY
280435 virotype BTV RT-PCR Kit (96) CNY
970452 PyroMark Q24 SNP KRAS v2.0 (4 x 24) For detection of mutations in codon 12, codon 13 and codon 61.optimized for FFPE material CNY
9010802 Z-bar, 1.02 CNY
932636 #QIAsymphony Ni-NTA Native Kit (384) CNY
800329 Plasmid Prep, Large Scale CNY
800374 Dry Ice Surcharge CNY 【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
9019894 ZLVPiston, Single-channel pipet, CAS1200 CNY
9020225 ZLV Belt, X-axis assembly, C3x CNY
9020589 Opto Assembly, DML 3000 CNY
QY-x1265 人T細胞白血病細胞6T-CEM
QY-x1266 人T細胞白血病細胞HuT 78
QY-x1267 人T細胞白血病細胞A3
QY-x1268 人單核細胞白血病細胞THP-1
QY-x1269 人肥大細胞白血病細胞CHMAS
QY-x1270 人巨核細胞保白血病細胞Dami
QY-x1271 人巨細胞白血病細胞株Mo7e
QY-x1272 人成巨核細胞白血病細胞MEG-01
QY-x1273 急性T細胞白血病細胞)Jurkat
QY-x1274 人T淋巴瘤轉基因細胞Jurkat D,E 【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
QY-x1275 人T淋巴瘤細胞Jurkat亞系Jurkat77
QY-x1276 人外周血嗜堿性白細胞KU812
QY-x1277 人原髓細胞白血病細胞AL7P/HL-60R
QY-x1278 人急性成髓細胞白血病Kasumi-1
QY-x1279 人T細胞白血病細胞T-CEM
QY-x1280 人EB病毒轉化的B細胞CGM1
QY-x1281 人血液白血病細胞TF-1
QY-x1282 人分泌A2抗體B淋巴細胞BB7.2
QY-x1283 人血管平滑肌 T/G
QY-x1284 急性T淋巴細胞白血病細胞TALL-104
QY-x1285 人淋巴細胞瘤細胞JK(Jurkat)
QY-x1286 人T淋巴瘤細胞系Hut-102
QY-x1287 人Burkitt`s淋巴瘤細胞Raji
QY-x1288 人B細胞淋巴瘤細胞系BJAB
QY-x1289 人Burkitts淋巴瘤細胞系CA46
QY-x1290 血細胞瘤細胞系Ramos 【人抗麻疹病毒抗體(MVAb)ELISA試劑盒廠家】
QY-x1291 人B淋巴細胞瘤細胞RAMOS(RA.1)
QY-x1292 人Burkitt`s淋巴瘤細胞 NAMALWA
QY-x1293 分泌A2抗體B淋巴細胞BB7.2
QY-x1294 轉HLA-2基因B細胞T2
QY-x1295 人EBV陽性B淋巴瘤細胞P3HR1