產品展示
雞白介素5(IL-5)ELISA試劑盒廠家
點擊次數:34發布時間:2016/8/1 21:24:06

更新日期:2016/8/2 16:42:16
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
|
價格詳細資料:試劑盒價格電議,齊一生物銷售:021-6034 8496;181214 53965;173021 04490,齊一生物科技(上海)有限公司提供ELISA試劑盒受到了廣大研究所.中科院科研單位一致肯定和認同。齊一生物大品牌保證,傾力為國內外科研院校實驗室提供*優質產品。
【雞白介素5(IL-5)ELISA試劑盒廠家】注意事項
1. 當混合蛋白溶液時應盡量輕緩,避免起泡。
2. 洗滌過程非常重要,不充分的洗滌易造成假陽性。
3. 一次加樣時間控制在5分鐘內,如標本數量多,推薦使用排槍加樣。
4. 請每次測定的同時做標準曲線,做復孔。
5. 如標本中待測物質含量過高,請先稀釋后再測定,計算時請*后乘以稀釋倍數。
6. 在配制標準品、檢測溶液工作液時,請以相應的稀釋液配制,不能混淆。
7. 底物請避光保存。
8. 不要用其它生產廠家的試劑替換試劑盒中的試劑。
FOR RESEARCH USE ONLY
Drug Names
Generic Name:
This kit can be used for determination of serum, plasma and liquid samples Organization Content.
The experimental principle:
The product levels were measured in samples of the kit by double antibody sandwichmethod. The product with the purified antibody coated microtiter plate, made of solid phase antibody, to package is the product antigen monoclonal antibodies are then added to the micropores, the product and then with HRP labeled antibody binding, the formation of antibody - antigen - antibody complex enzyme label, after thorough washing with TMB chromogenic substrate. TMB in the HRP enzyme catalytic conversion into the blue, and in the action of acid into the final yellow. This product is positively related to the depth of color and in the samples. Instrument measured absorbance in the 450nm wavelength with ELISA (OD), the product concentration in the samples was calculated by standard curve.
Materials provided with the kit
Materials provided with the kit 96 determinations Storage
User manual 1
Closure plate membrane 2
Sealed bags 1
Microelisa stripplate 1 2-8℃
Standard:360ng/L 0.5ml×1 bottle 2-8℃
Standard diluent 1.5ml×1 bottle 2-8℃
HRP-Conjugate reagent 6ml×1 bottle 2-8℃
Sample diluent 6ml×1 bottle 2-8℃
Chromogen Solution A 6ml×1 bottle 2-8℃
Chromogen Solution B 6ml×1 bottle 2-8℃
Stop Solution 6ml×1 bottle 2-8℃
wash solution (20ml×30 fold)
×1bottle 2-8℃
Specimen requirements
1. serum- coagulation at room temperature 10-20 mins,centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again. 【雞白介素5(IL-5)ELISA試劑盒廠家】
2. plasma-use suited EDTA or citrate plasma as an anticoagulant,mix 10-20 mins ,centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again.
3. Urine-collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again. The Operation of Hydrothorax and cerebrospinal fluid Reference to it.
4. cell culture supernatant-detect secretory components, collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant,detect the composition of cells, Dilut cell suspension with PBS(PH7.2-7.4), Cell concentration reached 1 million / ml, repeated freeze-thaw cycles, damage cells and release of intracellular components, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation appeared, Centrifugal again.
5. Tissue samples- After cutting samples, check the weight,add PBS(PH7.2-7.4), Rapidly frozen with liquid nitrogen, maintain samples at 2-8℃ after melting,add PBS(PH7.4), Homogenized by hand or Grinders, centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant.
6. extract as soon as possible after Specimen collection,and according to the relevant literature, and should be experiment as soon as possible after the extraction. If it can’t, specimen can be kept in -20 ℃ to preserve, Avoid repeated freeze-thaw cycles.
7. Can’t detect the sample which contain NaN3, because NaN3 inhibits HRP active.
Assay procedure
1.Dilute and add sample to Standard: set 10 Standard wells on the ELISA plates coated, add Standard 100μl to the first and the second well, then add Standard dilution 50μl to the first and the second well, mix; take out 100μl form the first and the second well then add it to the third and the forth well separately. then add Standard dilution 50μl to the third and the forth well ,mix ; then take out 50μl from the third and the forth well discard, add 50μl to the fifth and the sixth well ,then add Standard dilution 50μl to the fifth and the sixth well, mix ; take out 50μl from the fifth and the sixth well and add to the seventh and the eighth well, then add Standard dilution 50μl to the seventh and the eighth well ,mix ; take out 50μl from the seventh and the eighth well and add to the ninth and the tenth well, add Standard dilution 50μl to the ninth and the tenth well, mix , take out 50μl from the ninth and the tenth well discard(add Sample 50μl to each well after Diluting ,(density: 240ng/L,160ng/L ,80ng/L,40ng/L, 20ng/L)
2.add sample:Set blank wells separately (blank comparison wells .don’t add sample and HRP-Conjugate reagent, other each step operation is same). testing sample well. add Sample dilution 40μl to testing sample well, then add testing sample 10μl (sample final dilution is 5-fold), add sample to wells , don’t touch the well wall as far as possible, and Gently mix. 【雞白介素5(IL-5)ELISA試劑盒廠家】
3.Incubate: After closing plate with Closure plate membrane ,incubate for 30 min at 37℃.
4.Configurate liquid: 30-fold (or 20-fold)wash solution diluted 30-fold (or 20-fold) with distilled water and reserve.
5.washing:Uncover Closure plate membrane, discard Liquid, dry by swing, add washing buffer to every well, still for 30s then drain, repeat 5 times, dry by pat.
6.add enzyme:Add HRP-Conjugate reagent 50μl to each well, except blank well.
7.incubate:Operation with 3.
8.washing:Operation with 5.
9.color:Add Chromogen Solution A 50ul and Chromogen Solution B to each well, evade the light preservation for 15 min at 37℃
10.Stop the reaction:Add Stop Solution50μl to each well, Stop the reaction(the blue color change to yellow color).
11.assay:take blank well as zero , Read absorbance at 450nm after Adding Stop Solution and within 15min.
Important notes
1. The kit takes out from the refrigeration environment should be balanced 15-30 minutes in the room temperature, ELISA plates coated if has not use up after opened, the plate should be stored in Sealed bag.
2. washing buffer will Crystallization separation, it can be heated the water helps dissolve when dilute . Washing does not affect the result.
3. add Sample with sampler Each step, And proofread its accuracy frequently, avoids the experimental error. add sample within 5 mins, if the number of sample is much , recommend to use Volley . 【雞白介素5(IL-5)ELISA試劑盒廠家】
4. if the testing material content is excessively higher (The sample OD is bigger than the first standard well ),please dilute Sample (n-fold), Please diluente and multiplied by the dilution factor.(×n×5).
5. Closure plate membrane only limits the disposable use, to avoid cross-contamination.
6. The substrate evade the light preservation.
7. Please according to use instruction strictly, The test result determination must take the microtiter plate reader as a standard.
8. All samples, washing buffer and each kind of reject should according to infective material process.
9. Do not mix reagents with those from other lots.
Calculate:
Take the standard density as the horizontal, the OD value for the vertical ,draw the standard curve on graph paper, Find out the corresponding density according to the sample OD value by the Sample curve, multiplied by the dilution multiple, or calculate the straight line regression equation of the standard curve with the standard density and the OD value ,with the sample OD value in the equation, calculate the sample density, multiplied by the dilution factor, the result is the sample actual density.
|
Storage and validity
1.Storage: 2-8℃.
2.validity: six months.
5123-1220 Female Swab Specimen Collection KitTM CNY
5100-1400IVD hc2 Sample Conversion Kit CNY
EA11424 EASYartus BKV RG_II CNY
5050-1075 V.1 CD Rom Manual, MST Vortexer 2 CNY
EA10124 EASYartus EBV RG PCR Kit 2 CNY
BR-02 DxS B-RAF Mutation Test Kit CNY
9240729 Tubing, 3/8"OD , Red, AP CNY
9240719 Cable Carrier, Capper, Elevator, AP CNY
9240701 O-Ring, Shaker, Lower Body, AP96/196 CNY
9240696 Fitting, Barbed, 1/4" ID tube, AP CNY
9243651 Comprehen Valid., QIAgility """The Comprehensive Validation Support plan specific to a laboratory's needs will incorporate all of the requirements for the internal validation guidelines from the FBI's Quality Assurance Standards (QAS).
The Comprehensive Validation Support service includes all travel and labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, and amplify the validation study samples and may require multiple individuals. Usually, two weeks is required to analyze the data and one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.
Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform and complete all extractions, quantifications, amplfications, and capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation.
Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation. Non-QIAGEN chemistry and accessories are not included and should be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) and required substrates (swabs, materials, etc). For planning purposes and to ensure a smooth process, the Customer is expected to have all materials on-hand and inventoried one (1) week prior to the validation start date.
Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) and STR (amp) analysis and linkage to starting samples.
Validation data CD/flashdrive – QIAGEN will review the validation data and draft a validation summary document, ensuring compliance with the FBI's QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review and signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.
Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation and generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager and the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """ CNY
218076 miScript SYBR Green PCR Kit (2000) CNY
271906 cattletype Milk Prep Kit (50) CNY
289980 intype IC-DNA (1ml) CNY 【雞白介素5(IL-5)ELISA試劑盒廠家】
280437 virotype BTV RT-PCR Kit (480) CNY
932836 #QIAsymphony Ni-NTA Denat. Kit (384) CNY
800511 Verification Sequencing / DNA production CNY
9238243 ZLV BioRobot M96 User Manual CNY
9019988 ZLV Mainboard, QGY CNY
9020553 Foam angle, transport box, QIAC CNY
9020582 X-Motor, DML3000 CNY
9020584 Y-Belt, DML3000 320 Teeth CNY
9020594 Enclosure, DML3000 CNY
9021006 Motor, Pipettor Y, DCU CNY
9236333 Sample Loop CNY
9013382 Shaker adapter, microplate, LHS CNY
9013275 Motor, gripper, handler T/L, BR3000 CNY
9013269 Fitting, PA tubing M6x1, 2.25mm, (10) CNY
9013210 Cabling kit, moving, BR8000 CNY
9013198 Tubing,pres.sen.con.auto vac,BR8000v1.00 CNY 【雞白介素5(IL-5)ELISA試劑盒廠家】
9013188 Valve set, pressure relaese, dispenser, CNY
QY-x2434 人肝癌細胞 Hep 3B2.1-7 詢價 ATCC 【雞白介素5(IL-5)ELISA試劑盒廠家】
QY-x2435 人宮頸癌細胞 Hela 詢價 ATCC
QY-x2436 大鼠心肌細胞 H9c2(2-1) 詢價 ATCC
QY-x2437 人乳腺細胞 HBL-100 詢價 ATCC
QY-x2438 人T淋巴細胞系 H9 詢價 ATCC
QY-x2439 小鼠淋巴瘤細胞 EL-4 詢價 ATCC
QY-x2440 人前列腺癌細胞 DU 145 詢價 ATCC
QY-x2441 人成巨核細胞白血病細胞 Daudi 詢價 ATCC
QY-x2442 非洲綠猴SV40轉化的腎細胞 COS-7 詢價 ATCC
QY-x2443 人結腸腺癌細胞 COLO 320 詢價 ATCC
QY-x2444 人鼻咽癌細胞 CNE 詢價 ATCC
QY-x2445 人肺腺癌 (胸水) Calu-3 詢價 ATCC
QY-x2446 人急性淋巴細胞白血病T淋巴細胞 CCRF-CEM 詢價 ATCC
QY-x2447 人腎透明細胞癌皮膚轉移細胞 Caki-1 詢價 ATCC
QY-x2448 Burkitts淋巴癌細胞系 CA46 詢價 ATCC
QY-x2449 人宮頸癌腸轉移細胞 Ca Ski 詢價 ATCC
QY-x2450 大鼠膠質瘤細胞 C6 詢價 ATCC 【雞白介素5(IL-5)ELISA試劑盒廠家】
QY-x2451 人乳腺管癌細胞 BT-549 詢價 ATCC
QY-x2452 倉鼠幼倉鼠腎細胞 BHK-21 [C-13] 詢價 ATCC
QY-x2453 人肝癌細胞 BEL-7402 詢價 ATCC
QY-x2454 小鼠黑色素瘤細胞 B16 詢價 ATCC
QY-x2455 人轉移胰腺腺癌細胞 AsPC-1 詢價 ATCC
QY-x2456 人胚腎細胞 AAV-293 詢價 ATCC
QY-x2457 人肺癌細胞 A549 [A-549] 詢價 ATCC
QY-x2458 人表皮癌細胞 A-431 詢價 ATCC
QY-x2459 人T淋巴細胞白血病細胞 A3 詢價 ATCC
QY-x2460 人高轉移肺癌細胞 95-D 詢價 ATCC
QY-x2461 人腎透明細胞腺癌細胞 786-O 詢價 ATCC
QY-x2462 小鼠脂肪細胞 3T3-L1 詢價 ATCC
QY-x2463 人胚腎細胞 293T 詢價 ATCC