產品展示
QGY-7703肝癌
點擊次數:23發布時間:2016/6/28 20:17:49

更新日期:2016/6/28 20:17:49
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
【QGY-7703肝癌】下面是細胞株培養的具體無菌技術要點:
1. 實驗開始前,無菌室和無菌操作臺需要紫外光照射30到60分鐘完全滅菌,用70%ethanol擦拭無菌操作臺面,并且打開無菌操作臺風扇運行10分鐘之后,才可以進行實驗操作。每次操作只能處理一株細胞株,即使培養基完全相同也不可共用培養基,以避免細胞間污染或失誤混淆。實驗完成后,請將實驗物品拿出工作臺,用70%ethanol再次擦拭無菌操作臺面。操作間隔應該讓無菌操作臺運轉10分鐘到15分鐘后,才能進行下一個細胞株的操作。
2. 無菌操作工作的區域應保持清潔和寬敞,必要物品(試管架、吸管、吸取器或吸管盒等)可以暫時放置,其它實驗用品使用完畢后應移出,有利于空氣流通。實驗用品需70%ethanol擦拭后方可帶入無菌操作臺內。實驗操作過程應在臺面的中央無菌區域內完成,請勿在邊緣非無菌區域進行操作。
3. 小心取用無菌實驗物品,避免細菌污染。請勿觸碰吸管尖頭部和容器瓶口處,也不要在打開的容器正上方進行操作。容器打開后,請用手夾住瓶蓋并輕握瓶身,傾斜大約45°角取用,盡量不要將瓶蓋口朝上放置于桌面。
4. 工作人員應當首先注意自身安全,必須穿戴齊實驗衣和實驗手套后才能進行實驗。對于病毒感染或是來自人類的細胞株應當特別小心操作,并選擇適當?shù)燃?jí)的無菌操作臺進行(至少是Class II)。操作過程中,應避免引起aerosol的產生,小心有毒性藥品,例如DMSO和TPA等,并避免針頭的傷害等等。
5. 定期檢測下列項目:
5.1. CO2鋼瓶的CO2壓力
5.2. CO2培養箱的CO2濃度、溫度、和水盤是否有污染(水盤的水需用無菌水,每周定時更換)。
5.3. 無菌操作臺內的airflow壓力,定期更換紫外線燈管和HEPA過濾膜,預濾網(300小時/預濾網,3000小時/HEPA)。
6. 水槽內可添加消毒劑(Zephrin 1:750),需定期更換水槽中的水。
【QGY-7703肝癌】齊一生物友情提醒,本產品僅供科研使用,不得用于臨床及診斷使用!
一細胞說明,具體詳細請見細胞附帶說明書
二、客戶自備試劑
1、PBS
2、 2、RPMI-1640 培養基(不含 Hepes)+ 10%胎牛血清+ 1%雙抗
3、0.25% (W/V)胰蛋白酶(含 0.02% EDTA)
三、細胞背景
1、生長方式:貼壁
2、種屬:Homo sapiens 人
四、培養條件
1、培養基:RPMI-1640 培養基(不含 Hepes)+ 10%胎牛血清+ 1%雙抗
2、溫度:37.0°C
3、氣體:空氣 95%,CO2 5%
【QGY-7703肝癌】五、培養方法
收到細胞后,在倒置顯微鏡下觀察整個細胞生長情況:
如果細胞未長滿,用 75%酒精噴灑整個瓶消毒后放到超菌臺內,嚴格無菌操作,打開細胞培養瓶,留10ml 培養液繼續培養。如果細胞已長滿(達 80-90%)。即可進行傳代,具六、體步驟如下:
1,棄去培養液,用PBS洗 1-2次。
2,向瓶?jī)?nèi)加入 1.0-2.0ml 胰蛋白酶液,在倒置顯微鏡下觀察細胞消化情況,若細胞大部分變圓,迅速拿回操作臺,吸取胰蛋白酶,加含有 6ml 含 10%血清的培養液,輕輕吹打細胞。
3,加入等量的的培養液,輕輕吹打混勻后吸出一半,分到新的培養
4,傳代比例:1:2-1:3
七、常見問題及解決方案
1、培養瓶有破裂,培養液有漏液:細胞極大可能會污染,所以我們會及時安排幫老師解決。
2、細胞漂。号囵B(yǎng)瓶不開封,瓶口酒精擦拭后平躺放置在培養箱。次日觀察,如細胞大部分又貼回瓶底,表明細胞活力正常,剩余漂浮的細胞可以去掉,留 10ml 培養液培養觀察,細胞生長至匯合度 80%,進行消化傳代;如細胞還是不貼壁,將細胞離心收集轉到新培養瓶,原培養瓶加部分培養液繼續培養,中間注意觀察,我們的技術人員會一直跟蹤指導,直到問題解決。
細胞培養代理品牌
細胞培養代理品牌
| GIBCO 作為細胞培養的金字招牌,是在此領域的領導者,現在是Invitrogen的一部分。Gibco可以提供*為廣泛的品種以滿足用戶不同的需求,每一種產品都通過*為嚴格的品質管理。同時,Gibco也可按客戶的要求對培養基的配方進行改動,或完全按客戶的配方進行生產。 |
【QGY-7703肝癌】齊一生物科技(上海)有限公司是一家專業生產和銷售各種生化試劑,細胞株、原代細胞、菌種、醫藥中間體,標準品和對照品的大型化學科技公司. 齊一生物銷售:021-6034 8496;181214 53965;173021 04490;Web:www.qiyibio.com
800090Ready-Run Rxns.CNY
765312PAXgene TissueFIX Cont. (50 ml) KitCNY
132009EasyXtal 15-Well Tool X-Seal (100)"100 empty 15-well crystallization plates with X-Seal crystallization supports (5 boxes of 20)
For manual setup of hanging drop crystallization experiments."CNY
762931Buffer BM3 Wash buffer 8 x 150 ml conc.CNY
204054QuantiFast SYBR Green PCR Kit (400)CNY
203741QIAGEN Fast Cycling PCR Kit (50)"Trial Kit: For 50 x 20 µl reactions: 1 x 0.5 ml Fast Cycling Master Mix (2x), RNase-free water, 10 x CoralLoad Fast Cycling Dye, 5 x Q-Solution
-to be used as sample Kit"CNY
159340Sterile Foam-Tipped Swabs (100)CNY
158906Cell Lysis Solution (125 ml)CNY
35061Ni-NTA HisSorb Plates (5)5 Ni-NTA-coated, transparent 96-well platesCNY
678891ipsogen MLL-DUP e2e8 StandardsCNY
678591ipsogen MLL-AF9 e8e10 StandardsCNY
678191ipsogen MLL-AF4 e10e4 StandardsCNY
34460Penta.His HRP Conjugate Kit125 ul Penta-His HRP Conjugate, 5 g Blocking Reagent, 50 ml Blocking Reagent Buffer (10x concentrate)CNY
32746EasyXpress Linear Template Fab Kit (100)CNY
32501EasyXpress Protein Synthesis Kit (5)"- Kit for cell-free protein expression in E.coli cell-free extracts.
- The same as the EasyXpress Protein Synthesis Kit (20) (former EasyXpress Protein Synthesis Mini Kit), but only 5 instead of 20 reactions
- Ideal for testing and expression of QIAgenes"CNY
30900Glutathione HiCap Matrix (10 ml)CNY
28181QIAquick 96 PCR Purification Kit (4)For purification of 4 x 96 PCR reactions: 4 QIAquick 96 Plates, Buffers, Collection Microtubes (1.2 ml), CapsCNY
9011595Tip adapter, 300 µl, 120 mm, v2.04CNY
9011565Shaker, 4-plate for Plato 7CNY
9013185Tubing, waste, DispenseCNY
9013174Connector, tubing, 1-8, BR8000CNY
9013169Tubing, syringe inlet 1, BR8000CNY
9011433BGR Z-Motor P1300 Spez. MWGCNY
9011422Tip Rack Holder, RCS1CNY
9243119Green Laser Contr. Coherent 115M-13, LCCNY
9243556HC2, Full Agreement"Service response time (on-site repair):not applicable
Periodic inspection/maintenance: yes, 1/agreement year
Cost coverage depot repair (parts, labor, packaging, shipping): yes, full coverage
For defect DML, after customer calling QIAGEN technical service hotline before 12 am:
- A special package containing a replacement unit shall be sent to the customer within 2 working days.
- Customer shall send the defect unit to QIAGEN Regional Repair Center following the instructions attached with the packaging.
For DML owned by customer, QIAGEN Regional Repair Center will send back the repaired original unit to customers within 7-10 working days.
PC, Monitor, Heater, Shaker, Washer, Printer and Votexer:
- A new unit shall be sent to customer within 7-10 working days at no extra cost
- Customer shall send the defect unit to QIAGEN for disposal
- On-site installation of PC and application software is not covered by the agreement
The Preventive Maintenance (PM) service ensures the correct operation of the equipment. During the PM, all the instrument modules are inspected by a qualified QIAGEN service technician. The Preventive Maintenance is performed under the manufacturer guidelines and documented according to GLP / GMP"CNY
101.901-24#HLA-DQB1*0602; DQA1*0102 incl.Taq (24)CNY
9241033#Tube insert, 11 mm, sample carrCNY
9242760#Warranty PLUS 1, Prem/RRL, 1PM,QSYM RGQCNY
677491ipsogen NPM1 mut A gDNA MutaQuant StdsCNY