【乳腺上皮細胞培養基】下面是細胞株培養的具體無菌技術要點：

1. 實驗開始前，無菌室和無菌操作臺需要紫外光照射30到60分鐘完全滅菌，用70%ethanol擦拭無菌操作臺面，并且打開無菌操作臺風扇運行10分鐘之后，才可以進行實驗操作。每次操作只能處理一株細胞株，即使培養基完全相同也不可共用培養基，以避免細胞間污染或失誤混淆。實驗完成后，請將實驗物品拿出工作臺，用70%ethanol再次擦拭無菌操作臺面。操作間隔應該讓無菌操作臺運轉10分鐘到15分鐘后，才能進行下一個細胞株的操作。

2. 無菌操作工作的區域應保持清潔和寬敞，必要物品（試管架、吸管、吸取器或吸管盒等）可以暫時放置，其它實驗用品使用完畢后應移出，有利于空氣流通。實驗用品需70%ethanol擦拭后方可帶入無菌操作臺內。實驗操作過程應在臺面的中央無菌區域內完成，請勿在邊緣非無菌區域進行操作。

3. 小心取用無菌實驗物品，避免細菌污染。請勿觸碰吸管尖頭部和容器瓶口處，也不要在打開的容器正上方進行操作。容器打開后，請用手夾住瓶蓋并輕握瓶身，傾斜大約45°角取用，盡量不要將瓶蓋口朝上放置于桌面。

4. 工作人員應當首先注意自身安全，必須穿戴齊實驗衣和實驗手套后才能進行實驗。對于病毒感染或是來自人類的細胞株應當特別小心操作，并選擇適當?shù)燃?jí)的無菌操作臺進行（至少是Class II）。操作過程中，應避免引起aerosol的產生，小心有毒性藥品，例如DMSO和TPA等，并避免針頭的傷害等等。

5. 定期檢測下列項目：

5.1. CO2鋼瓶的CO2壓力

5.2. CO2培養箱的CO2濃度、溫度、和水盤是否有污染（水盤的水需用無菌水，每周定時更換）。

5.3. 無菌操作臺內的airflow壓力，定期更換紫外線燈管和HEPA過濾膜，預濾網（300小時/預濾網，3000小時/HEPA）。

6. 水槽內可添加消毒劑（Zephrin 1:750），需定期更換水槽中的水。

【乳腺上皮細胞培養基】齊一生物友情提醒，本產品僅供科研使用，不得用于臨床及診斷使用！

一細胞說明，具體詳細請見細胞附帶說明書

 二、客戶自備試劑

1、PBS  

2、 2、RPMI-1640 培養基（不含 Hepes）+ 10%胎牛血清+ 1%雙抗

3、0.25%  （W/V）胰蛋白酶（含 0.02% EDTA）

三、細胞背景

1、生長方式：貼壁

2、種屬：Homo sapiens  人

四、培養條件

1、培養基：RPMI-1640 培養基（不含 Hepes）+ 10%胎牛血清+ 1%雙抗

2、溫度：37.0°C

3、氣體:空氣  95%，CO2 5%

【乳腺上皮細胞培養基】五、培養方法

 收到細胞后，在倒置顯微鏡下觀察整個細胞生長情況：

 如果細胞未長滿，用 75%酒精噴灑整個瓶消毒后放到超菌臺內，嚴格無菌操作，打開細胞培養瓶，留10ml 培養液繼續培養。如果細胞已長滿（達 80-90%）。即可進行傳代，具六、體步驟如下：

1，棄去培養液，用PBS洗 1-2次。

2，向瓶?jī)?nèi)加入 1.0-2.0ml 胰蛋白酶液，在倒置顯微鏡下觀察細胞消化情況，若細胞大部分變圓，迅速拿回操作臺，吸取胰蛋白酶，加含有 6ml  含 10%血清的培養液，輕輕吹打細胞。

3，加入等量的的培養液，輕輕吹打混勻后吸出一半，分到新的培養

4，傳代比例：1:2-1:3  

七、常見問題及解決方案

1、培養瓶有破裂，培養液有漏液：細胞極大可能會污染，所以我們會及時安排幫老師解決。

2、細胞漂�。号囵B(yǎng)瓶不開封，瓶口酒精擦拭后平躺放置在培養箱。次日觀察，如細胞大部分又貼回瓶底，表明細胞活力正常，剩余漂浮的細胞可以去掉，留 10ml 培養液培養觀察，細胞生長至匯合度 80%，進行消化傳代；如細胞還是不貼壁，將細胞離心收集轉到新培養瓶，原培養瓶加部分培養液繼續培養，中間注意觀察，我們的技術人員會一直跟蹤指導，直到問題解決。

細胞培養代理品牌

細胞培養代理品牌

【乳腺上皮細胞培養基】齊一生物科技（上海）有限公司是一家專業生產和銷售各種生化試劑,細胞株、原代細胞、菌種、醫藥中間體,標準品和對照品的大型化學科技公司. 齊一生物銷售：021－6034 8496；181214 53965；173021 04490；Web:www.qiyibio.com

5000-1430MST Vortexer II - FoamFeetAssembly, 110VCNY

5128-1220Specimen Transport Medium (STM) CECNY

5123-1220Female Swab Specimen Collection KitTMCNY

5100-1400IVDhc2 Sample Conversion KitCNY

EA11424EASYartus BKV RG_IICNY

5050-1075 V.1CD Rom Manual, MST Vortexer 2CNY

EA10124EASYartus EBV RG PCR Kit 2CNY

BR-02DxS B-RAF Mutation Test KitCNY

9240729Tubing, 3/8"OD , Red, APCNY

9240719Cable Carrier, Capper, Elevator, APCNY

9240701O-Ring, Shaker, Lower Body, AP96/196CNY

9240696Fitting, Barbed, 1/4" ID tube, APCNY

9243651Comprehen Valid., QIAgility"""The Comprehensive Validation Support plan specific to a laboratory＇s needs will incorporate all of the requirements for the internal validation guidelines from the FBI＇s Quality Assurance Standards (QAS).

The Comprehensive Validation Support service includes all travel ａnd labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, ａnd amplify the validation study samples ａnd may require multiple individuals. Usually, two weeks is required to analyze the data ａnd one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.

Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform ａnd complete all extractions, quantifications, amplfications, ａnd capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation. 

Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation.  Non-QIAGEN chemistry ａnd accessories are not included ａnd should  be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) ａnd required substrates (swabs, materials, etc).   For planning purposes ａnd to ensure a smooth process, the Customer is expected to have all materials on-hand ａnd inventoried one (1) week prior to the validation start date.

Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) ａnd STR (amp) analysis ａnd linkage to starting samples.

Validation data CD/flashdrive – QIAGEN will review the validation data ａnd draft a validation summary document, ensuring compliance with the FBI＇s QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review ａnd signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.

Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation ａnd generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager ａnd the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """CNY

218076miScript SYBR Green PCR Kit (2000)CNY

271906cattletype Milk Prep Kit (50)CNY

289980intype IC-DNA (1ml)CNY

280437virotype BTV RT-PCR Kit (480)CNY

932836#QIAsymphony Ni-NTA Denat. Kit (384)CNY

800511Verification Sequencing / DNA productionCNY

9238243ZLV BioRobot M96 User ManualCNY

9019988ZLV Mainboard, QGYCNY

9020553Foam angle, transport box, QIACCNY

9020582X-Motor, DML3000CNY

9020584Y-Belt, DML3000 320 TeethCNY

9020594Enclosure, DML3000CNY

9021006Motor, Pipettor Y, DCUCNY

9236333Sample LoopCNY

9013382Shaker adapter, microplate, LHSCNY

9013275Motor, gripper, handler T/L, BR3000CNY

9013269Fitting, PA tubing M6x1, 2.25mm, (10)CNY

9013210Cabling kit, moving, BR8000CNY