檢測標本：血清,血漿,尿液,胸腹水,腦脊液,細胞培養上清,組織勻漿等

檢測方法：ELISA

檢測類型：酶聯免疫夾心法

產品的用途：僅供科研究課題使用

價格及詳細資料：齊一生物銷售：021－6034 8496；181214 53965；173021 04490；.齊一生物科技（上海）有限公司提供的ELISA試劑盒受到了廣大科研單位的一致肯定和認同.大品牌保證,價格公道,傾力為國內外科研院校實驗室提供*優質的產品.若有需要,我司將竭誠為您服務！本試劑盒用于測定血清,血漿及相關液體樣本中含量.

【人抗α-胞襯蛋白抗體IgGIgA（α-FodrinIgGIgA）ELISA試劑盒】實驗原理：

   本試劑盒應用雙抗體夾心法測定標本中該產品水平.用純化的本產品抗體包被微孔板,制成固相抗體,往包被單抗的微孔中依次加入本產品抗原,再與HRP標記的本產品抗體結合,形成抗體-抗原-酶標抗體復合物,經過徹底洗滌后加底物TMB顯色.TMB在HRP酶的催化下轉化成藍色,并在酸的作用下轉化成*終的黃色.顏色的深淺和樣品中的本產品呈正相關.用酶標儀在450nm波長下測定吸光度（OD值）,通過標準曲線計算樣品中該產品濃度.

試劑盒組成：

齊一生物銷售：021－6034 8496；181214 53965；173021 04490

【人抗α-胞襯蛋白抗體IgGIgA（α-FodrinIgGIgA）ELISA試劑盒】標本要求：

1．標本采集后盡早進行提取,提取按相關文獻進行,提取后應盡快進行實驗.若不能馬上進行試驗,可將標本放于-20℃保存,但應避免反復凍融

2．不能檢測含NaN3的樣品,因NaN3抑制辣根過氧化物酶的（HRP）活性.

操作步驟：

1.     標準品的稀釋與加樣：在酶標包被板上設標準品孔10孔,在、第二孔中分別加標準品100μl,然后在、第二孔中加標準品稀釋液50μl,混勻；然后從孔、第二孔中各取100μl分別加到第三孔和第四孔,再在第三、第四孔分別加標準品稀釋液50μl,混勻；然后在第三孔和第四孔中先各取50μl棄掉,再各取50μl分別加到第五、第六孔中,再在第五、第六孔中分別加標準品稀釋液50ul,混勻；混勻后從第五、第六孔中各取50μl分別加到第七、第八孔中,再在第七、第八孔中分別加標準品稀釋液50μl,混勻后從第七、第八孔中分別取50μl加到第九、第十孔中,再在第九第十孔分別加標準品稀釋液50μl,混勻后從第九第十孔中各取50μl棄掉.（稀釋后各孔加樣量都為50μl,濃度分別為1200 ng/L,800 ng/L ,400 ng/L,200ng/L, 100 ng/L）. 【人抗α-胞襯蛋白抗體IgGIgA（α-FodrinIgGIgA）ELISA試劑盒】

2.     加樣：分別設空白孔（空白對照孔不加樣品及酶標試劑,其余各步操作相同）、待測樣品孔.在酶標包被板上待測樣品孔中先加樣品稀釋液40μl,然后再加待測樣品10μl（樣品*終稀釋度為5倍）.加樣將樣品加于酶標板孔底部,盡量不觸及孔壁,輕輕晃動混勻.

3.     溫育：用封板膜封板后置37℃溫育30分鐘.

4.     配液：將30（48T的20倍）倍濃縮洗滌液用蒸餾水30（48T的20倍）倍稀釋后備用.

5.     洗滌：小心揭掉封板膜,棄去液體,甩干,每孔加滿洗滌液,靜置30秒后棄去,如此重復5次,拍干.

6.     加酶：每孔加入酶標試劑50μl,空白孔除外.

7.     溫育：操作同3.

8.     洗滌：操作同5.

9.     顯色：每孔先加入顯色劑A50μl,再加入顯色劑B50μl,輕輕震蕩混勻,37℃避光顯色15分鐘.

10. 終止：每孔加終止液50μl,終止反應（此時藍色立轉黃色）.

11. 測定：以空白空調零,450nm波長依序測量各孔的吸光度（OD值）. 測定應在加終止液后15分鐘以內進行.

注意事項：

1． 試劑盒從冷藏環境中取出應在室溫平衡15-30分鐘后方可使用,酶標包被板開封后如未用完,板條應裝入密封袋中保存.

2． 濃洗滌液可能會有結晶析出,稀釋時可在水浴中加溫助溶,洗滌時不影響結果. 【人抗α-胞襯蛋白抗體IgGIgA（α-FodrinIgGIgA）ELISA試劑盒】

3． 各步加樣均應使用加樣器,并經常校對其準確性,以避免試驗誤差.一次加樣時間控制在5分鐘內,如標本數量多,推薦使用排搶加樣.

4． 請每次測定的同時做標準曲線,做復孔.如標本中待測物質含量過高（樣本OD值大于標準品孔孔的OD值）,請先用樣品稀釋液稀釋一定倍數（n倍）后再測定,計算時請*后乘以總稀釋倍數（×n×5）.

5． 封板膜只限一次性使用,以避免交叉污染.

6． 底物請避光保存.

7． 嚴格按照說明書的操作進行,試驗結果判定必須以酶標儀讀數為準.

8． 所有樣品,洗滌液和各種廢棄物都應按傳染物處理.

9． 本試劑不同批號組分不得混用.

10. 如與英文說明書有異,以英文說明書為準.

計算：

以標準物的濃度為橫坐標,OD值為縱坐標,   

在坐標紙上繪出標準曲線,根據樣品的OD     

值由標準曲線查出相應的濃度；再乘以稀釋     

倍數；或用標準物的濃度與OD值計算出標     

準曲線的直線回歸方程式,將樣品的OD值     

代入方程式,計算出樣品濃度,再乘以稀釋

倍數,即為樣品的實際濃度.

試劑盒性能：

1.樣品線性回歸與預期濃度相關系數R值為0.95以上.

2.批內與批見應分別小于9%和11%    

保存條件及有效期：

1.試劑盒保存；2-8℃.

2．有效期：6個月

929529QX Alignment Marker 50 bp/5 kb (1.5 ml)CNY

972824PyroMark Gold Q96 CDT Reagents (6 x 96)For performing pyrosequencing reaction on the Q96 MD in combination with the capillary dispensing tips (CDT)CNY

133222NeXtalStock Sodium ac. pH 4.0 (200)CNY

133219NeXtalStock Sodium ac. H2O (200)CNY

52926QIAamp Viral RNA Mini QIAcube Kit (240)CNY

9012692Source rack (128 pos) for tubes 16 mmCNY

9012665Pipetting system upgrade 1, BR3000CNY

9002022Rotor-Gene Q MDx 5plex PlatformCNY

970012PyroMark Q24 CpG p16 (4 x 24)For quantification of methylation level in  region +148 to +174 in exon 1 of the gene.CNY

133203NeXtalStock Imidazole-HCl pH 8.0 (200)CNY

293013mericon Soy Kit (24)CNY

9001919PyroMark Q96 MD Automated, PriorityPyroMark Q96 MD Automated, Priority includes the PyroMark Q96 MD Automated instrument, installation ａnd extended warranty. Installation covers hardware ａnd software installation of system ａnd provides user with introductory training. Priority package extends warranty period of the system to 2 years. One preventive maintenance visit is included for each year of the warranty; 2 preventive maintenance visits in total. Service package includes all parts, labor ａnd travel costs with a service response time of 48 hours (2 working days). Performance of the installation ａnd service visits are documented on a GMP/GLP-compliant Field Service documents.CNY

133115NeXtalStock Sodium sulfate (200)CNY

965662QIAamp Virus BioRobot 9604 Kit (12)For 12 x 96 nucleic acid preps: 12 QIAamp 96 Plates, RNase-free Buffers, QIAGEN Protease, AirPore Tape Sheets, Tape Pad, S-Blocks, Racks with Collection Microtubes (1.2 ml), Carrier RNA, CapsCNY

9240670Reservoir, 1000ml, AP96/196CNY

9240644External BCR, Metrologic MS9521, APCNY

9240636Power Entry Module, AP196/98CNY

9240616Fuse, 5.0A, FNM, AP96CNY

9240607Fiber Optic Sensor Cable, 5M, AP98CNY

9240590Purge Solenoid, Overflow Jar, AP96/196CNY

9240573Centrifuge RT-7, Sorvall, 115V, AP96CNY

9240551Main PCB, Eppendorf, AP196/98CNY

9240533Motor Assy, SiNug, 23, CapU/D, AP96CNY

9240524Cable, Motor, Axis#1, Capper U\D, AP98CNY

9240347Autopure, Basic Agreement"Repair service delivery: onsite

Service response time (repair): 5 business days

Periodic inspection/maintenance: yes, 1/agreement year

Inspection/maintenance delivery: onsite

Cost coverage for repair parts: yes, included

Cost coverage for labor: yes, included

Cost coverage for travel: yes, included

Replacement system (Loaner) provision: not included

Transportation cost coverage: not applicable"CNY

9240243Brushes, with spring (2), TRCNY

9240097Re-Installation, BRThe Re-Installation, BR facilitates quick implementation of the unit back into lab routine by minimizing  instrument set-up phase. It covers hardware ａnd software check of  instrument ａnd provides user with operator refesher overview.  Re-installation includes labor ａnd travel costs. Re-installation performance process is documented on a GMP/GLP-compliant Field Service document.CNY

9239568Needle, W-Drive, DISU, BR8, v2.0CNY

9239561Assy,Kit,Retrofit,Coherent-intoLX100CNY

9019936Pipetting head, 8 ch. , CAS3800/4800CNY