產品展示
人乳鐵傳遞蛋白乳鐵蛋白抗體IgG(LFLTFAb-Ig)ELISA試劑盒
點擊次數:10發布時間:2016/6/7 20:57:48

更新日期:2016/6/29 8:33:04
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
1.購買我公司任意ELISA試劑盒指標享受免費代測,并提供技術指導服務!
二、實驗材料與試劑配制:
1. 儀器與材料:酶標儀(使用前預熱30分鐘),微量加液器、吸頭、蒸餾水或去離子水,濾紙。
2. 緩沖液使用:加5ul 的緩沖液于50ul 的樣品中,如果樣品量不夠或者不確定,緩沖液和樣品的混合比例不要小于1:10即可混勻,靜置1小時備用(如果標本是血清或者血漿,此步驟忽略)。
3. 洗液的配制:按1:100的比例配制洗液備用。
齊一生物銷售:021-6034 8496;181214 53965;173021 04490
【人乳鐵傳遞蛋白乳鐵蛋白抗體IgG(LFLTFAb-Ig)ELISA試劑盒】三. 仔細閱讀說明書
1.檢查試劑盒標簽上的有效期。如果超過有效期,請勿使用。
2. 按說明書確定所有試劑齊全(數量、體積)
3. 標本制備要規范,每份標本體積要按2-3個復孔以上的量制備(貯存),盡量分裝做備份。
4.短期內無法實驗者,注意低溫保存
5.準備好所有實驗額外所需物品,(比如移液器,試管,清洗器,酶標儀)
6. 按說明書將所用試劑平衡至室溫,根據檢測標本數量確定所需試劑的量
7.檢查試劑盒內每種試劑的貯存條件,保證所有試劑均按照試劑盒內說明書推薦的條件存儲。 【人乳鐵傳遞蛋白乳鐵蛋白抗體IgG(LFLTFAb-Ig)ELISA試劑盒】
8.檢查不穩定或者變質的試劑溶液(比如沉淀或變色)。有些試劑,比如標準品稀釋液或者檢測稀釋液,可能在設計時就含有沉淀物。所有試劑在滴入酶標板之前,必需充分混勻。而由于沉淀物的特性,在加入酶標板之前,必需不停攪拌。
9.保證充分的孵育時間和溫度。
10.切勿使用不同生產批號的試劑取代現有試劑或混合現有試劑。
11.在混合或溶解蛋白溶液時,避免泡沫產生。
12.在實驗開始之前,安排好實驗流程。在實驗開始之前,清潔工作臺。
13.若有問題,應與我公司或代理商的技術支持聯系
【人乳鐵傳遞蛋白乳鐵蛋白抗體IgG(LFLTFAb-Ig)ELISA試劑盒】四、客戶須知
齊一生物銷售:021-6034 8496;181214 53965;173021 04490
1.在收集標本前都必須有一個完整的計劃,必須清楚要檢測的成份是否足夠穩定。我們提倡新鮮標本盡早檢測,對收集后當天就進行檢測的標本,及時儲存在4℃?zhèn)溆,如有特殊原因需要周期收集?biāo)本,請造模取材后,將標本及時分裝后放在-20℃或-70℃條件下保存。因冰室與室溫存在一定溫差,蛋白極易降解,直接影響實驗質量,所以避免反復凍融。部分標本也可加入適當防腐劑,激素類標本需添加抑肽酶。
2.試劑盒代測標本的客戶取材前須向我司銷售人員索要說明書,具體操作注意事項請與我司技術人員溝通。
3.液體類標本:標本必須為液體,不含沉淀。包括血清、血漿、尿液、胸腹水、腦脊液、細胞培養上清、組織勻漿等。
4.購買前請?zhí)崆案嬖V我們:您樣本的種屬、樣本數量、待測指標及其它特殊要求。
【人乳鐵傳遞蛋白乳鐵蛋白抗體IgG(LFLTFAb-Ig)ELISA試劑盒】五、代測數據詳細內容
1、ELISA標準曲線;
2、實驗具體詳細步驟;
3、完整的實驗報告(試劑耗材,實驗方法,實驗結果及結果說明);
4、實驗進行階段,我公司客服人員會及時向您匯報實驗進程。
800090Ready-Run Rxns.CNY
765312PAXgene TissueFIX Cont. (50 ml) KitCNY
132009EasyXtal 15-Well Tool X-Seal (100)"100 empty 15-well crystallization plates with X-Seal crystallization supports (5 boxes of 20)
For manual setup of hanging drop crystallization experiments."CNY
762931Buffer BM3 Wash buffer 8 x 150 ml conc.CNY
204054QuantiFast SYBR Green PCR Kit (400)CNY
203741QIAGEN Fast Cycling PCR Kit (50)"Trial Kit: For 50 x 20 µl reactions: 1 x 0.5 ml Fast Cycling Master Mix (2x), RNase-free water, 10 x CoralLoad Fast Cycling Dye, 5 x Q-Solution
-to be used as sample Kit"CNY
159340Sterile Foam-Tipped Swabs (100)CNY
158906Cell Lysis Solution (125 ml)CNY
35061Ni-NTA HisSorb Plates (5)5 Ni-NTA-coated, transparent 96-well platesCNY
678891ipsogen MLL-DUP e2e8 StandardsCNY
678591ipsogen MLL-AF9 e8e10 StandardsCNY
678191ipsogen MLL-AF4 e10e4 StandardsCNY
34460Penta.His HRP Conjugate Kit125 ul Penta-His HRP Conjugate, 5 g Blocking Reagent, 50 ml Blocking Reagent Buffer (10x concentrate)CNY
32746EasyXpress Linear Template Fab Kit (100)CNY
32501EasyXpress Protein Synthesis Kit (5)"- Kit for cell-free protein expression in E.coli cell-free extracts.
- The same as the EasyXpress Protein Synthesis Kit (20) (former EasyXpress Protein Synthesis Mini Kit), but only 5 instead of 20 reactions
- Ideal for testing and expression of QIAgenes"CNY
30900Glutathione HiCap Matrix (10 ml)CNY
28181QIAquick 96 PCR Purification Kit (4)For purification of 4 x 96 PCR reactions: 4 QIAquick 96 Plates, Buffers, Collection Microtubes (1.2 ml), CapsCNY
9011595Tip adapter, 300 µl, 120 mm, v2.04CNY
9011565Shaker, 4-plate for Plato 7CNY
9013185Tubing, waste, DispenseCNY
9013174Connector, tubing, 1-8, BR8000CNY
9013169Tubing, syringe inlet 1, BR8000CNY
9011433BGR Z-Motor P1300 Spez. MWGCNY
9011422Tip Rack Holder, RCS1CNY
9243119Green Laser Contr. Coherent 115M-13, LCCNY
9243556HC2, Full Agreement"Service response time (on-site repair):not applicable
Periodic inspection/maintenance: yes, 1/agreement year
Cost coverage depot repair (parts, labor, packaging, shipping): yes, full coverage
For defect DML, after customer calling QIAGEN technical service hotline before 12 am:
- A special package containing a replacement unit shall be sent to the customer within 2 working days.
- Customer shall send the defect unit to QIAGEN Regional Repair Center following the instructions attached with the packaging.
For DML owned by customer, QIAGEN Regional Repair Center will send back the repaired original unit to customers within 7-10 working days.
PC, Monitor, Heater, Shaker, Washer, Printer and Votexer:
- A new unit shall be sent to customer within 7-10 working days at no extra cost
- Customer shall send the defect unit to QIAGEN for disposal
- On-site installation of PC and application software is not covered by the agreement
The Preventive Maintenance (PM) service ensures the correct operation of the equipment. During the PM, all the instrument modules are inspected by a qualified QIAGEN service technician. The Preventive Maintenance is performed under the manufacturer guidelines and documented according to GLP / GMP"CNY
101.901-24#HLA-DQB1*0602; DQA1*0102 incl.Taq (24)CNY
9241033#Tube insert, 11 mm, sample carrCNY
9242760#Warranty PLUS 1, Prem/RRL, 1PM,QSYM RGQCNY
677491ipsogen NPM1 mut A gDNA MutaQuant StdsCNY