齊一生物銷售：021－6034 8496；181214 53965；173021 04490

1。我必須運行所有的標準和樣品的重復？

是的，重復的運行，以監測測定的精度和提高檢測結果的信心。

2。我必須在一次運行所有的樣品嗎？

不，每個試劑盒采用stripwell微孔板。這允許用戶在不同的時間來分析不同數量的樣品。

3。什么類型的可重復性的結果，得到與分析？

每一個工具都有一個包含一個典型數據的圖表的手冊。在運營商的任何變化，移液和洗滌技術，培養時間、溫度、試劑盒的年齡可以引起變化的結果。每個用戶都應該得到自己的標準曲線。

4。是否有可能儲存的試劑比表示？

在不推薦使用條件下的部件組件的存儲，以保證測試的正確性能。

5。我應該如何儲存我的樣品？

樣品應保存在-20°C或更低的溫度。長期儲存，建議凍結他們?cè)?/span>- 70余。

6。我可以修改協議嗎？

BG的ELISA試劑盒進行了優化，提供*佳的結果。修改的格式或協議可能會給出錯誤的結果。

7。我可以使用一個不建議在試劑盒插入的樣本類型嗎？

該試劑盒已被驗證在試劑盒插入的樣品類型。未經檢驗的樣品類型。為進一步信息的聯系技術服務。

8。我的樣本產生的值，在動態范圍內的測定。我可以使用這些值嗎？

建議只有在標準曲線的范圍內下降的樣本值。標準曲線的范圍內的值一般是非線性的，這可能導致不正確的外推值。產生值高于標準的樣品應為（進一步）稀釋和重復。如果樣品低于該測定的范圍內，該樣品被認為是不可檢測的。

9。我每次都要運行一個空白或零標準嗎？

是的，這些都是必需的計算，并反映任何微妙但顯著的性能變化，從一天到一天，檢測到檢測。當排除特定的檢測問題的來源時，它們也非常有幫助。

10。我能改變我在檢測中使用的樣本量嗎？

不建議你改變卷由于BG工具被設計為*佳的性能在給定的體積

11。可以使用不同的組件組件嗎？

每一個組件包含有特定批號的組件，以確保所有的組件都進行優化，以及與組件中的所有其他組件。對這些特定的地段進行質量檢驗。這是從來沒有建議使用你自己的組件或組件從其他包或供應商。

12。我的標準曲線看起來很好，但我沒有得到一個信號，我的樣本，當我預期，為什么？

樣品不包含被分析物。一個矩陣的效果可能是掩蓋檢測。確保推薦的稀釋液在試劑盒插入后按規定進行。如果建議稀釋，請檢查是否正確進行稀釋。過稀釋會導致樣品在標準曲線的范圍內下降。

13。你怎么推薦我洗盤子？

如果您使用的是一個自動平板洗衣機，我們建議定期檢查校準，并將該系統在洗滌前沖洗緩沖液沖洗。手動洗衣機也是一樣的。一個中繼器或洗瓶也可以使用。用戶應小心，以確保所有的內容都是送氣和板拍干的無塵紙。【人抗丙型肝炎抗體（抗-HCV）ELISA試劑盒】

14。我需要用一個盤子嗎？

可靠的結果可以得到無板振動，但外徑的一般會低于那些使用平板振動器。

15。為什么我要用波長校正450-570nm之間？

對于酶聯免疫吸附試驗，在雙波長讀的是做正確的光密度貢獻的塑料以及，燈和光學波動。

16。如果我提我的樣本，我還需要遵循推薦的稀釋液試劑盒中插入了嗎？

提取過程中所需的樣本稀釋量將受到影響的純化和濃度的影響的協議使用。稀釋或濃縮的金額將由*終用戶決定。

17。什么是預期的分析物濃度，我應該找到？

一個給定的分析物的量可能會有所不同，不僅從物種的物種，但也組織和細胞來源。這個信息的*佳來源是目前的文獻，很容易通過互聯網在多個科學數據庫訪問。

18。我的光密度有點高（或較低），比那些在手冊中，與我的試劑盒來了。為什么？

光學密度受影響

1.    Do I have to run all of my standards ａnd samples in duplicate?

Yes, the duplicates are run in order to monitor assay precision ａnd increase confidence in the assay results obtained.

2.    Do I have to run all of my samples at one time?

No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.

3.    What types of reproducible results are obtained with the assays?

Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting ａnd washing technique, incubation time or temperature, ａnd kit age can cause variation in result. Each user should obtain their own standard curve.

4.    Is it possible to store the reagents other than indicated?

Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.

5.    How should I store my samples?

Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.

6.    Can I modify the protocol?

BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate ａnd wrong results.

7.    Can I use a sample type that is not recommended in the kit insert?

The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.

8.    My samples generated values that were outside the dynamic range of the assay. Can I use these values?

It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted ａnd the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【人抗丙型肝炎抗體（抗-HCV）ELISA試劑盒】

9.    Do I have to run a Blank or Zero Standards every time?

Yes, these are required for the calculations, ａnd reflect any subtle but significant performance changes from day to day ａnd assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.

10.  Can I alter the volume of sample I use in the assay?

It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes

11.  Can components from different kits be used?

Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.

12.  My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?

The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.

13.  How do you recommend I wash my plate?

If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, ａnd that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated ａnd the plate tapped dry on lint-free paper.

14.  Do I need to use a plate shaker?

Reliable results can be obtained without a plate shaker, but the O.D.＇s will generally be lower than those obtained using a plate shaker.

15.  Why do I have to use wavelength correction between 450-570nm?

For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp ａnd optical fluctuations. 【人抗丙型肝炎抗體（抗-HCV）ELISA試劑盒】

16.  If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?

The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification ａnd concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.

17.  What is the expected concentration of analyte that I should expect to find?

The amount of a given analyte may vary not only from species-to-species, but also between tissue ａnd cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.

18.  My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?

The optical density is affected by a number of physical conditions such as time ａnd temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.

19.  What are the reasons for High Background?

1)     Improper Washing: Check volume of washing buffer reservoir ａnd make sure all recommended washing steps are performed.

2)     Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【人抗丙型肝炎抗體（抗-HCV）ELISA試劑盒】

3)     Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.

4)     Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times ａnd temperatures. However, if all wells are intensely ａnd equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.

9241778RGQ, Inspection Service"The Annual Inspection Service, Rotorgene-Q is a Regional Repair Center equipment service, performed by a QIAGEN service specialist. 

All required testing material ａnd certified equipment is provided by the service specialist. 

During the half day-long procedure, all application-critical modules of the Rotorgene are inspected ａnd tested ａnd an OTV check is conducted. Performed tests ａnd test results are documented in a GMP/GLP-compliant Report."CNY

9241730BR Universal ApplicationPack VeterinaryCNY

9241394C-Nut set, EZ1aCNY

9240749Belt, Shaker, APCNY

9243644Guided Valid Support, QuantiPlex/OPHyresThe QIAGEN Quantiplex/Quantiplex HYres Guided Validation Support service includes all travel ａnd labor charges for a site visit up to 2 days by a QIAGEN Specialist.  A QIAGEN specialist will provide an introduction to the Quantiplex/Quantiplex HYres chemistry utilized in the process, review the Handbook ａnd User Manual, as well as hands-on operation to match the lab’s forensic workflow. The Guided Validation service includes experimental design consulation, internal validation documentation support, ａnd QIAGEN sponsored data templates.  The QIAGEN Specialist will also aide the customer in running some samples to initiate the validation process.  Enough consumable chemistry ａnd accessories (QIAGEN or other vendors) should be purchased by the customer to cover the validation experimental design ａnd are not included in the cost of validation support.CNY

9243642Pyro Q24, Repair Fee"Repair service delivery send to Regional Repair Center

Service response time (repair) 7-10 days turnaround time

Periodic inspection/maintenance: 0

Cost coverage for Repair Parts : yes, full coverage

Cost coverage for labor: yes, full coverage

Cost coverage for travel: yes, full coverage

Replacement system (Loaner) provision: not applicable

Transportation cost coverage: yes, full coverage"CNY

9243540LiquiChip, PM Service"Service response time (repair): not applicable

Periodic inspection/maintenance: yes

Inspection/maintenance delivery: onsite

Cost coverage for Repair Parts : not included

Cost coverage for labor: yes, full coverage

Cost coverage for travel: yes, full coverage

Replacement system (Loaner) provision: not applicable

Transportation cost coverage: yes, full coverage"CNY

9243114Flow Control Valve, Weigh Cell, APCNY

9242862QIArent&go - Rent out fee QSSP CabinetCNY

9242676QS RGQ, InstallationThe Installation, QIAsymphony RGQ facilitates the quick implementation of the QIAsymphony RGQ into the lab routine by minimizing the instrument start-up phase. It covers the hardware ａnd software installation of QIAsymphony RGQ instruments ａnd provides the user with an introductory training. The installation includes or labor ａnd travel costs. The performance of the installation process is documented on a GMP/GLP-compliant Field Service document.CNY

5000-1324Motor 230V, SKR1CNY

206045Type-it Fast SNP Probe PCR Kit (800)"Features

 Outstanding separation for reliably high call rates

 For difficult SNP loci ａnd for low amounts of template

 Validated using TaqMan SNP Genotyping Assays 

 Up to 40% time savings due to fast-cycling procedure

 Convenient ｍaster mix format ａnd optimized protocol"CNY

9001911PyroMark Q24 MDx, PriorityPyroMark Q24 MDx, Priority includes the Pyromark Q24 MDx system, installation ａnd extended warranty. Installation covers hardware ａnd software installation of system ａnd provides user with on site introductory training. Priority package extends warranty period of the system to 2 years with shipment to Repair Center Service ａnd response turnaround time (repair) 7-10 days. One preventive maintenance visit is included for each year of the warranty; 2 preventive maintenance visits in total. Replacement system (Loaner) provision included (provision time 2-3 days) with transportation cost coverage. The service package includes all parts, labor ａnd travel costs with installation performance ａnd service visits documented on a GMP/GLP-compliant Field Service documents. (In the event of shipping logistic limitation, QIAGEN reserves the option to repair the instrument on-site. Response time 48 Hrs)CNY

965842QIAamp 96 DNA Swab BioRobot Kit (12)For 12 x 96 DNA preps: 12 QIAamp 96 Plates, Buffers, QIAGEN Proteinase K, AirPore Tape Sheets, Tape Pad, S-Blocks, Racks with Collection Microtubes (1.2 ml), CapsCNY

133186NeXtalStock Citric acid pH 4.0 (200)CNY

133185NeXtalStock Citric acid pH 3.8 (200)CNY

9018554Cover, front, left, EZ1aCNY

9018529Communicator, Software CD, EZ1aCNY

51206FlexiGene DNA Kit (250)For purification of DNA from 250 ml whole blood: Buffers, QIAGEN ProteaseCNY

51106QIAamp DNA Blood Mini Kit (250)For 250 DNA minipreps: 250 QIAamp Mini Spin Columns, QIAGEN Protease, Reagents, Buffers, Collection Tubes (2 ml)CNY

50214QIAamp UCP Pathogen Mini Kit (50),GCNY

133102NeXtalStock Potassium thiocyanate (200)CNY

9015517ThermocoupleCNY

9015469Motor, MCNY

9001879QIAxcel, PrioPLUS"QIAxcel Advanced Instrument 

Installation of QIAxcel Advanced & Introductory training 

Warranty extension to 3 yrs

Repair Center service, response 7-10

Loaner available in 2 days*

Preventive Maintenance (onsite or RRC,  1 PM per year)

Priority service provision over non-contract customers

Documented installation & PM report

Unlimited number of repair service

All cost covered (travel, labor, parts)"CNY

9001876EZ1 Advanced XL, PrioPLUS"EZ1 Advanced XL Instrument 

Installation of EZ1 instrument & Introductory training 

Warranty extension to 3 yrs

On site service, 48 hr response

Preventive Maintenance (1 onsite PM per year)

Priority service provision over non-contract customers

Documented installation & PM report

Unlimited number of repair service

All cost covered (travel, labor, parts)"CNY

9001870Rotor-Gene Q 6plex (PC) PrioPLUS"Rotor-Gene Instrument 

Installation of Rotor-Gene & Introductory training 

Warranty extension to 3 yrs

Repair Center service, response 7-10

Loaner available in 2 days*

Annual Inspections (1 onsite PM per yearr)

Priority service provision over non-contract customers

Documented installation & PM report

Unlimited number of repair service

All cost covered (travel, labor, parts)"CNY

9012471Side Panel Assembly, Arm, RCSCNY

958236MagAttract RNA Cell Mini M48 Kit (192)CNY

9018455Linear guide, Z axis, QXCNY