產品展示
大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨
點擊次數:30發布時間:2016/8/5 22:57:49

更新日期:2016/8/5 22:57:49
所 在 地:中國大陸
產品型號:
優質供應
詳細內容
齊一生物銷售:021-6034 8496;181214 53965;173021 04490
1。我必須運行所有的標準和樣品的重復?
是的,重復的運行,以監測測定的精度和提高檢測結果的信心。
2。我必須在一次運行所有的樣品嗎?
不,每個試劑盒采用stripwell微孔板。這允許用戶在不同的時間來分析不同數量的樣品。
3。什么類型的可重復性的結果,得到與分析?
每一個工具都有一個包含一個典型數據的圖表的手冊。在運營商的任何變化,移液和洗滌技術,培養時間、溫度、試劑盒的年齡可以引起變化的結果。每個用戶都應該得到自己的標準曲線。
4。是否有可能儲存的試劑比表示?
在不推薦使用條件下的部件組件的存儲,以保證測試的正確性能。
5。我應該如何儲存我的樣品?
樣品應保存在-20°C或更低的溫度。長期儲存,建議凍結他們?cè)?/span>- 70余。
6。我可以修改協議嗎?
BG的ELISA試劑盒進行了優化,提供*佳的結果。修改的格式或協議可能會給出錯誤的結果。
7。我可以使用一個不建議在試劑盒插入的樣本類型嗎?
該試劑盒已被驗證在試劑盒插入的樣品類型。未經檢驗的樣品類型。為進一步信息的聯系技術服務。
8。我的樣本產生的值,在動態范圍內的測定。我可以使用這些值嗎?
建議只有在標準曲線的范圍內下降的樣本值。標準曲線的范圍內的值一般是非線性的,這可能導致不正確的外推值。產生值高于標準的樣品應為(進一步)稀釋和重復。如果樣品低于該測定的范圍內,該樣品被認為是不可檢測的。
9。我每次都要運行一個空白或零標準嗎?
是的,這些都是必需的計算,并反映任何微妙但顯著的性能變化,從一天到一天,檢測到檢測。當排除特定的檢測問題的來源時,它們也非常有幫助。
10。我能改變我在檢測中使用的樣本量嗎?
不建議你改變卷由于BG工具被設計為*佳的性能在給定的體積
11?梢允褂貌煌慕M件組件嗎?
每一個組件包含有特定批號的組件,以確保所有的組件都進行優化,以及與組件中的所有其他組件。對這些特定的地段進行質量檢驗。這是從來沒有建議使用你自己的組件或組件從其他包或供應商。
12。我的標準曲線看起來很好,但我沒有得到一個信號,我的樣本,當我預期,為什么?
樣品不包含被分析物。一個矩陣的效果可能是掩蓋檢測。確保推薦的稀釋液在試劑盒插入后按規定進行。如果建議稀釋,請檢查是否正確進行稀釋。過稀釋會導致樣品在標準曲線的范圍內下降。
13。你怎么推薦我洗盤子?
如果您使用的是一個自動平板洗衣機,我們建議定期檢查校準,并將該系統在洗滌前沖洗緩沖液沖洗。手動洗衣機也是一樣的。一個中繼器或洗瓶也可以使用。用戶應小心,以確保所有的內容都是送氣和板拍干的無塵紙。【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
14。我需要用一個盤子嗎?
可靠的結果可以得到無板振動,但外徑的一般會低于那些使用平板振動器。
15。為什么我要用波長校正450-570nm之間?
對于酶聯免疫吸附試驗,在雙波長讀的是做正確的光密度貢獻的塑料以及,燈和光學波動。
16。如果我提我的樣本,我還需要遵循推薦的稀釋液試劑盒中插入了嗎?
提取過程中所需的樣本稀釋量將受到影響的純化和濃度的影響的協議使用。稀釋或濃縮的金額將由*終用戶決定。
17。什么是預期的分析物濃度,我應該找到?
一個給定的分析物的量可能會有所不同,不僅從物種的物種,但也組織和細胞來源。這個信息的*佳來源是目前的文獻,很容易通過互聯網在多個科學數據庫訪問。
18。我的光密度有點高(或較低),比那些在手冊中,與我的試劑盒來了。為什么?
光學密度受影響
1. Do I have to run all of my standards and samples in duplicate?
Yes, the duplicates are run in order to monitor assay precision and increase confidence in the assay results obtained.
2. Do I have to run all of my samples at one time?
No, each kit uses stripwell microplate. This allows the user to analyse different numbers of samples at different times.
3. What types of reproducible results are obtained with the assays?
Each kit comes with a manual containing a graph of typical data obtained. Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
4. Is it possible to store the reagents other than indicated?
Storage of the kit components under conditions other than indicated is not recommended in order to assure proper performance of the test.
5. How should I store my samples?
Samples should be stored at -20oC or lower temperature. For long-term storage, it is recommended to freeze them at -70oC -80oC.
6. Can I modify the protocol?
BG ELISA kits have been optimized to provide the best possible results. Modifying the format or protocol may give inaccurate and wrong results.
7. Can I use a sample type that is not recommended in the kit insert?
The kit has been validated for the sample types listed in the kit insert. Sample types other than those validated have not been tested. Contact Technical Service for further information.
8. My samples generated values that were outside the dynamic range of the assay. Can I use these values?
It is recommended that only sample values that fall within the range of the standard curve be used. Values outside the range of the standard curve are generally non-linear, which can lead to incorrectly extrapolated values. Samples that generate values higher than the highest standard should be (further) diluted and the assay repeated. If samples fall below the range of the assay, the sample is considered to be non-detectable. 【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
9. Do I have to run a Blank or Zero Standards every time?
Yes, these are required for the calculations, and reflect any subtle but significant performance changes from day to day and assay to assay. They are also extremely helpful when troubleshooting the source of a particular assay problem.
10. Can I alter the volume of sample I use in the assay?
It is not recommended that you alter the volumes since all BG kits are designed for optimal performance at the given volumes
11. Can components from different kits be used?
Each kit contains components which have specific lot numbers to ensure that all of the components are performing optimally alone, as well as with all of the other components in the kit. QC testing is performed on these specific lots. It is never recommended to use your own components or components from other kits or vendors.
12. My standard curve looked fine, but I didn’t get a signal in my sample when I expected to, why?
The sample may not contain the analyte. A matrix effect may be masking the detection. Ensure that the recommended dilution was followed as stated in the kit insert. If dilution was recommended, check to be sure that the dilution was performed properly. Over-dilution may cause the sample to fall below the range of the standard curve.
13. How do you recommend I wash my plate?
If you are using an automated plate washer we recommend that the calibration be checked on a regular basis, and that the system is flushed with the Plate Washing Buffer prior to washing. The same is true for a manual washer. A repeater or a wash bottle can also be used. The user should be careful to ensure that all of the contents are aspirated and the plate tapped dry on lint-free paper.
14. Do I need to use a plate shaker?
Reliable results can be obtained without a plate shaker, but the O.D.'s will generally be lower than those obtained using a plate shaker.
15. Why do I have to use wavelength correction between 450-570nm?
For the ELISA assay, reading at dual wavelengths is done to correct for the optical density contributed by the plastic well, the lamp and optical fluctuations. 【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
16. If I extract my sample, do I still need to follow the recommended dilutions given in the kit insert?
The amount of sample dilution needed after an extraction procedure will be affected by the effects of purification and concentration in the protocol used. The amount of dilution or concentration will have to be determined by the end-user.
17. What is the expected concentration of analyte that I should expect to find?
The amount of a given analyte may vary not only from species-to-species, but also between tissue and cellular sources. The best source of this information is the current literature that is easily accessed through the Internet at multiple scientific databases.
18. My optical densities were a little higher (or lower) than those in the manual that came with my kit. Why?
The optical density is affected by a number of physical conditions such as time and temperature. We suggest that you shorten or lengthen the final incubation with substrate solution to compensate.
19. What are the reasons for High Background?
1) Improper Washing: Check volume of washing buffer reservoir and make sure all recommended washing steps are performed.
2) Contaminated Substrate: Make sure there is no contamination of the substrate with metal ions or oxidizing reagents, before use. Keep the extra substrate solution separately during the ELISA substrate development time. 【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
3) Substrate exposed to light: Exposure to light may result in a blue color of the substrate. Keep solutions in the dark (vial) until ready to dispense into the plate.
4) Wrong Incubation Times/Temperatures: Generally follow the test protocol regarding incubation times and temperatures. However, if all wells are intensely and equally colored with no intensity gradient observed in the standard dilution series, then it may be necessary to observe the substrate reaction as the color is developing, in order to stop the reaction sooner.
800160 Single Read, w/o prep "Sequencing of plasmid DNA and PCR products, including DNA quality control
Repetition of sequencing, if necessary
Data collected to maximal read length" CNY
800101 Basic Read Tubes CNY
765512 PAXgene Tissue STABILIZER Conc. (150 ml) CNY
132007 EasyXtal 15-well Tool (100) CNY
201207 Taq DNA Polymerase (5000) "20 x 250 units Taq DNA Polymerase, 10x PCR Buffer,* 5x Q-Solution, 25 mM MgCl2
NEW! Now with 10x CoralLoad PCR Buffer
Taq DNA Polymerase is now supplied with CoralLoad PCR Buffer, which has all of the advantages of QIAGEN PCR Buffer but can also be used to directly load the PCR reaction onto an agarose gel without the need to add a gel loading buffer. CoralLoad PCR Buffer provides the same high PCR specificity and minimal reaction optimization as conventional QIAGEN PCR Buffer. Additionally, it contains two marker dyes: an orange dye and a red dye, that facilitate estimation of DNA migration distance and optimization of agarose gel run time." CNY
9238319 V-drive unit, BR8000, V2 CNY
9238178 QIAplate Holder, SBS, black CNY
9238134 Multiwell-Plate Holder, SBS CNY
9240675 Tee, Barbed, Plastic, AP96 CNY 【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
9240653 Pressure Pump, Gast, 120V, AP96 CNY
9240624 Solid State Relay, AP196/98 CNY
9240576 Cable Assy, Capper, X51,CCW, AP96/196 CNY
9240546 Motor, Shutter Door, Eppendorf, AP196/98 CNY
9240544 Centrifuge, 5810RA, Eppendorf, AP196/98 CNY
9240513 Mouse, Standard, AP CNY
9240508 Software & Std. Protocols, AP98 CNY
9240499 Reagent Pump, AP CNY
9240378 Autopure, Installation The Installation, AUTOPURE facilitates the quick implementation of the AUTOPURE into the lab routine by minimizing the instrument start-up phase. It covers the hardware and software installation of the AUTPOURE instrument and provides the user with an introductory training on operation and user maintenance. The installation includes labor and travel costs. The performance of the installation process is documented on a GMP/GLP-compliant Field Service document. CNY
9240242 Connector, disp. tip adapter drive, TR CNY
9239959 EZ1, Premium Agreement The Premium Cover Agreement EZ1 provides full service coverage for the BioRobot EZ1. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visits, with costs for labor and parts covered. With a Full Agreement, there is a priority response time of 24 hours (1 working day). CNY
9020028 ZB sensor, 320mm, EZ1xl CNY
9020018 Upgrade kit, vacuum chamber, CAS-1820 CNY
9019987 PCB, small breakout, 8 core, Cxx CNY
9019927 Cover, tip ejector (UV), Cx8 CNY
9019926 PCB, Microboard, Cxx CNY 【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
9019488 Filter, polycap incl. tube/coupling, CX1 CNY
9238856 #Basic Cover Agreement MDx, 2PM, 1yr The Basic Cover Agreement MDx, 2PM provides full service coverage for the BioRobot MDx. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes two annual preventive maintenance visits, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days. CNY
9238839 #Twister II, Basic Agreement, no PM The Basic Cover Agreement BR Twister II provides full service coverage for the BioRobot Twister II. Costs for service visits are fully covered including travel, labor, and parts. With a Basic Cover Agreement, the response time is 5 working days. CNY
9241178 Fuse, 4A, 250VAC, QX CNY
9238830 BR 3000, Basic Agreement The Basic Cover Agreement 3000 provides full service coverage for the BioRobot 3000. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes one annual preventive maintenance visit, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days. CNY
9238813 Rectangular carrier for 20 RIA-tubes CNY
QYS-03083 總巰基測試盒 100管/48樣 酶標法
QYS-03084 超氧化物歧化酶SOD測試盒 50管/48樣 可見分光光度法
QYS-03085 超氧化物歧化酶SOD測試盒 100管/96樣 酶標法
QYS-03086 過氧化氫酶CAT測試盒 50管/48樣 紫外分光光度法
QYS-03087 過氧化物酶POD測試盒 50管/48樣 可見分光光度法
QYS-03088 多酚氧化酶PPO測試盒 50管/24樣 可見分光光度法
QYS-03089 多酚氧化酶PPO測試盒 100管/48樣 酶標法
QYS-03090 苯丙氨酸解氨酶PAL測試盒 50管/48樣 紫外分光光度法
QYS-03091 苯丙氨酸解氨酶PAL測試盒 100管/96樣 酶標法
QYS-03092 脯氨酸PRO含量測試盒 50管/48樣 可見分光光度法
QYS-03093 ATP含量測試盒 50管/48樣 高效液相色譜法
QYS-03094 ADP含量測試盒 50管/48樣 高效液相色譜法
QYS-03095 AMP含量測試盒 50管/48樣 高效液相色譜法
QYS-03096 Na+k+——ATP酶測試盒 50管/24樣 可見分光光度法
QYS-03097 Na+k+——ATP酶測試盒 100管/48樣 酶標法 【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
QYS-03098 Ca++Mg++——ATP酶測試盒 50管/24樣 可見分光光度法
QYS-03099 Ca++Mg++——ATP酶測試盒 100管/48樣 酶標法
QYS-03100 硝酸還原酶測試盒 50管/24樣 可見分光光度法
QYS-03101 硝酸還原酶測試盒 100管/48樣 酶標法
QYS-03102 谷氨酸合成酶GOGAT測試盒 50管/48樣 紫外分光光度法
QYS-03103 谷氨酰胺酶GLS測試盒 50管/48樣 可見分光光度法
QYS-03104 谷氨酸脫氫酶GDH測試盒 50管/48樣 紫外分光光度法
QYS-03105 NO含量測試盒 50管/24樣 可見分光光度法
QYS-03106 NO含量測試盒 100管/48樣 酶標法
QYS-03107 水土中亞硝酸鹽含量測試盒 50管/48樣 可見分光光度法
QYS-03108 水土中亞硝酸鹽含量測試盒 100管/96樣 酶標法
QYS-03109 食品中亞硝酸鹽含量測試盒 50管/48樣 可見分光光度法
QYS-03110 食品中亞硝酸鹽含量測試盒 100管/96樣 酶標法
QYS-03111 谷氨酰胺合成酶GS測試盒 50管/24樣 可見分光光度法
QYS-03112 谷丙轉氨酶GPT測試盒 50管/24樣 可見分光光度法
QYS-03113 谷丙轉氨酶GPT測試盒 100管/48樣 酶標法 【大鼠膽固醇7α-羥化酶(CYP7a1)ELISA試劑盒現貨】
QYS-03114 谷草轉氨酶GOT測試盒 50管/24樣 可見分光光度法
QYS-03115 谷草轉氨酶GOT測試盒 100管/48樣 酶標法