【友情提示】：本產品僅供科研研究使用，不得用于人體臨床直接檢測。避免給您帶來不必要的損失，請仔細閱讀購買說明！

本試劑盒僅供研究使用，齊一生物銷售：021－6034 8496；181214 53965；173021 04490歡迎選購！

操作步驟

1.準備試劑，樣品和標準品

2.加入準備好的樣品和標準品，37℃反應30分鐘

3.洗板5次，加入酶標試劑，37℃反應30分鐘

4.洗板5次，加入顯色液A、B，37℃顯色15分鐘

5.加入終止液

6.15分鐘之內讀OD值

7.計算
齊一生物供應ELISA試劑盒檢測的目的是為實驗提供準確可靠的定量分析實驗依據。為了保證實驗數據的可靠性，在實驗過程中必須堅持全面質量控制和全過程質量控制。在收集標本前都必須有一個完整的計劃。

【人ATP合酶6(ATP6)ELISA試劑盒】樣本保存條件：

1.2-8℃冰箱*多放2周

2.-20到-50℃的冰箱可以放3-6個月

3.-50℃以下的冰箱，可以放一年

【人ATP合酶6(ATP6)ELISA試劑盒】樣本收集

1.血清樣本用干燥管（紅色）或者促凝管（黃色）收集

2.血漿用抗凝管，一般有EDTA抗凝（紫色）、枸櫞酸鈉抗凝（黑色或者藍色）

3.動物組織勻漿（細胞）：

              1g組織加入9ml PBS（濃度為0.1M，pH為7.4的）測分泌型指標

              1g組織加入1ml組織裂解液加入8ml PBS 測細胞內

糞便樣本：1g樣本+9ml PBS（濃度為0.01M，pH為7.4的）

沒有PBS的話也可以用一下生理鹽水，還是用PBS

【人ATP合酶6(ATP6)ELISA試劑盒】樣本離心轉速及時間

1.試管采集的樣本：3000轉，離心五分鐘取上清

2.離心管或者EP管采集的樣本：5000－－8000轉3分鐘取上清

3..樣本保存－－如果樣品不立即使用，應將其分成小部分-70 ℃保存，避免反復冷凍。盡可能的不要使用溶血或高血脂血。如果血清中大量顆粒，檢測前先離心或過濾。不要在37℃或更高的溫度加熱解凍。應在室溫下解凍并確保樣品均勻地充分解凍。

【人ATP合酶6(ATP6)ELISA試劑盒】以上樣本采集及處理方式供您參考，如有問題請來電，齊一生物銷售：021－6034 8496；181214 53965；173021 04490

9020195Clamp, worktable (marked "II"), CX1CNY

9020190Tubing Weight, RCSCNY

9020183PCB, LED, Upgrade, RGQCNY

9020163Vacuum Pump (220-240 V), PyroQ24VWCNY

9020144Felt shim, Receiver, QXCNY

9020089Fuse Insert, 15 A, TLyser 2CNY

9239522O Ring, #010, Nitrile, 70D (Set of 10)CNY

9239516Fuse&Holder,1Amp,Fblo,PicoSmd(10)CNY

9239508EX CBA, MC DSP, w/USBCNY

9239505Fitting,Adap1/8Ba-Mal1/4-28Flat(10)CNY

9239493Hood LEDCNY

9239481Fluidics, Luminex 100CNY

9239441Barcode scanner, hand-held, v2.0hand-held scanner. This is a valid item in SAP.CNY

9232886Camera, bar-code, DensoCNY

9232869Lightway, door, buffer track, BR8000CNY

9232834Tips Disposable Eppendorf 300 ulCNY

9232808Tool, Calibration, PlateReader auto pos.CNY

9236503Training Customized BioRobotCNY

9232756Back Reagent Plate, printedCNY

9236492Centrifuge 4-16KS, Full Agreement, no PM"Repair service delivery: onsite

Service response time (repair): 48 hours/2 business days

Periodic inspection/maintenance: not included

Inspection/maintenance delivery: not applicable

Cost coverage for Repair Parts : yes, full coverage

Cost coverage for labor: yes, full coverage

Cost coverage for travel: yes, full coverage

Replacement system (Loaner) provision: not applicable

Transportation cost coverage: not applicable"CNY

9236485Full Agreement, Plato 3, 1 yrThe Full Agreement Plato 3 provides full service coverage for the Plato 3 workstation. Costs for service visits are fully covered including travel, labor, ａnd parts. The agreement also includes one annual preventive maintenance visit, with costs for labor ａnd parts covered. With a Full Agreement, there is a priority response time of 48 hours (2 working days).CNY

9013063Plate Stacker, detachable, BR8000CNY

9013004Gripper set, T-handlerCNY

672291ipsogen PML-RARA bcr2 StandardsCNY

670724ipsogen BCR-ABL1 Mbcr IS-MMR Kit (30) CECNY

386123Matrix Standard BT5 multi cap. (25)CNY

384013Investigator DIPplex Kit (25)CNY

9001510Hybrid Capture System 2 (non-US)CNY

9001272TissueRuptor (230V, 50-60 Hz, EU/CH)CNY

4877004pg AIV-H9 RT-PCR ASSAYCNY