【小鼠凝血因子Ⅱ(FⅡ)ELISA試劑盒】齊一生物銷售：021－6034 8496；181214 53965；173021 04490

規格:小規格48T.大規格96T

樣本標準：血清,血漿,尿液,胸腹水,腦脊液,細胞培養上清,組織勻漿等

檢測方法：酶聯免疫分析（ELISA）

運輸保存：2~8°貯存.保質期：6個月

試驗所需自備物品:

1. 酶標儀(450nm 波長濾光片)

2. 高精度移液器，EP 管及一次性吸頭

3. 37℃恒溫箱，雙蒸水或去離子水

4. 吸水紙

 

【小鼠凝血因子Ⅱ(FⅡ)ELISA試劑盒】齊一生物主要經營進口原裝Elisa試劑盒,檢測試劑種類齊全,價格實惠！購買齊一生物產品的新老客戶都可享免費代測實驗服務,全程提供技術支持.如需其它Elisa試劑盒說明書及產品價格,可來電咨詢齊一生物銷售：021-6034 8496；181214 53965；173021 04490

 

試劑盒特點

一、高效、靈敏、特異的抗體；

二、穩定的重復性和可靠性；

三、吸附性能好,空白值低,孔底透明度高的固相載體；

四、適用血清、血漿、組織勻漿液、細胞培養上清液、尿液等等多種標本類型；

 

試劑盒可概括四個方面：

1、免疫酶染色各種細胞內成份的定位.

2、研究抗酶抗體的合成.

3、顯現微量的免疫沉淀反應.

4、定量檢測體液中抗原或抗體成份.

【小鼠凝血因子Ⅱ(FⅡ)ELISA試劑盒】ELISA試劑盒為您節省實驗經費.

elisa試劑盒回收率是反應待測物在樣品分析過程中的損失的程度,損失越少,回收率越高,如果作標液1PPM,就是1毫克/升,而作出標準數據為0.99毫克/升,就是說你的回收率是99%,這個與真實成分有密切的關系,說明方法的準確度.比如水中總無機氯含量測定,樣品水中含有無機氯20mg/L,取100mL被測水樣品,加入0.1mL濃度為10mg/mL的含無機氯標準樣品,測定時忽略體積變化,如果測定出樣品中無機氯為2.98mg/L,則認為回收率為99%.

【小鼠凝血因子Ⅱ(FⅡ)ELISA試劑盒】試劑盒制備方法包括以下步驟：

1)抗原表位的計算機篩選；

2)抗原的制備；

3)血清的采集；

4)間接ELISA方法的建立；

5)間接ELISA方法的敏感性和特異性驗證；

6)試劑盒的穩定性驗證；

7)對大量樣本進行檢測.該方法簡單、快速、靈敏度高、特異性強、穩定性合格、重復性好.應用本發明制得的試劑盒能有效檢出樣本含量.適用于大批量樣本的檢測

試劑盒安全性提示：

1.工作人員實驗中避免直接接觸終止液和底物A、B。一旦接觸到這些液體，請盡快用水沖洗。

2.實驗中不要吃喝、抽煙或使用化妝品。

3.不要用嘴吸取試劑盒里的任何成份。

【小鼠凝血因子Ⅱ(FⅡ)ELISA試劑盒】齊一生物【友情提示】：本產品僅供科研研究使用，不得用于人體臨床直接檢測。避免給您帶來不必要的損失，請仔細閱讀購買說明！

 

���R ��(j���ng=EN-US>1-2分鐘，350μl/每孔，甩干。
6.         依序每孔加底物溶液90μl，37℃避光顯色（30分鐘內，此時肉眼可見標準品的前3-4孔有明顯的梯度藍色，后3-4孔梯度不明顯，即可終止）。
7.         依序每孔加終止溶液50μl，終止反應（此時藍色立轉黃色）。終止液的加入順序應盡量與底物液的加入順序相同。為了保證實驗結果的準確性，底物反應時間到后應盡快加入終止液。
8.         用酶聯儀在450nm波長依序測量各孔的光密度（OD值）。 在加終止液后15分鐘以內進行檢測。
【小鼠的牛血清白蛋白殘留檢測ELISA試劑盒】注：
1. 用戶在初次使用試劑盒時，應將各種試劑管離心數分鐘，以便試劑集中到管底。
2. 每次實驗留一孔作為空白調零孔，該孔不加任何試劑，只是*后加底物溶液及2N H2SO4。測量時先用此孔調OD值至零。
3. 為防止樣品蒸發，試驗時將反應板放于鋪有濕布的密閉盒內，酶標板加上蓋或覆膜。
4. 未使用完的酶標板或者試劑，請于2-8℃保存。標準品、生物素標記抗體工作液、辣根過氧化物酶標記親和素工作液請依據所需的量配置使用。請勿重復使用已稀釋過的標準品、生物素標記抗體工作液或、辣根過氧化物酶標記親和素工作液。
5. 建議檢測樣品時均設雙孔測定，以保證檢測結果的準確性。
以上資料僅供您參考，如有問題歡迎來電，齊一生物銷售：021－6034 8496；181214 53965；173021 04490

 

 

9010858BGR DT-Abstreifer 8-fach P7xxx DCNY

931036QIAsymphony Virus/Bact Mini Kit (192)CNY

133248NeXtalStock Sodium succinate pH6.5 (200)CNY

330603RT² SYBR Green FAST Mastermix (24)CNY

929608QX Pro Separation Buffer (40 ml)CNY

5000-1415Knob RB671CSKWL Matte, VTX2CNY

5000-1408Cable Shielded 1/17HP, VTX2CNY

L2170hc2 CT/GC HC2 DNA Test PI (CD-ROM)CNY

L1971Rotary Shaker User＇s ManualCNY

9240705O-ring Kit, Capper, Spindle, APCNY

9240693Actril Sterilant & Test Strips, APCNY

9243653Comprehen Valid., Other Extraction Sys"""The Comprehensive Validation Support plan specific to a laboratory＇s needs will incorporate all of the requirements for the internal validation guidelines from the FBI＇s Quality Assurance Standards (QAS).

The Comprehensive Validation Support service includes all travel ａnd labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, ａnd amplify the validation study samples ａnd may require multiple individuals. Usually, two weeks is required to analyze the data ａnd one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.

Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform ａnd complete all extractions, quantifications, amplfications, ａnd capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation. 

Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation.  Non-QIAGEN chemistry ａnd accessories are not included ａnd should  be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) ａnd required substrates (swabs, materials, etc).   The Customer is expected to have all materials on-hand 1 week prior to the validation start date.

Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) ａnd STR (amp) analysis ａnd linkage to starting samples.

Validation data CD/flashdrive – QIAGEN will review the validation data ａnd draft a validation summary document, ensuring compliance with the FBI＇s QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review ａnd signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.

Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation ａnd generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager ａnd the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """CNY

386516Investigator STR GO! Lysis Buffer (200)CNY

208256QuantiNova Probe PCR Kit (2500)CNY

208254QuantiNova Probe PCR Kit (500)CNY

180984GeneRead Adapter I Set 12plex (72)CNY

614035careHPV Test, SFDA (96-test)CNY

282605virotype Influenza A RT-PCR Kit (96)CNY

272703pigtype PRRSV Ab (5)CNY

273003pigtype Salmonella Ab (5)CNY

280377virotype BVDV RT-PCR Kit (480)CNY

9018462Marker Kit, QC tool, QXCNY

800372Shipping, Postage, Packaging (express)CNY

800373Data CarrierCNY

9019521ZLV ADAPTER KIT M&N 8 STRIPCNY

9019595ZLV Bush, tip stripper, Cx8CNY

9019935Cable harness, X-axis 8 core, CQXCNY

9020596Tape Foam,045X750 Double Stick,DML 3000CNY

9017843Tool, cable, communication, RS232, QIACCNY

9013401Cable set, cooling system, 90/120CNY