1. 酶標儀(450nm 波長濾光片)

2. 高精度移液器，EP 管及一次性吸頭

3. 37℃恒溫箱，雙蒸水或去離子水

4. 吸水紙

【人類似RIKENcDNA2610307008基因ELISA試劑盒】齊一生物【友情提示】：本產品僅供科研研究使用，不得用于人體臨床直接檢測。避免給您帶來不必要的損失，請仔細閱讀購買說明！

ELISA應用：

ELISA檢測試劑盒、ELISAKit、酶聯免疫試劑盒、酶聯免疫吸附測定試劑盒、酶聯免疫分析試劑盒、酶免試劑盒等,比較常見的叫法是ELISA檢測試劑盒、酶聯免疫吸附測定試劑盒等ELISA試劑盒自從60-70年代問世以來,得到全世界科研工作者的認可及推崇,在歐美及中國獲得很大的推廣,尤其是國內生化領域的長足發展.Elisa生物試驗是一種敏感性高,特異性強,重復性好的實驗診斷方法.由于其試劑穩定、易保存,操作簡便,結果判斷較客觀等因素,已廣泛應用在免疫學檢驗的各領域中.ELISA檢測試劑盒適用于體外定性檢測人血清或血漿中的抗人類戊型肝炎（HEV）病毒IgM抗體ELISA檢測

【人類似RIKENcDNA2610307008基因ELISA試劑盒】齊一生物科技歡迎您訂購咨詢，齊一生物銷售：021－6034 8496；181214 53965；173021 04490

齊一生物供應的ELISA試劑盒安全性提示：

1.工作人員實驗中避免直接接觸終止液和底物A、B。一旦接觸到這些液體，請盡快用水沖洗。

2.實驗中不要吃喝、抽煙或使用化妝品。

3.不要用嘴吸取試劑盒里的任何成份。

樣本保存條件：

1.2-8℃冰箱*多放2周

2.-20到-50℃的冰箱可以放3-6個月

3.-50℃以下的冰箱，可以放一年

【人類似RIKENcDNA2610307008基因ELISA試劑盒】齊一生物供應的ELISA試劑盒ELISA實驗原理

試劑盒是固相夾心法酶聯免疫吸附實驗（ELISA）.已知濃度的標準品、未知濃度的樣品加入微孔酶標板內進行檢測.先將生物素標記的抗體同時溫育.洗滌后,加入親和素標記過的HRP.再經過溫育和洗滌,去除未結合的酶結合物,然后加入底物A、B,和酶結合物同時作用.產生顏色.顏色的深淺和樣品中的濃度呈比例關系.

免疫測定技術的基礎在于抗原抗體之間的特異結合反應,所以任何優質的診斷試劑離不開優質的原料,如抗原抗體,酶等.以前用于免疫測定的抗原通常為各種純化抗原,而抗體則為純化抗原免疫動物后獲得的多克隆抗體和使用雜交瘤技術得到的單克隆抗體,而抗原或抗體的標記物如酶標結合物則通過各種化學合成方法制備.近年來,隨著分子生物學的發展,使用基因工程方法制備各種特殊的抗原或抗體及其酶結合物等免疫測定試劑幾成為現實的新一代試劑,各種新型使用的測定方法也不斷出現.

HBsAg試劑特點（檢測模式：臨床抗體夾心法）：包被抗體為山羊多抗.多抗具有高親和性和對抗原各種表位的反應性.酶表抗體為與HBsAg有不同結合位點的鼠復合單位,可測得HBsAg變異樣品,提高檢測的特異性（99.98%）提高檢測的靈敏度,應用ParlEhrich學說（PEI）HBsAg標準品,對ad標準品的靈敏度為0.05ng/ml對ay標準品靈敏度為0.025ng/ml

ELISA檢測試劑盒應用定性夾心免疫檢測技術,用合成的HEV多肽抗原包被微孔板板條,這些多肽是中國型HEV毒株核心氨基酸序列中抗原性很強的肽段,分別來自于該毒株的開放閱讀框2和開放閱讀框3.將樣品或標準品加入孔中并孵育,如果其中存在HEVIgM抗體,這些抗體就會與HEV的多肽抗原結合,并固定在上面,洗板除去其它非特異性抗體和樣品中的其它成份.然后加入羊抗人IgM-HRP（辣根過氧化物酶）酶結合物,經第二次孵育后,酶結合物就會與次孵育結合上的HEVIgM抗體相結合,洗板除去未結合的酶結合物,加入TMB底物溶液,在第三次孵育時會發生酶-底物反應,只有那些含有HEVIgM抗體和酶結合物所形成的復合物的孔才會發生顏色變化,加入硫酸溶液終止酶和底物間的反應,并在波長:450nm處測量O.D.值,按照本HEVIgM抗體elisa試劑盒的測試標準,O.D.值大于或等于Cut-Off值的樣品被認為是初試陽性. 【人類似RIKENcDNA2610307008基因ELISA試劑盒】

以上資料僅供參考了解，不供于論文寫作

齊一生物專業為您提供高品質，高靈敏度.高質量的酶聯免疫試劑盒，齊一生物長期經營ELISA試劑盒（免費代測）及抗體、分子學生物試劑盒、金標法檢測試劑盒、比色法檢測試劑盒、細胞菌株、培養基、細胞因子、生化試劑、耗材等生物試劑產品。齊一生物銷售：021－6034 8496；181214 53965；173021 04490

9240681Dump Tray, Overflow Control, AP96/196CNY

9240787Update, Capper In/Out Motor, AP98CNY

6000-5013RLumiCheckPlate User Package(Refurbished)CNY

9241783Rotor - Gene Q Demopool BoxCNY

9241769QIAxtractor, Full AgreementThe Full Agreement, QIAxtractor provides full service coverage for the QIAxtractor ａnd the CAS 1280. Costs for service visits are fully covered including travel, labor, ａnd parts. One on-site pipetting head service ａnd inspection is included . With a Full Agreement, there is a priority response time of 48 hours (2 working days).CNY

9241368Interlock, IL1, EZ1aCNY

9241366Cable, UV lamp voltage converter, EZ1aCNY

9240762Co-Processor, AP96CNY

9240760Update, Bucket/Elevator Head, AP196/98CNY

9243549Pyro Q96 MD, PM Service"Service response time (repair): not applicable

Periodic inspection/maintenance: yes

Inspection/maintenance delivery: onsite

Cost coverage for Repair Parts : not included

Cost coverage for labor: yes, full coverage

Cost coverage for travel: yes, full coverage

Replacement system (Loaner) provision: not applicable

Transportation cost coverage: yes, full coverage"CNY

9242786RCS, Full Agreement, 2PM"Repair service delivery: onsite ａnd to Regional Repair Center

Service response time (repair): 48 hours/2 business days or 7-10 working days for RRC repairs

Periodic inspection/maintenance: yes, 2/agreement year

Inspection/maintenance delivery: onsite for RCS only

Cost coverage for Repair Parts : yes, full coverage

Cost coverage for labor: yes, full coverage

Cost coverage for travel: yes, full coverage

Replacement system (Loaner) provision: not applicable

Transportation cost coverage: yes, included"CNY

9242714Validation Support, 5d, QIAgilityThe QIAGEN QIAgility Accelerated Validation Support service includes all travel ａnd labor charges for a site visit up to 5 days by a QIAGEN Specialist.  A QIAGEN specialist will provide an introduction to the QIAgility system ａnd software, review the User Manual, as well as hands-on user support ａnd QIAgility instrument operation.  The Accelerated Validation service includes guidance on the laboratory’s validation experimental design, internal validation documentation support, ａnd QIAGEN sponsored data templates. The QIAGEN Specialist will support the customer by running samples through the QIAGEN-only extraction method/system (does not include phenol-chloroform or similar methods), as well as general wet lab support such as pipetting for quantification, STR ａnd CE setup, normalization, etc. to produce the data needed for the validation study. The customer is responsible for submitting the data to QIAGEN for assisted data analysis. The customer is responsible for final documentation ａnd report using QIAGEN prepared templates provided with the final product. Enough consumable chemistry ａnd accessories (QIAGEN or other vendors) should be purchased to cover the validation experimental design ａnd are not included in the cost of validation support.  Please indicate which processes (quant setup, normalization, PCR setup, CE setup) ａnd kit manufacturer (Applied Biosystems, Promega, QIAGEN) need to be included in the validation.CNY

9242531QIAsymphony SPAS, PM AgreementCNY

9242546Probe Holder Assembly, LX200, LCCNY

9242152Upgrade, CAS1820 vacuum DX/VX"The Upgrade, CAS 1820 vacuum DX/VX upgrades the X-tractorgene to use the improved vacuum system for the QIAxtractor. The upgrade is conducted as an on-site service, performed by a QIAGEN service specialist.

The upgrade allows for the usage of the QIAGEN DX ａnd VX capture plates ａnd the disposable silicon mats.

During the service, the new vacuum system is installed ａnd the software is updated. Please note that due to the software upgrade the instrument will only run the QIAxtractor software applications. Customized run files from the previous version will have to be adapted beforehand for additional fees."CNY

5000-1404Plate Cartridge 110V, VTX2CNY

5000-1277Top Housing W LID, DML2CNY

5050-1029Mouse, PC System spareCNY

5025-1011Expand 4 Pipettor 240VCNY

9240747Belt, Reagent Pump 117 groove, APCNY

9240720Cable Carrier, Tubing, Dispense Head, APCNY

9240700Tubing, Waste, 1 1\4", APCNY

9243690DML Luminometer, Repair FeeDML Repair Fee covers Regional Repair Center service for non-service agreement covered DML 2000 ａnd DML 3000 units. Includes labor, parts ａnd shipping materials.CNY

9243652Comprehen Valid., QuantiPlex/QP Hyres"""The Comprehensive Validation Support plan specific to a laboratory＇s needs will incorporate all of the requirements for the internal validation guidelines from the FBI＇s Quality Assurance Standards (QAS).

The Comprehensive Validation Support service includes all travel ａnd labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, ａnd amplify the validation study samples ａnd may require multiple individuals. Usually, two weeks is required to analyze the data ａnd one week to write the final report. The expected time period to complete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.

Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform ａnd complete all extractions, quantifications, amplfications, ａnd capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation. 

Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation.  Non-QIAGEN chemistry ａnd accessories are not included ａnd should  be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) ａnd required substrates (swabs, materials, etc).   For planning purposes ａnd to ensure a smooth process, the Customer is expected to have all materials on-hand ａnd inventoried one (1) week prior to the validation start date.

Data Analysis – The Comprehensive Validation Support plan encompasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via e-mail) any validation data requested after the on-site visit. A QIAGEN specialist will complete all of the data analysis produced from the validation study design. This includes qPCR (quant) ａnd STR (amp) analysis ａnd linkage to starting samples.

Validation data CD/flashdrive – QIAGEN will review the validation data ａnd draft a validation summary document, ensuring compliance with the FBI＇s QAS requirements/standards. QIAGEN will send validation data in an electronic format (email/CD/flashdrive) to the laboratory. The laboratory is responsible for final compilation, any format change preferences, review ａnd signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating compliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.

Post-validation QIAGEN-to-Laboratory Transfer – Following completion of the validation ａnd generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager ａnd the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """CNY

6000-3101Rapid Capture SystemCNY

19134QIAGEN Proteinase KCNY

614033careHPV Test, SFDA (24-test)CNY

274203flocktype IBDV Ab (5)CNY

270803cattletype MAP Ab (5)CNY

280303cador BVDV RT-PCR Kit (24)CNY