推薦：Silicate (Silicic Acid) Test@2024資料文獻(xiàn)已更新

屬性
特殊分析物
silicate

質(zhì)量水平
100

measuring range
0.3-10 mg/L (Si)

相容性
for use with MQUANT®

detection method
colorimetric

儲存溫度
15-25°C

說明
一般描述
方法：使用比色盤比色 0.3 - 0.6 - 1.0 - 1.5 - 2 - 3 - 5 - 7 - 10 mg/l Si MQuant®
The MQuant® Silicate (Silicic Acid) test (formally MColortest®) can be used for the determination of silicate e.g. in:
Groundwater, surface water, ａnd seawater
Drinking water ａnd mineral water
Industrial ａnd process water
Boiler water ａnd boiler feed water
Wastewater ａnd percolating water

Method
In sulfuric solution silicate ions react with molybdate ions to form a yellow heteropoly acid. This is reduced to silicomolybdenum blue. The silicate concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color fields of a color disk. The test evaluates the color reaction based on the transmitted light method. So even turbid ａnd colored water samples can be analyzed without further preparation.
The color disk is made of very durable, lightfast plastic, thus suitable for industrial areas ａnd wet environments.
Using the refill pack 1.18323 containing all the reagents, the original test kit can be used for a very long time, making it a particularly economical ａnd ecological system.
法律信息
MCOLORTEST is a registered trademark of Merck KGaA, Darmstadt, Germany
MQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany