產品展示
PP增硬防收縮耐熱母粒
點擊次數：12發布時間：2018/12/4 16:57:24
更新日期：2025/3/17 14:12:39
所 在 地：中國大陸
產品型號：
相關標簽：PP增硬防收縮耐熱母粒
優質供應
詳細內容
PP增硬防收縮耐熱母粒
本產品主要應用于hdpe，pp工程塑料注塑制品，使制品表皮光潔，無凹凸痕，改善注塑件由于冷卻造成收縮不均勻的問題，減少收縮變形，提高尺寸穩定性，尤其是針對高精度塑料制品有顯著作用。可通做成產品后產品拿去130高溫烘半小時不變型，不收縮。目前市場上很多注塑廠家在注塑產品時，成型時產品出現不同程度收縮，從而影響制品品質。對注塑不是很了解的人都知道這是模具的問題或是原料收縮率大的問題。因為模具復雜，注塑壓力在模腔內必然會減少，在復雜型腔內由于壓力不夠加上物料冷卻時的收縮，必定會使制品出現縮水、收縮變形等問題。如果這時去改模具，另開一套模的成本也很大，況且開了模后也不知能不能解決問題。添加防收縮劑，利用它在注塑型腔內膨脹就可以解決縮水、收縮難題。傳統收縮劑雖起到抗收縮作用，但制品表面起花紋，影響觀感，我司防收縮劑不但能起到抗收縮的作用，而且不影響制品表面光潔度，不影響制品其他物理性能。
應用特點：
1.與樹脂相容好，降低分子間摩擦力，縮短生產周期成品率高。
2. 根據塑料制品的厚度來調整用量，方能發揮*佳效果，一般添加量在2%-4%。
3. 本品不影響塑料制品的各種物性指標，同時對顏色亦無影響,表皮光潔。
4. 可以提高PP制品的抗沖擊和提高熱變形溫度。
5. 本品屬于環保產品，無毒，無害。通過FDA食品認證。
6. 產品包裝：25千克/袋。PP hardening shrinkage - resistant masterbatch
This product is mainly used in hdpe, pp engineering plastic injection molding products, make the product skin smooth, no bump marks, improve injection molding parts due to cooling caused by uneven shrinkage, reduce shrinkage deformation, improve dimensional stability, especially for high-precision plastic products have a significant effect. Can be made into a product after the product is taken to 130 high temperature bake for half an hour without deformation, shrinkage. At present, many injection molding manufacturers in the market in injection molding products, molding products appear different degrees of shrinkage, thereby affecting the quality of products. People who don＇t know much about injection molding know that this is a mold problem or a big shrinkage of raw materials. Because the mold is complex, injection pressure in the mold cavity will inevitably reduce, in the complex cavity due to insufficient pressure ａnd material cooling shrinkage, it will make products shrink, shrinkage deformation ａnd other problems. If you change the mold at this time, the cost of opening another set of mold is also very large, ａnd after opening the mold also do not know whether it can solve the problem. Add anti - shrinkage agent, using it in injection molding cavity expansion can solve shrinkage, shrinkage problems. Although the traditional shrinkage agent plays an anti-shrinkage role, but the surface of the product decorative pattern, affect the look ａnd feel, I division I anti-shrinkage agent can not only play an anti-shrinkage role, ａnd does not affect the surface finish of the product, does not affect the other physical properties of the product.
Application features:
1. Good compatibility with resin, reduce friction between molecules, shorten production cycle ａnd high yield.
2. According to the thickness of plastic products to adjust the dosage, can play the best effect, the general amount of addition in 2-4%.
3. This product does not affect all kinds of physical properties of plastic products, nor does it affect the color, ａnd the skin is smooth ａnd clean.
4. The impact resistance ａnd thermal deformation temperature of PP products can be improved.
5. This product belongs to environmental protection product, non-toxic ａnd harmless. FDA food certification.
6. Product packaging: 25kg/bag.
