LDA型電動單梁起重機是在“LD”的基礎上進行設計改進的，較“LD型”具 有結構合理，整機剛性強的特點。本系列起重機所配電動葫蘆有兩種型號:CD1型,起升速度8m/min;MD1型為雙葫蘆,起升速度為8m/min和0.8m/min，是一種輕小型的起重機機械,其起重量為1t-10t。跨度為7.5-22.5m，工作級別為A3-A5，工作環境溫度為-25-40oC。
　　本系列起重機適用于金工車間,裝配車間,維修車間和各類倉庫及其它場合,也可用于冶金,鑄造車間作輔助吊運.考慮防風,防雨要求并改進設計后,也可用于露天場合.本系列起重機均使用三相380V,50Hz電源.
本系列起重機不太適合以下工作環境.
A,有爆炸危險和火災危險的環境.
B,相對濕度大于85%的場所和充滿腐蝕性氣體的環境
C,吊運熔化金屬,有毒產品和易燃易爆物品.
　　本產品設有地面和操作室兩種操作形式。 操縱室有開式、閉式兩種，可根據實際情況分為左或右面安裝兩種形式，入門方向有側面及端面兩種，以滿足用戶在各種不同需要的情況下進行選擇。

LDA electric single beam crane

LDA type electric single beam crane is designed ａnd improved on the basis of "LD". Compared with "LD", it has the characteristics of reasonable structure ａnd strong rigidity of the whole machine. This series of cranes are equipped with two types of electric hoist: CD1 type, lifting speed of 8m/min; MD1 type for double hoist, lifting speed of 8m/min ａnd 0.8m/min, is a light ａnd small crane machinery, its lifting weight is 1t-10t. The span is 7.5-22.5m, the work grade is A3-A5, ａnd the working environment temperature is -25-40oC.

This series of crane is suitable for metalworking workshop, assembly workshop, workshop ａnd warehouse ａnd other places, but also can be used for metallurgy, as auxiliary hoisting foundry. Considering the wind, rain ａnd improved design, also can be used in outdoor occasions. This series of crane use three phase 380V, 50Hz power supply.

This series of cranes is not suitable for the following working conditions

A, explosive ａnd dangerous fire conditions

B, places where relative humidity is greater than 85% ａnd corrosive gas conditions

C transport of molten metals, toxic products ａnd flammable ａnd explosive materials

This product has two operating modes: ground ａnd operating room. There are two types of control room, closed type, according to the actual situation can be divided into the left or right of the installation of two forms, the introduction of the direction of the side ａnd end of two kinds, to meet the needs of users in a variety of circumstances to choose.