欧美三级欧美成人高清,麻豆网神马久久人鬼片,男同gay自慰网站,欧美日韩精品一区二区三区激情,在线,男人的天堂av

您的位置:易推廣 > 電工電氣 > 工控系統及裝備 > 其他工控系統及裝備 > 廣州晉宇自動控制設備有限責任公司 > 產品展示 > rogerwell產品系列 > 網關 > Modbus rtu轉BACnet/IP

產品展示

Modbus rtu轉BACnet/IP

點擊次數:21發布時間:2014/3/27 11:16:00

Modbus rtu轉BACnet/IP

更新日期:2014/3/27 11:16:00

所 在 地:中國大陸

產品型號:

簡單介紹:集成網關intesisbox把Modbus 從設備轉成BACnet/IP 控制系統,集成到Modbus RTU從站設備(冷水機組,樓宇,電表,暖氣地板,熱泵,PLC)到BACnet/IP 控制系統轉換

相關標簽:

優質供應

詳細內容

Modbus rtu轉BACnet/IP

IntesisBox is a BACnet IP client device allowing to read/write points of other BACnet IP device(s) connected to a BACnet network,

and offering these point"s values through its Modbus interface. BACnet interface of IntesisBox supports reading of other BACnet

devices by continuous polling or by subscription requests (COV). All the updated readings are maintained in IntesisBox memory

ready to be served to Modbus when requested.
After the start up process, IntesisBox listen for any read or write request received from Modbus system. If it is read request,

IntesisBox serves the updated point"s values in its memory. If it is a write request, performs the writing of the remote BACnet

 device"s point associated immediately. Modbus interface of IntesisBox supports Modbus TCP or Modbus RTU (RS232 or RS485), software

 configurable, and acts as a Modbus slave device.
 IntesisBox配置
IntesisBox Modbus Server series are configured using LinkBoxMB, a software tool for windowsTM which is supplied along with the purchase

 of IntesisBox with no additional cost. With the standard installation of LinkBoxMB, a Demo project for integration of BACnet devices is

also installed, using this demo project makes the engineering needed for this integration easy and quick, almost plug&play.

 

IntesisBox capacity

 

There are three different versions of IntesisBox® Modbus Server - BACnet/IP Client with different capacity every one of them.
 Tiny version with capacity of 100 points and 1 BACnet/IP device.
Ref.: IBOX-MBS-BAC-100.
 Basic version with capacity of 500 points and 1 BACnet/IP device.
Ref.: IBOX-MBS-BAC-A.
 Extended version with capacity of 3000 points and 16 BACnet/IP devices.

 

簡單的應用

Integration of any BACnet/IP device into Modbus control systems.

 

典型應用

Integration of Daikin VRV Air Conditioners into a Modbus enabled control system (BMS, PLC, SCADA, Controller…).
For this application, Daikin VRV Air Conditioning system must be equipped with Daikin BACnet gateway (model DMS502B51),

this Daikin gateway is normally commissioned by Daikin technical personnel, contact your nearest Daikin distributor for details.
In the technical documentation of IntesisBox supplied with the device, extended details on how to configure IntesisBox for

this application is provided.
Intesis Software provides sample projects for IntesisBox with specific configuration to integrate Daikin VRV system, with these

sample projects the configuration and commissioning of IntesisBox for this application becomes easy and quick, almost plug & play.

 

 

 

 

功能支持

 Modbus functions 03 and 04 (read holding registers and read input registers) can be used to read Modbus registers.
 Modbus functions 06 and 16 (Single Multiple Holding Registers and Write Multiple Holding Registers) can be used to

write Modbus registers.
 If poll records are used to read or write more than one register, it is necessary that the range of addresses requested

 contains valid addresses, if not the corresponding Modbus error code will be returned.
 Modbus error codes are fully supported, they will be sent whenever a non valid Modbus action or address is required.
數據格式

The Modbus registers can be of 2 bytes (16 bits) or of 4 bytes (32 bits).
 For 2 bytes (16 bits) registers, its content is expressed always in MSB..LSB.
 For 4 bytes (32 bits) registers, its content (the way IntesisBox handles the byte order) can be one of 3 different options,

configurable, this has been implemented to avoid problems reading 32 bits registers, because Modbus master systems handle

differently byte order of 32 bits registers depending on manufacturer/device.


Modbus RTU
 Baud rate can be selected from 1200, 2400, 4800, 9600, 19200, 38400 and 56700. (Data Bits: 8, parity: , Stop Bits: 1).
 Modbus slave number can be configured. Physical connection (RS232 or RS485) can also be selected.
 Only the lines RX, TX and GND of the RS232 connector are used (TX/RX+ and TX/RX- for RS485).
Modbus TCP
 The TCP port to use can be configured (by default 502 is used).
 The IP address, subnet mask and default router address to use by IntesisBox can be also configured.
Address Map
The Modbus address map is fully configurable, any point in the IntesisBox can be freely configured with the desired Modbus register address.

 

聯系我們

聯系人:鄒小姐

點擊查看聯系方式

企業檔案

  • 會員類型:免費會員
  • 工商認證: 【已認證】
  • 最后認證時間:
  • 法人:
  • 注冊號:
  • 企業類型:代理商
  • 注冊資金:人民幣萬

script>
在線咨詢

提交