性能指標：

1．Fully computer controlled。

完全由計算機控制。

2．E9Screen software for automatic selftest and calibration。

具有自檢和自動校準功能的軟件。

3．Software controlled holding potential with a total range of +/- 1 V

軟件控制保持電壓范圍為+/-1V

4．Automation of experimental procedures

自動控制實驗過程。

5．Automatic or manual adjustment of Cfast and Cslow.

自動或手動調節快電容和慢電容補償。

6．Automatic or manual adjustment of the pipette offset in a range of +/- 200 mV

自動或手動調節+/-200mV范圍內的毛細管偏移。

7．Automatic or manual Leak subtraction

自動或手動減少漏電流。

8．possibility of full manual control of the amplifier

完全可以手動控制放大器。

9．Improved headstage design to reduce noise levels

改良的探頭設計大大減少噪聲水平。

10．Additional amplification range for large currents (up to 2 µA)

另外擴大的電流范圍可達到2 μA。

11．Variable, high-quality hardware filters

可調節的高質量的濾波器

12．Instant automatic neutralization of leakage currents, capacitance, and series resistance

即時自動中和漏電流，電容，串聯阻抗。

13．Integrated A/DA interface minimizes the total recording noise

良好的A/D模數/數模轉換接口卡將記錄噪聲減到*小。

14．Integration of hardware and software eliminates compatibility problems

配套的軟硬件消除了是否兼容的問題。

15．True noise measurements from 100 Hz to 15 kHz

從100HZ到15KHZ實噪聲測量 。
16．Suitable for single-channel and whole-cell measurements, loose patch experiments, capacitance measurements, recordings from plant cells and organelles, and studying reconstituted channels in artificial membranes