產品展示
CEDAR側氣動及油壓工具
點擊次數：141發布時間：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
所 在 地：
產品型號：DI-4B-25
相關標簽：思達扭力工具
優質供應
詳細內容
| Management of air tool / oil pulse tool |
| ●Torque Tester DI-4B-25 |
  |
| For Daily Torque measurement of a small impact Tool, Air screw Drivers ａnd High Torque Electric drivers DI-4B-25 - Up to MAX. 25 N.m （250 kgf.cm） - With Blow Counter for Impact Tools. - High Luminous LED Display for high visibility in dark place |
| Specification | DI-4B-25 | |||
| Measuring range | 0.30～25 N?m 3.0～250 kgf?cm 3.0～220 lbf?in | |||
| Operative Measuring Range at P-D Mode | 0.70 - 25 N.m 7.0 - 250 kgf.cm 7.0 - 220 lbf.in | |||
| Accuracy | ± 0.5% （in case of reading 499 or less = last digit +/- 3 reading） | |||
| Display | Torque Meter | LED Digital Display, 4 digits | ||
| Blow Counter | LED Digital Display, 2 digits （Displayed only in P-P mode） | |||
| Measureing Direction | CW, CCW selectable with a Switch | |||
| M＇ment Mode | P-P Peak | Holding Peak Load Value | ||
| T-R Track | Showing Real time torque value （ Used for Zero-Adjustment ） | |||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||
| Blow Counter | Count Range | Zero to 99 blow | ||
| Count Time | 0.1 - 9.9 seconds | |||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button | |||
| Data output | Serial Interface RS232C （Baud rate: 9600） | |||
| Power Supply | Battery | Ni-Cd Chargeable Battery 1.2V x 5 cells （700mAh） | ||
| Automatic PW off | Automatically power off after 5 minutes left without operation | |||
| Charging time | Within 6 hours | |||
| Continunous working time | 8 hours | |||
| Battery Life Time | Chargeable more than 300 times | |||
| Weight | 2.1kg | |||
| Dimension | 150（W） x220（D） x74 （H） | |||
| Accessories （one piece each） | Bit Socket （ 6.35 HEX - Subtense 17mm ） | |||
| Measuring Joint : Hard Type （M10） & Soft Type （M10） | ||||
| Socket for Wrenches （ Subtense 17mm ） | ||||
| Dedicated AC/DC Adaptor （Charger）, 230VAC or 120VAC- DC 7.5V 120mA Output | ||||
| Exclusive receipt case | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Attachment About the method of application of an attachment | |
 | Soft joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 3 turns before reaching max. torque （torque to be measured） after Nut or Bolt reaches to the surface of the fastened objects. For elastic body. |
 | Hard joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 1/10 turns before reaching max. torque （torque to be measured） after Nut or Bolt reaches to the surface of the fastened objects. For hard body. |
