產品展示

CEDAR扭力測試儀

點擊次數：114發布時間：2009/11/2 0:00:00

更新日期：1900/1/1 0:00:00

所在地：

產品型號：DIS-IP05

簡單介紹：日本CEDAR扭力測試儀

相關標簽：扭力測試儀 日本思達扭力工具

優質供應

詳細內容

TORQUE TESTER 　DIS-IP series

Management of various torque wrench torque drivers
A new function is carried
（1） Display Board Became Legible.
　（A Measurement mode ａnd a unit. Other coded data is　displayed.）
（2） Fault charge protection loading. It is pilot-lamp lighting during charge.

Indicatort ａnd Detector dissociate.
Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc.
It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role.

Abundant variations.
Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management.

A Display screen became large. It is very legible
Even from the distant place, a numerical check is easy.

The main features
□ Yes-no decision　
□ Average calculation
□ Data storage is 800 affairs.
□ A convenient functional setup of a setup of a measurement start value etc.
□ Data output at real time （every about 1/180 seconds）.　
□ USB terminal data output

□It is a rechargeable battery drive, the installation to the spot is also easy.
□By the auto power OFF, It prevents forgetting to turn off the power.
□One-touch zero adjustment
□An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up.
　　It is very convenient for a continuous check.
□The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）.

Specification		DIS-IP05	ＤIS-ＩＰ5	ＤIS-ＩＰ50	ＤIS-ＩＰ200	ＤIS-ＩＰ500
Measuring range （at time of Track）		2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in	0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% （499 or less digit±3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （right ａnd left）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, ａnd the average value		Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat （Baud rate :19200）
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Code length		Standard 1m （there are automatic machines no less than 4m as an option.）
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ（Three division）	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　（Socket intuition affinity）	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ