產品展示
CEDAR扭力工具
點擊次數：68發布時間：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
所 在 地：
產品型號：DIS-RL05
優質供應
詳細內容
| Separate type merit! Detection part is compact. | |
 | DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was small ａnd a light weight, minute torque measurement which needs prudence for handling was enabled. |
 | DIS-RL2 Measurement to 2N?m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N?m | |
| A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions （DIS series） □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0～500 mN?m 0.020～5 kgf?cm 0.020～4.5 lbf?in | 0.020～2 N?m 0.20～20 kgf?cm 0.20～17.4 lbf?in | 0.20～6 N?m 2.0～60 kgf?cm 2.0～54lbf?in | |||
| Accuracy | ±0.5% （or less 499±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A top ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. （0.5 - 3.0 sec） | |||||
| One-touch zero | A clear button is pushed ａnd it is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×4cells 450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | Φ4 | HEX 6.35 | ||||
| Accessories （one piece each） | Φ4 bits （＋） ?0/?1 | 6.35HEX bits （＋） ?1/?2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
