產品展示
CEDAR扭力工具
點擊次數：77發布時間：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
所 在 地：
產品型號：DIS-IPS5C
相關標簽：扭力測試儀 思達扭力工具
優質供應
詳細內容
| Measurement of bolting machines |
| ● TORQUE TESTER DIS-IPS |
 |
| Performance check of an electric driver Management of the bolting torque of an automatic line A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Detection part is very a compact! The best for measurement of an automatic line OW join. it rewinds at ａnd is needlessness. Disply screen became large. It is very legible .It became large 1.5times. Various attachments are attached. Measurement is possible,with a bit attached. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output |
| DIS-IPS | ||||
| Specification | DIS-IPS20C | DIS-IPS5C | ||
| Measuring range | 0.20～20 N?m 2.0～200 kgf?cm 2.0～174 lbf?in | 0.020～5 N?m 0.20～50 kgf?cm 0.20～45 lbf?in | ||
| Accuracy | ±0.5% （499 or less digit±3digit） | |||
| Display | The 4 figures digital display of LCD | |||
| The measurement direction | CW-CCW （right ａnd left） | |||
| Measuring mode | P-P Peak | Peak load value hold. | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword. | |||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||
| Decision function | Setting of torque value | A maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button | |||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | ||
| Data memory | 800 data stored | |||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||
| Auto power save | 10 minutes no use, automatically switch off. | |||
| Charging time | From empty - about 3hours | |||
| Continunous working time | 12 hours | |||
| Attachment fit mouth | □20ｍm | |||
| Meter outside type dimension | 100（W）×105（D）×33（Ｈ） | |||
| Weight | Meter part 520g | |||
| Attachment | Fixed Attachment □20㎜ M4/M5/M6/M8 | |||
| OW joint OW-20 | OW joint OW-10 | |||
| Accessories （one piece each） | AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.） | |||
| An inspection report, a proofreading certificate, a traceability system figure | ||||
