產品展示
日本CEDAR數顯扭力起子
點擊次數：95發布時間：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
所 在 地：
產品型號：DID-4
優質供應
詳細內容
| Screw tightening control |
| ● DIGITAL TORQUE DRIVER DID-4M |
  |
| （1） Unify the display section ａnd a frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple |
| *The torque screwdriver is Ergonomic ａnd light weight, yet ruggedly constructed *Available in: lb-in, kg-cm ａnd N-m *Peak, Real Time ａnd Peak Down measuring mode （selectable） *800 data memory. *Programmable High ａnd Low set points with both audible beep ａnd Green/Red LED indicator for uniform torque tightening or GO/NO GO testing *Programmable screw tightening counter *Programmable Auto Zero function resets unit to zero for easy operation *Both CW ａnd CCW operation *ASCII format output（USB） *Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use * AC charger ａnd carrying case included. |
| Specification | DID-4 | ||
| Measuring range | 0.020 - 4 N-m | ||
| 0.20～40 kgf-cm | |||
| 0.20～35 lbf-in | |||
| Accuracy | ± 0.5% （in case of reading 499 or less = last digit +/- 3 reading） | ||
| Display | The 4 figures digital display of LCD | ||
| The measurement direction | CW-CCW （right ａnd left） | ||
| Measuring mode | P-P Peak | Holding Peak Load Value | |
| T-R Track | Showing Real time torque value （ Used for Zero-Adjustment ） | ||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | ||
| C Real-time output | Load torque value is outputted every about 1/ 160. | ||
| Decision function | Setting of torque value | Programmable High ａnd Low setpoints with both audible beep ａnd Green/Red LED indicator for uniform torque tightening or GO/NO GO testing | |
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | ||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） When outputting data,the cable（USB miniB） is needed. | |
| Data memory | 800 data / ten channels data | ||
| A setup of the number of counts | One to 99 count （count in a direction with a bundle） | ||
| Power supply | Ni-Cd chargeable battery 1.2V×4cells 600mAh | ||
| Auto power save | 10 minutes no use, automatically switch off. | ||
| Charging time | From empty - less than 5hours | ||
| Continunous working time | 12 hours | ||
| Bit /Socket part | HEX6.35 | ||
| Weight | about 400g | ||
| Attachment | Bit （＋）�。＃薄。＃病� | ||
| Accessories （one piece each） | Dedicated AC/DC Adaptor （Charger）,100～230VAC | ||
| An inspection report, a proofreading certificate, a traceability system figure | |||
