產品展示
日本思達（CEDAR）扭力測試儀
點擊次數：290發布時間：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
所 在 地：日本
產品型號：DI-12
相關標簽：扭力測試儀
優質供應
詳細內容
 |
The trap of management of torque
When it is going to bolt a screw by a power driver etc., output torque is inspected by the torque tester for power drivers.
This is required for the performance management of a power driver.
However, this value is not a torque value which is a value which shows the output of a driverhas become tight.
Managing torque truly is managing "the torque value of the actually tightened screw."
However, the tester which measures "the torque value of the actually tightened screw" till today did not exist.
I manufactured this machine in order to solve it.
- The check of "the torque value of the actually tightened screw" by a user''s product random inspection
- Ask for the relation between "the value of a torque circuit tester","the torque value of the actually tightened screw". The output torque of a power driver is set upmanaged.
SLIP TORQUE DETECTOR DI-12
DI-12-SL4 Measuring range 0.030 - 4 N丒m
For the screws of M2.5 - M5
(Torque within measuring range)DI-12-SL02 DI-12-SL15 Measuring range 1.5 - 200 mN丒m
For the screws of M2 or less
(Torque within measuring range)Measuring range 0.30 - 15 N丒m
For the screws of M6 - M8
(Torque within measuring range)
丂丂
Measuring method
Change of the point which increases, performs a bundle examinationis slid from a firm point is caught,a torque value is judged.
Smooth bundle lump work is done by motor drive.
A motor is stopped if it judges. It increasesmany exaggerated torque to a bundle examination is prevented. It loosens,fastens at the time of torque inspection,there is no necessity for repair work.
丂丂丂丂Specification
| Form | DI-12-SL4 | DI-12-SL02 | DI-12-SL15 | ||
| Operating range | 0.030乣4.000丂N丒m丂 | 1.5乣200.0丂mN丒m | 0.30乣15.00丂N丒m | ||
| accuracy | 亇1% (500 or less digit亇5digit) | 亇0.5% (200 or less digit亇1digit) | |||
| Display丂 | The 4 figures digital display of LCD | ||||
| The measurement direction | CW-CCW (rightleft)A display will be the display of only an absolute value. Load of + (the CW direction)- (the direction of CCW) is carried out to a data output. | ||||
| Measure-ment Mode | P-P(peak) | The peak load value hold.Destructive torque (the CW direction) －－ it loosenstorque (the direction of CCW) is measured. | |||
| T-R(truck) | A display changes with load change. | ||||
| PD judging mode | The judgment of slide torquethe judgment of the yield point are performed. (Only the CW direction) | ||||
| Detection judging | If a slide torque value is detected, you will be told about by green lamp lighting.(at the time of RG mode) | ||||
| Measurement start value setup | The value which starts measurement (start of judgment operation) is set up. ( 0.001 N-m unit from 0 N-m) | ||||
| Continuation data output | A load torque value is outputted for every fixed time during measurement in RG mode. By creating a torque wave, loci, such as slide torque, yield point torque,destructive torque, can be judged. | ||||
| Auto-power-off | Automatically power off after 5 minutes left without operation | ||||
| Bit plug form | HEX丂6.35 | fai 4丂 | 6.35sq | ||
| Data output | ASCII format丂(baud rate 9600). A measurement result is outputted. | ||||
| Outside dimension | Detector | fai 44亊190丂Other projection thing | fai 20亊145丂 | fai 55亊270丂 | |
| Indicator | 166(W)亊142(D)亊48(H) | ||||
| Weight丂 | Detector | About 820g丂 | About 80倗 | About 1.5k倗 | |
| Indicator | About1kg | ||||
| Accessories (one piece each) | Bit丂亄丂#1丂#2 | Bit丂亄丂#0 | |||
| An inspection report, a proofreading certificate, a traceability system figure | |||||
