產品展示
日本思達（CEDAR)扭力起子
點擊次數：297發布時間：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
所 在 地：日本
產品型號：DIS-RL05
相關標簽：
優質供應
詳細內容
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
 | DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
 | DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
