產品展示

日本思達電批扭力測試工具

點擊次數：221發布時間：2009/11/2 0:00:00

更新日期：1900/1/1 0:00:00

所在地：日本

產品型號：CD-100M

簡單介紹：見詳細說明

相關標簽：電批扭力測試儀

優質供應

詳細內容

Management of electric screw driver

仠Torque Meter 丂CD-100M/10M

upgrade丂The main changed parts

(1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display.
(2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc.
(3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily.
(4) Calculation of Maximum, Minimum,Average Became Intelligible.
(5) The call of the saved data became easy. The output of data also became intelligible.
(6) Fault charge protection. It is pilot-lamp lighting during charge.
(7) Data Output is USB Form (B Type).
(8) Memory Data are 800 Affairs
(9) Real-time Output is Every 1 / 180 Seconds.

Specification	CD亅100M	CD亅10M
Measuring range (at the time of Track)	0.10乣10丂N丒m	1.0乣100丂們N丒m丂
	1.0乣100 kgf丒cm	0.10乣10 kgf丒cm
	1.0乣90 lbf丒in	0.10乣9 lbf丒in
Accuracy	亇0.5亾乮F/S乯(199 or less digit亇1digit)
Display	The 3.5 figures digital display of LCD
The measurement direction	CW-CCW (rightleft)
Measurement Mode	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
Highlow limits judging function	Highlow value are measurement within the limits,can be set up.
Real-time Output	Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum,the average value display	The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels.
Automatic Clearance	Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero	A clear button is pushedit is a zero.丂 Data is outputed.
Data output	ASCII format (baud rate 19200)
Power supply	Ni-Cd chargeable battery 1.2V亊5cells 700mAh
Auto power save	10 minutes no use, automatically switch off.
Charging time	About 3 hours
Continunous working time	About 12 hours
Socket fit mouth	仩 20mm/ 仩9.5mm
Weight	Abbreviation 1 kg
Outside dimension	160乮W乯亊125乮D乯亊55乮H乯
Attachment	Measurement joint丂SJ50/SJ10K	Measurement joint丂SJ10
Accessories (one piece each)	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, traceability system figure

SJ50	SJ10	About an adapter 亙measurement joint丂SJ乮PAT.P乯亜
		It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort.