產品展示

日本思達(CEDAR)扭力測試儀

點擊次數：327發布時間：2009/11/2 0:00:00

更新日期：1900/1/1 0:00:00

所在地：日本

產品型號：DI-4B-25

簡單介紹：見詳細說明

相關標簽：數顯扭力測試儀

優質供應

詳細內容

Management of air tool / oil pulse tool

仠Torque Tester 丂DI-4B-25

丂丂丂

For Daily Torque measurement of a small impact Tool,
Air screw DriversHigh Torque Electric drivers

DI-4B-25
- Up to MAX. 25 N.m (250 kgf.cm)
- With Blow Counter for Impact Tools.
- High Luminous LED Display for high visibility in dark place

Specification		DI-4B-25
Measuring range		0.30乣25 N 丂3.0乣250 kgf丒cm丂3.0乣220 lbf丒in
Operative Measuring Range at P-D Mode		0.70 - 25 N.m 丂丂7.0 - 250 kgf.cm丂丂7.0 - 220 lbf.in
Accuracy		亇 0.5% (in case of reading 499 or less = last digit +/- 3 reading)
Display	Torque Meter	LED Digital Display, 4 digits
	Blow Counter	LED Digital Display, 2 digits (Displayed only in P-P mode)
Measureing Direction		CW, CCW selectable with a Switch
M''ment Mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value ( Used for Zero-Adjustment )
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
Blow Counter	Count Range	Zero to 99 blow
	Count Time	0.1 - 9.9 seconds
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch-Zero Clearance		Easy Zero-Adjustment with pressing CLEAR button
Data output		Serial Interface RS232C (Baud rate: 9600)
Power Supply	Battery	Ni-Cd Chargeable Battery 1.2V x 5 cells (700mAh)
	Automatic PW off	Automatically power off after 5 minutes left without operation
Charging time		Within 6 hours
Continunous working time		8 hours
Battery Life Time		Chargeable more than 300 times
Weight		2.1kg
Dimension		150(W) x220(D) x74 (H)
Accessories (one piece each)		Bit Socket ( 6.35 HEX - Subtense 17mm )
		Measuring Joint : Hard Type (M10) & Soft Type (M10)
		Socket for Wrenches ( Subtense 17mm )
		Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC- DC 7.5V 120mA Output
		Exclusive receipt case
		An inspection report, a proofreading certificate, traceability system figure

Attachment丂About the method of application of an attachment
	Soft joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 3 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For elastic body.
	Hard joint Subtense 17mm This is a joint to reproduce the state to fasten a screw actually. It is designed to make about 1/10 turns before reaching max. torque (torque to be measured) after Nut or Bolt reaches to the surface of the fastened objects. For hard body.