深圳輪轉開槽機_明隆供_南京輪轉開槽機商家熱線PL-K1 輪轉開槽機PL-K1 Rotary Slotter&Scorer整機功能/GENERAL FEATYRES主機與工作臺組安裝，鏈條推入式手動送紙；壓紙、修邊、開槽、切角一次完成。開槽刀相位調整采用行星齒輪機構，電動正反360度均可微調，并附刻度盤顯示所調數據。主機采用變頻調速裝置，在0-70張/分速度范圍內實現無級調速，方便客戶使用。齒輪材質采用優質碳素結構鋼，和優質球鐵經調質及齒面高頻淬火處理，或正火處理具有較高的齒面硬度；并且齒輪潤滑方式采用淋浴式循環潤滑，改善了齒輪工作條件，減少噪音。可正反點動機器輕松快捷調機。The machine ａnd the worktable are installed integrally.Paper is pushed ａnd fed by chain manually.Pressing,trimming slotting ａnd cutting can be finished once.Phase of dike cutter is adjusted by the planet gear mechanism which can be fine adjusted within 360 degrees clockwise or antilockwise ａnd is equipped with a dial to show the adjusted data.The main machine is controlled by frequency control device.Stepless speed regulation can be achieved within the scope of0-70 sheets/minutes,which is convenient for customers.Gears are made of high quality carbon steel ａnd cast iron which are quenched ａnd tempered,and gear surface is treated by high frequency quenching or normalizing,so as to ensure high hardness.Gears are lubricated by spray type cycle lubrication which improves working conditions of gears ａnd reduce noise.The machine can be inched clockwise or anticlockwise for quick adjustment.主要技術參數/MAIN SPECIFICATIONS型號/Model15251530相當高生產速度（張/分）7070相當大進紙尺寸Max.Feeding size(mm)1430×25001430×3000相當小進紙尺寸M g size(mm)650×350650×350適應紙板厚度Suitable paperboard thickness(mm)2-112-11開槽寬度Slotting width(mm)77切角寬度Angle cutting width(mm)45mm45mm相當大槽度M depth(mm)300（可加刀）300（可加刀）相當小開縫間隙M ng size(mm)開刀Slotting type R150×150×150×150150×150×150×150反刀Slotting type L270×55×270×55270×55×270×55總功率Total power44