TEL:13910098771

The D-Link DGS-1010MP 10-Port Gigabit PoE Switch is an ideal solution for small offices ａnd enterprise environments looking to expand the network with a set of Power over Ethernet devices such as wireless access points, IP cameras, ａnd IP phones. Built with small business ａnd enterprise users in mind, the DGS-1010MP is a high-speed, flexible switch that features a fanless, quiet design so it can be conveniently placed anywhere in a working environment.

Power over Ethernet
The DGS-1010MP features eight 10/100/1000BASE-T ports that support the IEEE 802.3at Power over Ethernet (PoE) standard. Each of the eight PoE ports can supply up to 30 W, with a total combined PoE budget of 125 W, allowing users to power up to four IEEE 802.3at-compliant devices without requiring an additional power supply. This allows devices to be installed in locations without any power outlets, saving on installation costs ａnd reducing the time it takes to install new devices.

Superior Performance
The DGS-1010MP is fully plug ａnd play, meaning installation is quick ａnd easy ａnd requires no additional configuration. Support for Auto MDI/MDI-X on all ports eliminates the need for crossover cables when connecting to another switch or hub. Auto-Negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) ａnd intelligently adjusts for optimal compatibility ａnd performance. With store-and-forward switching, the DGS-1010MP also maximizes network performance while minimizing packet loss during data transmission. In addition, the DGS-1010MP features one Gigabit Ethernet ａnd one SFP uplink port for high-speed connections to remote storage or for long distance fiber connections to an uplink network. Combining the convenience of PoE, superior performance, ａnd ease of use, the DGS-1010MP is the ideal choice for flexibly expanding your network while remaining cost efficient.

General
Hardware Version
A1Size
11-inch desktop/rackmount size, 1U heightNumber of Ports
8 x 10/100/1000 Mbps PoE ports
1 x 10/100/1000 Mbps Ethernet uplink port
1 x 100/1000 Mbps SFP uplink portPort Standards ａnd Functions
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3z Gigabit fiber
IEEE 802.3at Power over Ethernet
IEEE 802.3az Energy-Efficient Ethernet
IEEE 802.3x Flow Control
ANSI/IEEE 802.3 NWay auto-negotiationSwitching Capacity
20 GbpsMedia Interface Exchange
Auto MDI/MDI-XTransmission Method
Store-and-forwardMAC Address Table
4K entries per devicePacket Buffer Memory
192 KB per devicePacket Filtering / Forwarding Rates
Ethernet
14,880 pps per port
Fast Ethernet
148,800 pps per port
Gigabit Ethernet
1,488,000 pps per portData Transfer Rates
Ethernet
10 Mbps (half-duplex)
20 Mbps (full-duplex)
Fast Ethernet
100 Mbps (half-duplex)
200 Mbps (full-duplex)
Gigabit Ethernet
2000 Mbps (full-duplex)Network Cables
10BASE-T:
UTP Cat 3/4/5/5e (100 m max.)
EIA/TIA-586 100-ohm STP (100 m max.)
100BASE-TX
UTP Cat 5/5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)
1000BASE-T
UTP Cat 5/5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)Physical
LED Indicators
Per port: activity / link ａnd speed
Per port: power / status
Per device: PoE MaxPower Input
100 to 240 V AC, 50/60 HzMaximum PoE Budget
125 W
PoE up to 30 W per portPower Consumption
7.32 W (PoE off)
133.8 W (PoE on)Temperature
Operating: 0 to 40 ^oC (32 to 104 ^oF)
Storage: -10 to 70 ^oC (14 to 158 ^oF)Humidity
Operating: 0% to 95% RH non-condensing
Storage: 0% to 95% RH non-condensingEMI
CE Class A
FCC Class A
VCCI Class A
CCC Class A
FCC Class ASafety
cUL
CB
CCC
LVD

D-Link  DGS-1010MP 10口千兆非網管POE 8個千兆PoE電口DGS-1026MP 26口千兆非網管PoE+交換機DGS-1210-52MP  40口千兆智能網管PoE+交換機Dlink路由器Dlink交換機POE交換機Dlink光纖收發器Dlink防火墻Dlink分頻器Dlink轉換器Dlink網卡Dlink無線網卡Dlink無線AP無線網橋Dlink網線Dlink水晶頭等批發TEL:13910098771