AR3050S
Firewall throughput (Raw)750 Mbps
Firewall throughput (App Control)700 Mbps
Concurrent sessions100,000
New sessions per second3,600
IPS throughput220 Mbps
IP Reputation throughput350 Mbps
Malware protection throughput300 Mbps
VPN throughput400 Mbps

Firewall

• Deep Packet Inspection (DPI) application aware firewall (built-in or Sandvine application lists) for granular control of apps ａnd IM (chat, file transfer, video)

• Application Layer Gateway (ALG) for FTP, SIP ａnd H.323

• Application layer proxies for SMTP ａnd HTTP

• Bandwidth limiting control for applications ａnd IM/P2P

• Firewall session limiting per user

• Bridging between LAN ａnd WAN interfaces

• Data leakage prevention

• Bidirectional single-pass inspection engine

• Maximum ａnd guaranteed bandwidth control

• Multi zone firewall with stateful inspection

• Static NAT (port forwarding), double NAT ａnd subnet-based NAT

• Masquerading (outbound NAT)

• Proxy-based web control by content categorisation (Digital Arts)

• Custom web control categories, match criteria ａnd keyword blocking per entity

• Security for 

  

  Run by the IPv6 Forum, the IPv6 Ready certification is intended to demonstrate conformance to IPv6 standards ａnd validate interoperability of IPv6 products.

  " data-original-title="IPv6">IPv6 traffic

• ICSA corporate firewall certification (AR4050S only)

Networking

• Routing mode / bridging mode / mixed mode

• Static unicast ａnd multicast routing for IPv4 ａnd IPv6

• DS-Lite, Lightweight 4over6, ａnd MAP-E for connecting IPv4 networks over IPv6

• Dynamic routing (RIP, OSPF ａnd BGP) for IPv4 ａnd IPv6

• Flow-based Equal Cost Multi Path (ECMP) routing

• Dynamic multicasting support by IGMP ａnd PIM

• Route maps ａnd prefix redistribution (OSPF, BGP, RIP)

• Virtual Routing ａnd Forwarding (VRF-Lite)

• Traffic control for bandwidth shaping ａnd congestion avoidance

• Policy-based routing

• SD-WAN: performance measure ａnd load balance WAN links

• UTM Offload improves WAN throughput when using multiple security features together, or when higher performance is required

• PPPoE client with PADT support

• DHCP client, relay ａnd server for IPv4 ａnd IPv6

• Dynamic DNS client

• IPv4 ａnd IPv6 dual stack

• Device management over IPv6 networks with SNMPv6, Telnetv6 ａnd SSHv6

• Logging to IPv6 hosts with Syslog v6

• Web redirection allows service providers to direct users to a specified web address

• URL-offload enables cloud-based traffic (e.g. Office 365) to be sent directly to the Internet

• LLDP ａnd LLDP-MED for network discovery

Allied Telesis   AT-GS970M/18PS-R  16 Ports  Manageable  Layer3安奈特網絡交換機Allied Telesis  AR3050S  AT-AR3050S  安奈特UTM型防火墻(2xGE WAN 端口和 8 X 10/100/1000M)批發AT安奈特快速以太網轉換器AT安奈特媒體轉換器AT安奈特介質轉換器AT安奈特協議轉換器AT安奈特光電轉換器AT安奈特光纖收發器AT安奈特網絡交換機AT安奈特光纖交換機AT安奈特路由器AT安奈特防火墻AT安奈特無線AP控制器AT安奈特無線網橋批發Allied Telesyn 安奈特全線工業級網絡設備批發

AT-MMC200/SC/ST/LC AT-MC104LH安奈特快速以太網媒體轉換器批發

AT-MMC2000/ST/LC/SP  AT-MC606安奈特快速以太網媒體轉換器批發

AT-MMC2000/SC   AT-MC1004   AT-MC1008  1000Base-T to 1000Base-SX/SC安奈特快速以太網媒體轉換器批發

AT-MMC2000/SC   AT-MC1004   AT-MC1008  AT-MMC2000/ST/LC/SP   AT-MMC200/SC/ST/LC  AT-MC605  AT-MC606  AT-FS232   AT-MC101XL/MC102XL/MC103XL/MC104XL   AT-MC101LH/MC102LH/MC103LH/MC104LH等Allied  Telesis  Transceiver安奈特交換機Allied  Telesyn  安奈特路由器,光纖收發器,介質轉換器,無線網絡,網絡管理等Allied  Telesyn  安奈特全線網絡設備批發

AT-MMC2000/SC   AT-MC1004   AT-MC1008  AT-MMC2000/ST/LC/SP   AT-MMC200/SC/ST/LC  AT-MC605  AT-MC606  AT-FS232   AT-MC101XL/MC102XL/MC103XL/MC104XL   AT-MC101LH/MC102LH/MC103LH/MC104LH等Allied  Telesis  Transceiver安奈特交換機Allied  Telesyn  安奈特路由器Allied  Telesyn  安奈特介質轉換器Allied  Telesyn  安奈特無線網絡Allied  Telesyn  安奈特網絡管理等Allied  Telesyn  安奈特全線網絡設備批發

AT-FS232系列百兆介質轉換器模塊可通過光纖連接遠距離的 LAN設備，從而擴展以太網絡的覆蓋范圍，并能通過簡潔的管理降低運營成本。AT-FS232系列模塊具有多種型號，可支持多模和單模光纖，***遠距離可達100公里。AT-FS232系列模塊與IEEE標準兼容，因此這些介質轉換器模塊可以和其它基于IEEE標準的介質轉換器、交換機、光纖適配器卡等光纖傳輸設備協調工作。

擴展以太網的覆蓋范圍

AT-FS232系列快速以太網介質轉換器實現將10BaseT或100BaseT RJ45雙絞線端口轉換到100FX光纖端口，可以平滑連接速率不同的10M以太網和100M快速以太網。根據具體型號不同，AT-FS232系列可支持多模或單模光纖，傳輸距離可達100公里，還可支持雙工、半雙工等工作方式。

靈活部署

AT-FS232系列介質轉換器具備獨立的外置電源，既可以獨立工作，也可以安裝在可配置冗余電源的專用機箱中，或通過配件安裝于墻面。

VLAN支持

AT-FS232支持VLAN的工業標準IEEE 802.1Q規范。該規范對標準以太網幀結構進行了修改，導致數據幀尺寸大為增加。AT-FS232在設計上完全兼容這些超長數據幀傳輸，完全適用于現代以太網絡。

Link Test、MissingLink^TM和Smart MissingLink^TM功能

Link Test

Link Test可用于快速方便地測試介質轉換器端口與與對端終端節點間的連接狀態。如果網絡出現問題，就可以執行鏈路測試（Link Test）來判斷哪個端口出現了問題，從而對存在問題的線纜或終端節點進行故障診斷處理。

MissingLink^TM（ML）

MissingLink^TM功能可以在介質轉換器的端口間傳遞它們的“鏈路”連接的狀態，當介質轉換器檢測到與一個終端節點的連接丟失時，介質轉換器就會將該模塊另外一個端口的連接關閉，這樣可以讓對端節點知道該鏈路已經中斷。

Smart MissingLink^TM（SML）

Smart MissingLink^TM功能除具有和Missing Link^TM完全一樣的功能外，還有一個特性，當某端口上的鏈路丟失后，除了執行Missing Link^TM功能外，另一個連接正常的端口的鏈路狀態LED還會開始閃爍。此功能可以讓網絡管理人員快速判斷哪個鏈路仍舊是正常的（LNK LED閃爍），哪條鏈路真正中斷了（LNK LED熄滅）。

TEL:13910098771