在介紹機械表偷停的原因之前，我們先簡單了解一下什么是手表偷停。手表偷停就是在動力充足的情況下，手表不走了，或者停走了過一會又自己開始走動。

　　Before introduce mechanical watch steal stop reasons, we first introduce simple what is a stop watch stolen. Stop watch stolen is under the condition of the power is enough, watch doesn＇t work, or stop myself began to walk away again later.

　　機械表偷停主要有以下幾點原因：

　　Mechanical watch stolen stopped basically has the following reasons:

　　手表停擺：對機械表了解一點的人都知道，全自動機械表是完全依靠手臂的擺動完成上弦的。所以一旦手表放置時間過長或者每天手臂的活動量沒有達到手表上弦要求的話，手表會導致發條因為上弦而勢能不足，從而引起了手表走時不穩定或者在夜間不佩戴的時候出現停走的情況。如果遇到此種情況，我們可以在手表放置之前手動的做弧線運動�；蛘呤褂檬謩由舷夜δ軐κ直磉M行上弦。這樣保持手表有足夠的動能儲存維持手表運轉到第二天。

　　Watch lockout: know about mechanical watch a little knows, automatic mechanical watch is completely depend on the motion of the arm to complete the bent. So once the watch place time is too long or bent arm activity wasn＇t up to watch every day requirements, watches can lead to spring for the string ａnd the potential energy is insufficient, thus caused the watches as unstable or don＇t wear in the night come when you least expect them to stop walking. If you encounter this situation, we can do it manually before watch placed arcs. Or use the manual winding function for winding the watch. So keep watch enough kinetic energy storage, watch running to the next day.

　　手表磕碰：因為手表在佩戴的過程中，大多數的時間都是裸露在外面的，所以在走路做事的時候很容易磕到其他的硬物。如果在日常的使用中不小心磕到或者摔到手表，用力撞擊到手表，就可能會導致手表里面的機芯齒輪等零部件產生松動，錯位等情況，這樣也會導致機械表出現偷停的情況。這種情況發生時，我們需要到手表維修店里面進行檢修。日常佩戴時要盡量避免碰撞和劇烈運動。

　　Watch knock against, because watches in the process of wear, most of the time are bare outside, so work in walk easily into the other hard objects. If in the course of everyday use accidentally into the or to watch, hard hit the watch, it may lead to the inside of the watch machine core gear such as loose parts, dislocation, etc., it also can lead to mechanical watch steal stop condition. When this happens, we need to watch repair shop for maintenance. Try to avoid a collision ａnd strenuous exercise daily wear.

　　游絲問題：游絲故障也是導致機械表在正常走時的時候出現偷停情況的原因。前面我們說的有的人因為活動量不足導致手表偷停，還有如果活動量過大的話，長時間會因為發條變緊而引起上條機構故障。同樣會引起動力不足。一般此種停走會發生在晚上九點至十二點鐘左右，此時，帶日歷功能的手表時針輪回帶動日歷輪盤。直接導致動力不足日歷卡殼停走。

　　Also add to the balance spring problem: balance spring failure mechanical watch when normal walking to steal one of reasons for stopping. Front we said some people because of the lack of activity leads to watch steal stop, ａnd if the activity is too large, will for a long time because of a clockwork article on tight ａnd cause failure. Can also cause lack of power. General will happen this stop walking around nine o ＇clock to twelve o ＇clock in the evening, at this time, watch the clock with calendar function cycle calendar wheel. As a direct result of underpowered calendar jam stopped walking.

　　以上三種是導致機械表停走的三個方面的原因。此外還有一些其他的諸如手表受磁，油泥過多等情況同樣會導致機械表停走。如果發現手表在正常佩戴的過程中出現停走的話，應該及時的對手表采取措施盡快排除故障。如果涉及到機械表機芯等故障的部位則需要將手表送往專業的手表維修中心進行檢測維修。

　　All three of these are mechanical watch had stopped three reasons. In addition there are other such as watches by magnetic, excessive sludge ａnd other conditions can also lead to mechanical watch had stopped. If you find a watch in the process of normal wear appeared stop walking, something should be done in a timely manner to watch troubleshooting as soon as possible. When it comes to mechanical watch movement of fault areas will need to watch to professional maintenance watch repair centers for testing.